The aim of this book is to summarize probabilistic safety assessment (PSA) of nuclear power plants with WWER440 reactors and demonstrate that the plants are safe enough for producing energy even in light of the Fukushima accident. The book examines level 1 and 2 full power, low power and shutdown PSA, and summarizes the author’s experience gained during the last 35 years in this area. It provides useful examples taken from PSA training courses the author has lectured and organized by the International Atomic Energy Agency. Such training courses were organised in Argonne National Laboratory (Chicago, IL, USA), Abdus Salaam International Centre for Theoretical Physics (Trieste, Italy), Malaysia, Vietnam and Jordan to support experts from developing countries. The role of PSA for the plants is an estimation of the risks in absolute terms and in comparison with other risks of the technical and the natural world. Plant-specific PSAs are being prepared for the plants and being applied for detection of weaknesses, design improvement and backfitting, incident analysis, accident management, emergency preparedness, prioritization of research and development and to support the regulatory activities. There are three levels of PSA, being performed for full power and low power operation and shutdown operating modes of the plants: level 1, 2 and 3 PSA. The nuclear regulatory authorities do not require the level 3 PSA for the plants in the member countries of the European Union. This means that only a limited number of NPPs in Europe have the level 3 PSA available. However, in the light of the Fukushima accident the performance of such analyses is strongly recommended in the future. This book is intended for professionals working in the nuclear industry, researchers and students interested in safety of operational plants.

The aim of this book is to summarize probabilistic safety assessment (PSA) of nuclear power plants with WWER440 reactors and demonstrate that the plants are safe enough for producing energy even in light of the Fukushima accident. The book examines level 1 and 2 full power, low power and shutdown PSA, and summarizes the author’s experience gained during the last 35 years in this area. It provides useful examples taken from PSA training courses the author has lectured and organized by the International Atomic Energy Agency. Such training courses were organised in Argonne National Laboratory (Chicago, IL, USA), Abdus Salaam International Centre for Theoretical Physics (Trieste, Italy), Malaysia, Vietnam and Jordan to support experts from developing countries. The role of PSA for the plants is an estimation of the risks in absolute terms and in comparison with other risks of the technical and the natural world. Plant-specific PSAs are being prepared for the plants and being applied for detection of weaknesses, design improvement and backfitting, incident analysis, accident management, emergency preparedness, prioritization of research and development and to support the regulatory activities. There are three levels of PSA, being performed for full power and low power operation and shutdown operating modes of the plants: level 1, 2 and 3 PSA. The nuclear regulatory authorities do not require the level 3 PSA for the plants in the member countries of the European Union. This means that only a limited number of NPPs in Europe have the level 3 PSA available. However, in the light of the Fukushima accident the performance of such analyses is strongly recommended in the future. This book is intended for professionals working in the nuclear industry, researchers and students interested in safety of operational plants.

A collection of papers presented at the PSAM 7 – ESREL ’04 conference in June 2004, reflecting a wide variety of disciplines, such as principles and theory of reliability and risk analysis, systems modelling and simulation, consequence assessment, human and organisational factors, structural reliability methods, software reliability and safety, insights and lessons from risk studies and management/decision making. This volume covers both well-established practices and open issues in these fields, identifying areas where maturity has been reached and those where more development is needed.

Today's nuclear reactors are safe and highly efficient energy systems that offer electricity and a multitude of co-generation energy products ranging from potable water to heat for industrial applications. At the same time, catastrophic earthquake and tsunami events in Japan resulted in the nuclear accident that forced us to rethink our approach to nuclear safety, design requirements and facilitated growing interests in advanced nuclear energy systems, next generation nuclear reactors, which are inherently capable to withstand natural disasters and avoid catastrophic consequences without any environmental impact. This book is one in a series of books on nuclear power published by InTech. Under the single-volume cover, we put together such topics as operation, safety, environment and radiation effects. The book is not offering a comprehensive coverage of the material in each area. Instead, selected themes are highlighted by authors of individual chapters representing contemporary interests worldwide. With all diversity of topics in 16 chapters, the integrated system analysis approach of nuclear power operation, safety and environment is the common thread. The goal of the book is to bring nuclear power to our readers as one of the promising energy sources that has a unique potential to meet energy demands with minimized environmental impact, near-zero carbon footprint, and competitive economics via robust potential applications. The book targets everyone as its potential readership groups - students, researchers and practitioners - who are interested to learn about nuclear power.

IE-2 > FV 5E-3 > FV IE-3 > FV IE-4 > FV Trun- Total IST and IST Components Total IST FV> IE-2 Type >5E-3 > IE-3 > IE-4 >0 cated IPE Components Not Modeled in PRA Components 11 3 6 5 27 73 100 AOV 2 CV 4 21 24 16 12 77 94 171 4 6 10 HOV 4 34 158 MOV 2 5 35 33 24 25 124 43 43 MV 2 PORV 1 1 2 PUMP 12 5 6 1 3 27 9 36 54 54 SOV SRV 20 3 23 23 Total 39 17 73 61 49 45 284 313 597 ------- --- Table 2. Levell IPEEE Basic Event Importance - Risk Achievement Worth Total IST and (PE IST Components Not Total IST 2>RAW>0 Truncated Type RAW>2 Components Modeled in PRA Components 100 AOV 13 9 5 27 73 CV 52 16 9 77 94 171 4 4 6 10 HOV MOV 60 54 10 124 34 158 43 43 MV PORV 2 2 2 PUMP 24 3 27 9 36 SOV 54 54 SRV 23 23 23 597 Total 155 102 27 284 313 ~~--- -. . j S 702 and 2 includes the following IST component types: pumps, air-operated valves (AOV), check valves (CV), hydraulically-operated valves (HOV), motor-operated valves (MOV), manual valves (MV), pressurizer power-operated relief valves (PORV), solenoid operated valves (SOV), and safety reliefvalves (SRV).

Proceedings of a symposium jointly organized with ANS, ENS and OECD/NEA, Vienna, 3-7 June 1991. During recent years the development of PSA has been directed towards its use as a practical tool for the enhancement of operational safety. Only plant specific analysis can provide a basis for meaningful risk management. The importance of human interventions in the recovery from degraded states of operation, the importance of inclusion of external events in PSA, the determination of potentials for common cause failures and the importance of treating and communicating the uncertainties have already been well established within the PSA community. Also, risks during low power level and shutdown states have become more recognized.

Describes international approaches for maintaining fuel subcritical, removing residual heat, providing radiation protection and containing radioactive materials for the lifetime of a facility. It is intended to provide details on the safety assessment of interim spent fuel storage facilities that are not an integral part of an operating plant.