This book introduces the 3R concept applied to wastewater treatment and resource recovery under a double perspective. Firstly, it deals with innovative technologies leading to: Reducing energy requirements, space and impacts; Reusing water and sludge of sufficient quality; and Recovering resources such as energy, nutrients, metals and chemicals, including biopolymers. Besides targeting effective C,N&P removal, other issues such as organic micropollutants, gases and odours emissions are considered. Most of the technologies analysed have been tested at pilot- or at full-scale. Tools and methods for their Economic, Environmental, Legal and Social impact assessment are described. The 3R concept is also applied to Innovative Processes design, considering different levels of innovation: Retrofitting, where novel units are included in more conventional processes; Re-Thinking, which implies a substantial flowsheet modification; and Re-Imagining, with completely new conceptions. Tools are presented for Modelling, Optimising and Selecting the most suitable plant layout for each particular scenario from a holistic technical, economic and environmental point of view.

Clean Energy and Resource Recovery: Wastewater Treatment Plants as Bio-refineries, Volume 2, summarizes the fundamentals of various treatment modes applied to the recovery of energy and value-added products from wastewater treatment plants. The book addresses the production of biofuel, heat, and electricity, chemicals, feed, and other products from municipal wastewater, industrial wastewater, and sludge. It intends to provide the readers an account of up-to-date information on the recovery of biofuels and other value-added products using conventional and advanced technological developments. The book starts with identifying the key problems of the sectors and then provides solutions to them with step-by-step guidance on the implementation of processes and procedures. Titles compiled in this book further explore related issues like the safe disposal of leftovers, from a local to global scale. Finally, the book sheds light on how wastewater treatment facilities reduce stress on energy systems, decrease air and water pollution, build resiliency, and drive local economic activity.As a compliment to Volume 1: Biomass Waste Based Biorefineries, Clean Energy and Resource Recovery, Volume 2: Wastewater Treatment Plants as Bio-refineries is a comprehensive reference on all aspects of energy and resource recovery from wastewater. The book is going to be a handy reference tool for energy researchers, environmental scientists, and civil, chemical, and municipal engineers interested in waste-to-energy. - Offers a comprehensive overview of the fundamental treatments and methods used in the recovery of energy and value-added products from wastewater - Identifies solutions to key problems related to wastewater to energy/resource recovery through conventional and advanced technologies and explore the alternatives - Provides step-by-step guidance on procedures and calculations from practical field data - Includes successful case studies from both developing and developed countries

This book introduces advanced or emerging technologies for conversion of wastes into a variety of high-value chemicals and materials. Energy and resources can be recovered from various residential, industrial and commercial wastes, such as municipal wastewater and sludge, e-waste, waste plastics and resins, crop residues, forestry residues and lignin. Advanced waste-to-resource and energy technologies like pyrolysis, hydrothermal liquefaction, fractionation, de-polymerization, gasification and carbonization are also introduced. The book serves as an essential guide to dealing with various types of wastes and the methods of disposal, recovery, recycling and re-use. As such it is a valuable resource for a wide readership, including graduate students, academic researchers, industrial researchers and practitioners in chemical engineering, waste management, waste to energy and resources conversion and biorefinery.

Sustainable Resource Recovery and Zero Waste Approaches covers waste reduction, biological, thermal and recycling methods of waste recovery, and their conversion into a variety of products. In addition, the social, economic and environmental aspects are also explored, making this a useful textbook for environmental courses and a reference book for both universities and companies. - Provides a novel approach on how to achieve zero wastes in a society - Shows the roadmap on achieving Sustainable Development Goals - Considers critical aspects of municipal waste management - Covers recent developments in waste biorefinery, thermal processes, anaerobic digestion, material recycling and landfill mining

This book provides a basic understanding of waste management problems and issues faced by modern society. Scientific, technical, and environmental principles are emphasized to illustrate the processes of municipal and industrial solid wastes and liquid wastes, and the nature of impacts resulting from waste dispersal and disposal in the environment. Economic, social, legal, and political aspects of waste management are also addressed. Environmental issues and concerns receive thorough coverage in discussing waste reduction, resource recovery, and efficient and practical waste disposal systems. Other specific topics include recycling, physical and chemical processing, the biological treatment of waste solids, incineration, pyrolysis, and energy recover, hazardous wastes, and landfill management.The role of government and other institutions in waste management and resource recovery matters is also detailed. Discussion questions, worked examples, and end-of-chapter problems reinforce important concepts. Waste Management and Resource Recovery is particularly suitable as a text in waste management courses in environmental science or engineering programs. It also works well as a reference for practitioners in the waste management field.

