Aereas is dead. His daughter is growing up to be a beautiful woman, learning from her unle the business of espionage. Nina is close to dying. Her son is training in music at the shop of Boffo the Gnome. The Blood War itself still rages. Even the heavens shake with its fury, and they may well topple, unless these children of heroes truly bear their parents' blood.

This report presents design concepts and experimental data of planar active antenna and quasi-optical power combining arrays with strong coupling to realize a compact and low-cost radar and communication system. The prototype circuits for this purpose were made in a layered configuration using microstrip lines and in a uniplanar structure using CPW's. As an active source, an FET was selected. As a unit cell of the power combining array, a single layered active antenna using microstrip lines and slots was fabricated. In the design, small signal S-parameters were used to determine the circuit configuration while a large signal analysis to the entire circuit involving the slot antenna input impedance was carried out. The circuit designed for 10 GHz was found to operate at 9.3 GHz and the other designed for 25 GHz at 24 GHz. In addition, the circuit with CPW's and slot designed for 10 GHz was found to operate at 8.6 GHz. Based on these successful results, linear power combining arrays were made. For the strong coupling, each oscillator output is connected by a single transmission line. Several 6-element microstrip arrays and a 4-element CPW array were fabricated. In the former, sharp main beams were obtained. To obtain a millimeter-wave operating frequency, the second harmonic spatial power combining array made with FET's were demonstrated around 40 GHz. To show a topology of a 2-dimensional array, a 16-element dual polarized array at 7.8 GEL was made. To obtain the maximum in-phase radiation signal, impedance matching, a phase of the radiation signal and a signal phase of each oscillator were taken into account ... Active antenna, Quasi-optical technique, Optical control, Spatial power combiner.

This new handbook is the complete guide to integrating planar travel into anyD&D( campaign.

The world we know is but one reality. Countless others exist in the realms beyond. Dimensions carved from dreams. Worlds constructed from pure life energy. First drafts of our consciousness, and shadows of the same. Entire realities populated by angels and demons, ruled by deities and subject to physical laws mortals can barely comprehend. This is the Great Beyond, and within its reaches, the possibilities for grand adventure or devastating defeat are truly endless. This far-reaching hardcover rulebook explores Pathfinder RPG Planar Adventures explores the wondrous and horrifying regions that comprise the other dimensions and planes of reality that feature in the Pathfinder Roleplaying Game. This imaginative tabletop game builds upon more than 10 years of system development and an open playtest featuring more than 50,000 gamers to create a cutting-edge RPG experience that brings the all-time best-selling set of fantasy rules into a new era.

During the last 30 years, significant progress has been made to improve our understanding of gallium nitride and silicon carbide device structures, resulting in experimental demonstration of their enhanced performances for power electronic systems. Gallium nitride power devices made by the growth of the material on silicon substrates have gained a lot of interest. Power device products made from these materials have become available during the last five years from many companies.This comprehensive book discusses the physics of operation and design of gallium nitride and silicon carbide power devices. It can be used as a reference by practicing engineers in the power electronics industry and as a textbook for a power device or power electronics course in universities.

Electrochemical Power Sources (EPS) provides in a concise way the operational features, major types, and applications of batteries, fuel cells, and supercapacitors • Details the design, operational features, and applications of batteries, fuel cells, and supercapacitors • Covers improvements of existing EPSs and the development of new kinds of EPS as the results of intense R&D work • Provides outlook for future trends in fuel cells and batteries • Covers the most typical battery types, fuel cells and supercapacitors; such as zinc-carbon batteries, alkaline manganese dioxide batteries, mercury-zinc cells, lead-acid batteries, cadmium storage batteries, silver-zinc batteries and modern lithium batteries

Less expensive, lighter, and smaller than its electromechanical counterparts, power electronics lie at the very heart of controlling and converting electric energy, which in turn lies at the heart of making that energy useful. From household appliances to space-faring vehicles, the applications of power electronics are virtually limitless. Until now, however, the same could not be said for access to up-to-date reference books devoted to power electronics. Written by engineers for engineers, The Power Electronics Handbook covers the full range of relevant topics, from basic principles to cutting-edge applications. Compiled from contributions by an international panel of experts and full of illustrations, this is not a theoretical tome, but a practical and enlightening presentation of the usefulness and variety of technologies that encompass the field. For modern and emerging applications, power electronic devices and systems must be small, efficient, lightweight, controllable, reliable, and economical. The Power Electronics Handbook is your key to understanding those devices, incorporating them into controllable circuits, and implementing those systems into applications from virtually every area of electrical engineering.

A single text that incorporates all of the theoretical principles and practical aspects of planar transmission line devices - since the early development of striplines, it has been sought by countless microwave engineers, researchers, and students. With the publication of Networks and Devices Using Planar Transmission Lines, the search for that one authoritative resource is over. This is more than just a handbook, much more than a theoretical treatment. It's the ideal integration of the theory and applications of planar transmission lines and devices. Striplines, microstrips, slot lines, coplanar waveguides and strips, phase shifters, hybrids, and more - the author examines them all. For each type of structure, his treatment is complete and self-contained, including: Geometric characteristics Electric and magnetic field lines Solution techniques for the electromagnetic problem Quasi-static, coupled modes, and full wave analysis methods Design equations Attenuation Practical considerations Of particular interest is the author's comprehensive treatment of planar ferrimagnetic devices, such as phase shifters, isolators, and circulators, and three appendices dedicated to the theoretical aspects of ferrimagetism. Five other appendices provide thorough reviews of various theoretical concepts implicit in the body of the work, such as wave theory, the external properties of networks, and resonant circuits.

The contributions to this book constitute an excellent record of many key issues and scientific problems in planar lightwave circuit research. There are detailed overviews of experimental and theoretical work in high index contrast waveguide systems, micro-optical resonators, nonlinear optics, and advanced optical simulation methods, as well as articles describing emerging applications of integrated optics for medical and biological applications.

Provides a comprehensive discussion of planar transmission lines and their applications, focusing on physical understanding, analytical approach, and circuit models Planar transmission lines form the core of the modern high-frequency communication, computer, and other related technology. This advanced text gives a complete overview of the technology and acts as a comprehensive tool for radio frequency (RF) engineers that reflects a linear discussion of the subject from fundamentals to more complex arguments. Introduction to Modern Planar Transmission Lines: Physical, Analytical, and Circuit Models Approach begins with a discussion of waves on transmission lines and waves in material medium, including a large number of illustrative examples from published results. After explaining the electrical properties of dielectric media, the book moves on to the details of various transmission lines including waveguide, microstrip line, co-planar waveguide, strip line, slot line, and coupled transmission lines. A number of special and advanced topics are discussed in later chapters, such as fabrication of planar transmission lines, static variational methods for planar transmission lines, multilayer planar transmission lines, spectral domain analysis, resonators, periodic lines and surfaces, and metamaterial realization and circuit models. Emphasizes modeling using physical concepts, circuit-models, closed-form expressions, and full derivation of a large number of expressions Explains advanced mathematical treatment, such as the variation method, conformal mapping method, and SDA Connects each section of the text with forward and backward cross-referencing to aid in personalized self-study Introduction to Modern Planar Transmission Lines is an ideal book for senior undergraduate and graduate students of the subject. It will also appeal to new researchers with the inter-disciplinary background, as well as to engineers and professionals in industries utilizing RF/microwave technologies.