The "Red Book" presents a background to conventional foundation analysis and design. The text is not intended to replace the much more comprehensive 'standard' textbooks, but rather to support and augment these in a few important areas, supplying methods applicable to practical cases handled daily by practising engineers and providing the basic soil mechanics background to those methods. It concentrates on the static design for stationary foundation conditions. Although the topic is far from exhaustively treated, it does intend to present most of the basic material needed for a practising engineer involved in routine geotechnical design, as well as provide the tools for an engineering student to approach and solve common geotechnical design problems.

This book presents computational tools and design principles for piles used in a wide range of applications and for different loading conditions. The chapters provide a mixture of basic engineering solutions and latest research findings in a balanced manner. The chapters are written by world-renowned experts in the field. The materials are presented in a unified manner based on both simplified and rigorous numerical methods. The first four chapters present the basic elements and steps in analysis of piles under static and cyclic loading together with clear references to the appropriate design regulations in Eurocode 7 when relevant. The analysis techniques cover conventional code-based methods, solutions based on pile-soil interaction springs, and advanced 3D finite element methods. The applications range from conventional piles to large circular steel piles used as anchors or monopiles in offshore applications. Chapters 5 to 10 are devoted to dynamic and earthquake analyses and design. These chapters cover a range of solutions from dynamic pile-soil springs to elasto-dynamic solutions of large pile groups. Both linear and nonlinear soil behaviours are considered along with response due to dynamic loads and earthquake shaking including possible liquefaction. The book is unique in its unified treatment of the solutions used for static and dynamic analysis of piles with practical examples of application. The book is considered a valuable tool for practicing engineers, graduate students and researchers.

Pile foundations are the most common form of deep foundations that are used both onshore and offshore to transfer large superstructural loads into competent soil strata. This book provides many case histories of failure of pile foundations due to earthquake loading and soil liquefaction. Based on the observed case histories, the possible mechanisms of failure of the pile foundations are postulated. The book also deals with the additional loading attracted by piles in liquefiable soils due to lateral spreading of sloping ground. Recent research at Cambridge forms the backbone of this book with the design methodologies being developed directly based on quantified centrifuge test results and numerical analysis. The book provides designers and practicing civil engineers with a sound knowledge of pile behaviour in liquefiable soils and easy-to-use methods to design pile foundations in seismic regions. For graduate students and researchers, it brings together the latest research findings on pile foundations in a way that is relevant to geotechnical practice. Sample Chapter(s). Foreword (85 KB). Chapter 1: Performance of Pile Foundations (4,832 KB). Contents: Performance of Pile Foundations; Inertial and Kinematic Loading; Accounting for Axial Loading in Level Ground; Lateral Spreading of Sloping Ground; Axial Loading on Piles in Laterally Spreading Ground; Design Examples. Readership: Researchers, academics, designers and graduate students in earthquake engineering, civil engineering and ocean/coastal engineering.

The revision of this best-selling text for a junior/senior course in Foundation Analysis and Design now includes an IBM computer disk containing 16 compiled programs together with the data sets used to produce the output sheets, as well as new material on sloping ground, pile and pile group analysis, and procedures for an improved anlysis of lateral piles. Bearing capacity analysis has been substantially revised for footings with horizontal as well as vertical loads. Footing design for overturning now incorporates the use of the same uniform linear pressure concept used in ascertaining the bearing capacity. Increased emphasis is placed on geotextiles for retaining walls and soil nailing.

This is a concise, systematic and complete treatment of the design and construction of pile foundations. Discusses pile behavior under various loadings and types of piles and their installation, including consideration of soil parameters. It provides step-by-step design procedures for piles subject to vertical loading and pullout, lateral, inclined and eccentric loads, or dynamic loads, and for piles in permafrost. Also describes load test procedures and their interpretation and buckling of long, slender piles with and without supported length. The closing chapter presents case histories of prediction and performance of piles and pile groups. Includes numerous solved problems.

Foundation Analysis and Design: Innovative Methods covers recent advances in the research and construction of shallow foundations, pile foundations and limit state design. This Geotechnical Special Publication contains 44 technical papers that were presented at the GeoShanghai Conference held in Shanghai, China from June 6-8, 2006. The book begins with a keynote paper by Professor Harry Poulos, which summarizes recent advances in the settlement of pile groups. The next section contains fifteen papers which address statistical applications and the use of limit state design for foundations. The third section contains 25 papers on deep foundations that describe a series of advances in the estimation of pile capacity and pile installation issues. The final section includes three papers that focus on advances in the estimation of settlement associated with shallow foundations.

One-of-a-kind coverage on the fundamentals of foundation analysis and design Analysis and Design of Shallow and Deep Foundations is a significant new resource to the engineering principles used in the analysis and design of both shallow and deep, load-bearing foundations for a variety of building and structural types. Its unique presentation focuses on new developments in computer-aided analysis and soil-structure interaction, including foundations as deformable bodies. Written by the world's leading foundation engineers, Analysis and Design of Shallow and Deep Foundations covers everything from soil investigations and loading analysis to major types of foundations and construction methods. It also features: * Coverage on computer-assisted analytical methods, balanced with standard methods such as site visits and the role of engineering geology * Methods for computing the capacity and settlement of both shallow and deep foundations * Field-testing methods and sample case studies, including projects where foundations have failed, supported with analyses of the failure * CD-ROM containing demonstration versions of analytical geotechnical software from Ensoft, Inc. tailored for use by students in the classroom

Contributions feature the use of in-situ tests in design; recent studies on the full-scale field behavior of pile groups and installation of driven piles; and the design and construction of drilled shaft foundations in hard soils and soft rock.