Current development results in a linear flow from raw material to waste, which cannot be sustainable in the long term. Plus, a global population of 7 billion people means that there are 7 billion waste producers in the world. At present, dumping and landfilling are the primary practices for getting rid of municipal solid waste (MSW). However, this waste contains resources that we’ve yet to utilize. To create sustainable societies, we need to approach zero waste by recovering these resources. There are cities and countries where zero waste is close to becoming a reality. Landfilling of organic waste is forbidden in Europe, and countries such as Sweden, Germany, Belgium, and Switzerland have developed a variety of technologies to recover resources from MSW. Resource Recovery to Approach Zero Municipal Waste explores the solid waste management laws and regulations of different countries, comparing the latest resource recovery technologies and offering future perspectives. The book tackles the many technical, social, ecological, economical, and managerial aspects of this complex subject while promoting the development of sustainable societies to achieve a greener global environment.

Environmental Materials and Waste: Resource Recovery and Pollution Prevention contains the latest information on environmental sustainability as a wide variety of natural resources are increasingly being exploited to meet the demands of a worldwide growing population and economy. These raw materials cannot, or can only partially, be substituted by renewable resources within the next few decades. As such, the efficient recovery and processing of mineral and energy resources, as well as recycling such resources, is now of significant importance. The book takes a multidisciplinary approach to fully realize the number of by-products which can be remanufactured, providing the foundation needed across disciplines to tackle this issue. As awareness and opportunities to recover valuable resources from process and bleed streams is gaining interest, sustainable recovery of environmental materials, including wastewater, offers tremendous opportunity to combine profitable and sustainable production. - Presents a state-of-the-art guide to environmental sustainability - Provides an overview of the field highlighting recent and emerging issues in environmental resource recovery that cover a wide array of by-products for remanufacture potential - Details a multidisciplinary approach to fully realize the number of by-products which can be remanufactured, providing the foundation needed across disciplines to tackle these global issues

Clean Energy and Resource Recovery from Biomass Wastes, Volume 1 presents the technological options, both conventional and advanced, for energy and resources recovery from all types of organic wastes. The book addresses municipal and industrial sludges, municipal solid waste, agro-residue, animal wastes, industrial waste, forestry residue, and algal biomass, and provides a global overview of biomass waste production, waste handling issues and related GHG emissions and climate change, legislative waste management guidelines, biomass composition, and conventional methods for biomass waste treatment. For each biomass waste the chapters will cover energy and bio-based products recovery, pre-treatment methods, process microbiology, community dynamics, co-digestion, reactor design and configuration, and techno-economic evaluation. Case studies on upscaling technology and pilot and industry scale implementation are included, alongside step-by-step calculations that integrate practical field data and regulatory requirements into the environmental design process. Finally, future trends and developments in advanced biotechnological concepts for biomass waste processing and management are discussed. Clean Energy and Resource Recovery from Biomass Wastes, Volume 1 provides an ideal reference for graduate students and researchers interested in bioenergy and renewable energy, and environmental engineers and industry practitioners involved in waste management and resource recovery. Comprehensive coverage of all treatment technologies from waste biomass for bioenergy and related bio-products Provides innovative strategies to increase the efficiency of anaerobic digestion, including during pre- and post-treatment Includes industry case studies showing successful implementation processes and strategies

Resource recovery and recycling from millions of tons of wastes produced from industrial activities is a continuing challenge for environmental engineers and researchers. Demand for conservation of resources, reduction in the quantity of waste and sustainable development with environmental control has been growing in every part of the world. Resource Recovery and Recycling from Metallurgical Wastes brings together the currently used techniques of waste processing and recycling, their applications with practical examples and economic potentials of the processes. Emphasis is on resource recovery by appropriate treatment and techniques. Material on the subject is scatterend in waste management and environmental related journals, conference volumes and government departmental technical reports. This work serves as a source book of information and as an educational technical reference for practicing scientists and engineers, as well as for students. - Describes the currently used and potential techniques for the recovery of valuable resources from mineral and metallurgical wastes - Discusses the applications to specific kinds of wastes with examples from current practices, as well as eht economics of the processes - Presents recent and emerging technologies of potentials in metal recycling and by-product utilization

The collection, transportation and subsequent processing of waste materials is a vast field of study which incorporates technical, social, legal, economic, environmental and regulatory issues. Common waste management practices include landfilling, biological treatment, incineration, and recycling – all boasting advantages and disadvantages. Waste management has changed significantly over the past ten years, with an increased focus on integrated waste management and life-cycle assessment (LCA), with the aim of reducing the reliance on landfill with its obvious environmental concerns in favour of greener solutions. With contributions from more than seventy internationally known experts presented in two volumes and backed by the International Waste Working Group and the International Solid Waste Association, detailed chapters cover: Waste Generation and Characterization Life Cycle Assessment of Waste Management Systems Waste Minimization Material Recycling Waste Collection Mechanical Treatment and Separation Thermal Treatment Biological Treatment Landfilling Special and Hazardous Waste Solid Waste Technology & Management is a balanced and detailed account of all aspects of municipal solid waste management, treatment and disposal, covering both engineering and management aspects with an overarching emphasis on the life-cycle approach.