This e-book presents a selection of papers focused on some novel aspects of electrodeposited coatings, in particular for medical applications. The biocoatings applied for surface modification of load-bearing implants are still being developed, especially for titanium implants, for which hundreds and thousands of possible technical solutions have been proposed using different techniques and materials. This book is a collection of papers that demonstrate appropriate attempts using various electrodeposition methods. The specific objectives are different, with several looking for improved bioactivity, another for antibacterial properties, and another for increased adhesion on the helix lines on dental implants. The e-book starts with a paper on the methodic development of electrodes for electrowinning. This is followed by paper on the real performance of the surface of dental implants, a subject not often addressed. The next paper focuses on electro-oxidation: a novel two-stage oxidation method, characteristic of the oxide layer on helix line of a model dental implant, and micro-arc oxidation of 3D printed titanium. The last paper focuses on coatings, describing the carbon nanotubes- (hydroxyapatite, chitosan), Eudragit-, and Fe-containing coatings. The e-book concludes with a review of all electrodeposition methods. It is a collection of papers describing novel results in electrodeposition biocoatings, which will be of interest for many scholars and researchers.

Electrodeposition allows the "tailoring" of surface properties of a bulk material or, in the case of electroforming, the entire part. Deposits can be produced to meet a variety of designer demands. For this reason and for the possibilities that exist in terms of "new materials" for a variety of applications, a thorough understanding of the materials science of electrodeposition is of utmost importance. This book provides that understanding.

Surface engineering can be defined as an enabling technology used in a wide range of industrial activities. Surface engineering was founded by detecting surface features which destroy most of pieces, e.g. abrasion, corrosion, fatigue, and disruption; then it was recognized, more than ever, that most technological advancements are constrained with surface requirements. In a wide range of industry (such as gas and oil exploitation, mining, and manufacturing), the surfaces generate an important problem in technological advancement. Passing time shows us new interesting methods in surface engineering. These methods usually apply to enhance the surface properties, e.g. wear rate, fatigue, abrasion, and corrosion resistance. This book collects some of new methods in surface engineering.

The authors provide new insights into the theoretical and applied aspects of metal electrodeposition. The theory largely focuses on the electrochemistry of metals. Details on the practice discuss the selection and use of metal coatings, the technology of deposition of metals and alloys, including individual peculiarities, properties and structure of coatings, control and investigations. This book aims to acquaint advanced students and researchers with recent advances in electrodeposition while also being an excellent reference for the practical electrodeposition of metals and alloys.

This book covers a wide range of advanced analytical tools, from electrochemical to in-situ/ex-situ material characterization techniques, as well as the modeling of corrosion systems to foster understanding and prediction. When used properly, these tools can enrich our understanding of material performance (metallic materials, coatings, inhibitors) in various environments/contexts (aqueous corrosion, high-temperature corrosion). The book encourages researchers to develop new corrosion-resistant materials and supports them in devising suitable asset integrity strategies. Offering a valuable resource for researchers, industry professionals, and graduate students alike, the book shows them how to apply these valuable analytical tools in their work.

Nanocomposite coatings have various properties that can be utilized for corrosion protection and tribological improvements. Synthesis of the nanocomposite coatings using an electrodeposition method allows unique control of the experimental parameters. By fine tuning the experimental parameters, various compositions and properties can be obtained for the nanocomposite coatings. This book covers some of the electrochemical methods used for nanocomposite coating deposition as well as discusses in detail examples of several nanocomposite coating. The corrosion and tribological performance of the nanocomposite coatings are also covered and some nanocomposite coatings are discussed for specific technological areas, such as fuel cells and microelectronics.

The role of manufacturing in a country’s economy and societal development has long been established through their wealth generating capabilities. To enhance and widen our knowledge of materials and to increase innovation and responsiveness to ever-increasing international needs, more in-depth studies of functionally graded materials/tailor-made materials, recent advancements in manufacturing processes and new design philosophies are needed at present. The objective of this volume is to bring together experts from academic institutions, industries and research organizations and professional engineers for sharing of knowledge, expertise and experience in the emerging trends related to design, advanced materials processing and characterization, and advanced manufacturing processes.

Arising from an examination in 1969 of the education and trammg opportumtles for paint industry technicians, it was recognized that the various courses available at that time did not fully serve their needs. While a few large companies had developed in-house training arrangements, the many medium and smaller fi.rms in the raw material supply, paint manufacturing or paint user industries, were unable to provide their own comprehensive training programs. With a view to improving this situation, an advisory committee comprising ofrepresentatives of the Australian Paint Manufacturers' Federation and the Oil and Colour Chemists' Association Australia was established to liaise directly with the New South Wales Department of Technical and Further Education. As a result plans were developed for the introduction of a Special Course in 'Surface Coatings Technology' in 1971, conducted by the Sydney Technical College. The scope of the course was designed to cover all aspects of surface coatings technology ranging from raw materials and formulations to the production, testing, evaluation, application and use of finished products. The course proved to be highly successful and in 1973 a similar syllabus was introduced by the Melboume School of Painting, Decorating and Signcrafts in Victoria. In 1980, New Zealand followed suit with a similar course conducted by the Auckland Technical Institute.

This book covers a broad range of materials science that has been brought to bear on providing solutions to the challenges of developing self-healing and protective coatings for a range of metals. The book has a strong emphasis on characterisation techniques, particularly new techniques that are beginning to be used in the coatings area. It features many contributions written by experts from various industrial sectors which examine the needs of the sectors and the state of the art. The development of self-healing and protective coatings has been an expanding field in recent years and applies a lot of new knowledge gained from other fields as well as other areas of materials science to the development of coatings. It has borrowed from fields such as the food and pharmaceutical industries who have used, polymer techniques, sol-gel science and colloidosome technology for a range encapsulation techniques. It has also borrowed from fields like hydrogen storage such as from the development of hierarchical and other materials based on organic templating as “nanocontainers” for the delivery of inhibitors. In materials science, recent developments in high throughput and other characterisation techniques, such as those available from synchrotrons, are being increasing used for novel characterisation – one only needs to look at the application of these techniques in self healing polymers to gauge wealth of new information that has been gained from these techniques. This work is largely driven by the need to replace environmental pollutants and hazardous chemicals that represent risk to humans such as chromate inhibitors which are still used in some applications.

Includes monthly "Abstracts of recent literature relating to non-ferrous and ferrous metals."