by Conference Chairman n1 It is my pleasure to introduce this volume of Proceedings for the 33 MATADOR Conference. The Proceedings include 83 refereed papers submitted from 19 countries on 4 continents. 00 The spread of papers in this volume reflects four developments since the 32 MATADOR Conference in 1997: (i) the power of information technology to integrate the management and control of manufacturing systems; (ii) international manufacturing enterprises; (iii) the use of computers to integrate different aspects of manufacturing technology; and, (iv) new manufacturing technologies. New developments in the manufacturing systems area are globalisation and the use of the Web to achieve virtual enterprises. In manufacturing technology the potential of the following processes is being realised: rapid proto typing, laser processing, high-speed machining, and high-speed machine tool design. And, at the same time in the area of controls and automation, the flexibility and integration ability of open architecture computer controllers are creating a wide range of opportunities for novel solutions. Up-to-date research results in these and other areas are presented in this volume. The Proceedings reflect the truly international nature of this Conference and the way in which original research results are both collected and disseminated. The volume does not, however, record the rich debate and extensive scientific discussion which took place during the Conference. I trust that you will find this volume to be a permanent record of some of the research carried out in the last two years; and.

Presented here are 73 refereed papers given at the 34th MATADOR Conference held at UMIST in July 2004. The MATADOR series of conferences covers the topics of Manufacturing Automation and Systems Technology, Applications, Design, Organisation and Management, and Research. The 34th proceedings contains original papers contributed by researchers from many countries on different continents. The papers cover both the technological aspect of manufacturing processes; and the systems, business and management features of manufacturing enterprise. The papers in this volume reflect: - the importance of manufacturing to international wealth creation; - the necessity of responsiveness and agility of manufacturing companies to meet market-led requirements and international change; - the role of information technology and electronic communications in the growth of global manufacturing enterprises; - the impact of new technologies, new materials and processes, on the ability to produce goods of higher quality, more quickly, to meet markets needs at a lower cost. Some of the major generic developments which have taken place in these areas since the 33rd MATADOR conference was held in 2000 are reported in this volume.

This volume includes papers presented at SOCO 2017, CISIS 2017, and ICEUTE 2017, all conferences held in the beautiful and historic city of León (Spain) in September 2017. Soft computing represents a collection of computational techniques in machine learning, computer science, and some engineering disciplines, which investigate, simulate, and analyze highly complex issues and phenomena. These proceeding s feature 48 papers from the 12th SOCO 2017, covering topics such as artificial intelligence and machine learning applied to health sciences; and soft computing methods in manufacturing and management systems. The book also presents 18 papers from the 10th CISIS 2017, which provided a platform for researchers from the fields of computational intelligence, information security, and data mining to meet and discuss the need for intelligent, flexible behavior by large, complex systems, especially in mission-critical domains. It addresses various topics, like identification, simulation and prevention of security and privacy threats in modern communication networks Furthermore, the book includes 8 papers from the 8th ICEUTE 2017. The selection of papers for all three conferences was extremely rigorous in order to maintain the high quality and we would like to thank the members of the Program Committees for their hard work in the reviewing process.

Ann Macintosh Napier University, UK The papers in this volume are the refereed application papers presented at ES2001, the Twenty-fIrst SGES International Conference on Knowledge Based Systems and Applied ArtifIcial Intelligence, held in Cambridge in December 200 I. The scope of the application papers has expanded over recent years to cover not just innovative applications using traditional knowledge based systems, but also to include applications demonstrating the whole range of AI technologies. These papers continue to illustrate the maturity of AI as a commercially viable technology to solve real world problems. The papers were subject to refereeing by at least two expert referees. All papers that were in any way controversial were discussed in depth by the Application Programme Committee. For the ES2001 Application Stream, a paper is acceptable even if it describes a system that has not yet been installed, provided the application is original and the paper discusses the kind of things that would help others needing to solve a similar problem. Papers have been selected to highlight critical areas of success - and failure - and to present the benefIts and lessons learnt to other developers. This volume contains sixteen papers describing deployed or emerging applications in a range of diverse areas: business and commerce, engineering, manufacturing, knowledge and information management, and music.

A deductive kinematic model of creep-feed and speed-stroke grinding processes is developed to identify possibilities to reduce the energy introduced into the workpiece. By computer tomography analysis and tactile measurements of the grinding wheel the pore volume and the static cutting edge number are determined and included in the model. Based on the kinematic model and the grinding wheel characteristics an analytical evaluation of the specific grinding energy for speed-stroke and creep-feed grinding is carried out. The deducted process design is evaluated in experimental investigations. The generated model is evaluated by determining specific process values for the grinding forces and the grinding energy.

Advances in Manufacturing Technology XVI provides a comprehensive collection of papers exploring the very latest developments in the field of manufacturing engineering and managment and incorporates the most up-to-date techniques. TOPICS COVERED INCLUDE: Business strategies process reengineering CAD/CAM and concurrent engineering E-manufacturing and virtual reality Engineering modelling and simulations Total quality management and metrology Intelligent systems. robotics and automation Lean and agiel manufacturing Machining process and tooling Operations management Process control and condition monitoring Covering all aspects of manufacturing engineering, systems, and management this volume will be of great interest to those wanting to keep abreast pf current research and those involved in the planning stages in this area of engineering.

Tungsten Carbide - Processing and Applications, provides fundamental and practical information of tungsten carbide from powder processing to machining technologies for industry to explore more potential applications. Tungsten carbide has attracted great interest to both engineers and academics for the sake of its excellent properties such as hard and wear-resistance, high melting point and chemically inert. It has been applied in numerous important industries including aerospace, oil and gas, automotive, semiconductor and marine as mining and cutting tools, mould and die, wear parts, etc., which also has a promising future particularly due to enabling to resist high temperature and are extremely hard.

This book presents selected research papers of the AIMTDR 2014 conference on application of laser technology for various manufacturing processes such as cutting, forming, welding, sintering, cladding and micro-machining. State-of-the-art of these technologies in terms of numerical modeling, experimental studies and industrial case studies are presented. This book will enrich the knowledge of budding technocrats, graduate students of mechanical and manufacturing engineering, and researchers working in this area.

Presented here are 97 refereed papers given at the 37th MATADOR Conference held at The University of Manchester in July 2012. The MATADOR series of conferences covers the topics of Manufacturing Automation and Systems Technology, Applications, Design, Organisation and Management, and Research. The Proceedings of this Conference contain original papers contributed by researchers from many countries on different continents. The papers cover the principles, techniques and applications in aerospace, automotive, biomedical, energy, consumable goods and process industries. The papers in this volume reflect: the importance of manufacturing to international wealth creation; the emerging fields of micro- and nano-manufacture; the increasing trend towards the fabrication of parts using lasers; the growing demand for precision engineering and part inspection techniques, and the changing trends in manufacturing within a global environment.