Orthogonal Frequency Division Multiplexing for Wireless Communications is an edited volume with contributions by leading authorities in the subject of OFDM. Its coverage consists of principles, important wireless topics (e.g. Synchronization, channel estimation, etc.) and techniques. Included is information for advancing wireless communication in a multipath environment with an emphasis on implementation of OFDM in base stations. Orthogonal Frequency Division Multiplexing for Wireless Communications provides a comprehensive introduction of the theory and practice of OFDM. To facilitate the readers, extensive subject indices and references are given at the end of the book. Even though each chapter is written by different experts, symbols and notations in all chapters of the book are consistent.

Orthogonal Frequency Division Multiplexing (OFDM) systems are widely used in the standards for digital audio/video broadcasting, WiFi and WiMax. Being a frequency-domain approach to communications, OFDM has important advantages in dealing with the frequency-selective nature of high data rate wireless communication channels. As the needs for operating with higher data rates become more pressing, OFDM systems have emerged as an effective physical-layer solution. This short monograph is intended as a tutorial which highlights the deleterious aspects of the wireless channel and presents why OFDM is a good choice as a modulation that can transmit at high data rates. The system-level approach we shall pursue will also point out the disadvantages of OFDM systems especially in the context of peak to average ratio, and carrier frequency synchronization. Finally, simulation of OFDM systems will be given due prominence. Simple MATLAB programs are provided for bit error rate simulation using a discrete-time OFDM representation. Software is also provided to simulate the effects of inter-block-interference, inter-carrier-interference and signal clipping on the error rate performance. Different components of the OFDM system are described, and detailed implementation notes are provided for the programs. The program can be downloaded here. Table of Contents: Introduction / Modeling Wireless Channels / Baseband OFDM System / Carrier Frequency Offset / Peak to Average Power Ratio / Simulation of the Performance of OFDM Systems / Conclusions

In an effort to offer faster, more reliable wireless communications services to the public, many wireless standardization committees have, in recent years, adopted Orthogonal Frequency Division Multiplexing (OFDM) as the modulation technique of choice. Given the incredible growth in the industry as manifest by the seemingly infinite demand for wireless products and services and the accompanying need for superior performance of these systems in congested and electronically demanding environments, it is evident that OFDM will be at the core of many future high data rate communications systems. This thesis examines the performance of OFDM in frequency-selective slowly fading Nakagami channels. The Nakagami channel is used in this study as it probably best models the propagation characteristics of the environments in which OFDM based systems will be applied.

Orthogonal Frequency Division Multiplexing (OFDM) systems are widely used in the standards for digital audio/video broadcasting, WiFi and WiMax. Being a frequency-domain approach to communications, OFDM has important advantages in dealing with the frequency-selective nature of high data rate wireless communication channels. As the needs for operating with higher data rates become more pressing, OFDM systems have emerged as an effective physical-layer solution. This short monograph is intended as a tutorial which highlights the deleterious aspects of the wireless channel and presents why OFDM is a good choice as a modulation that can transmit at high data rates. The system-level approach we shall pursue will also point out the disadvantages of OFDM systems especially in the context of peak to average ratio, and carrier frequency synchronization. Finally, simulation of OFDM systems will be given due prominence. Simple MATLAB programs are provided for bit error rate simulation using a discrete-time OFDM representation. Software is also provided to simulate the effects of inter-block-interference, inter-carrier-interference and signal clipping on the error rate performance. Different components of the OFDM system are described, and detailed implementation notes are provided for the programs. The program can be downloaded here. Table of Contents: Introduction / Modeling Wireless Channels / Baseband OFDM System / Carrier Frequency Offset / Peak to Average Power Ratio / Simulation of the Performance of OFDM Systems / Conclusions

This practical book is an accessible introduction to Orthogonal frequency-division multiplexing (OFDM) receiver design, a technology that allows digitized data to be carried by multiple carriers. It offers a detailed simulation study of an OFDM algorithm for Wi-Fi and 4G cellular that can be used to understand other OFDM waveforms. Extensive simulation studies are included using the transmissionwaveform given by the IEEE 802.11 standard. Scrambler, error-correcting codes, interleaver and radio-wave propagation model are included. OFDM waveform characteristics, signal acquisition, synchronization issues, channel estimation and tracking, hard and soft decision decoding are all covered. Detailed derivations leading to the final formula for any algorithm are given, which allows the reader to clearly understand the approximations and conditions behind the formulas and apply them appropriately. The algorithms are selected not just for the best performance from simulation study but also for easy implementation. An example is a unique algorithm for signal acquisition using the principle of maximum likelihood detection.

"The book examines several aspects of Orthogonal Frequency Division Multiplexing (OFDM) employing linear diversity techniques such as inter-carrier interference, bit error rate, peak to average power and inter-block interference. It should be a useful refe"

Thanks to their considerable advantages, index modulation and orthogonal frequency division multiplexing (OFDM) are considered to be promising candidates for future wireless communications. This book focuses on the index modulation techniques for OFDM communications systems, which allow information to be conveyed not only via constellation symbols, but also by the indices of various transmission entities in OFDM systems, such as signal constellations, spreading codes, and pilots. The book discusses representative transmitter and receiver designs, optimization and performance analysis of index modulation based on various transmission entities. It first introduces readers to constellation-based index modulation via a combinatorial approach, including the classical index modulation scheme and two embodiments of information-guided precoding for OFDM systems. It further discusses constellation-based index modulation via a permutational approach, including the basic, generalized, and diversity-enhancing forms. It then describes how the spreading code is used to design an index modulated spread spectrum for OFDM systems, and the extensions to multi-code and multi-user scenarios. In addition it explores information guided pilot insertion for OFDM systems, followed by applications to carrier phase tracking and channel estimation. Lastly, the book highlights a number of open problems and discusses future research directions in the general field of index modulation. Intended for professionals and researchers in the field of wireless communications, this book is also a valuable resource for advanced-level electrical engineering and computer science students.

Thesis (M.A.) from the year 2019 in the subject Electrotechnology, grade: 9, , language: English, abstract: The Orthogonal Frequency Division Multiplexing (OFDM) is an important aspect of multicarrier digital data transmission system where a single data stream is transmitted into a several number of lower rates subcarrier signals. In this thesis, there are five different types of the techniques introduced to strengthen the communication quality and capacity. This kind of new standard of transmission of data is the first one to perform with OFDM in data packet based communication system. In wireless communication network, the abstraction of parallel transmission of data symbols is implemented to attain high throughput and effective transmission quality. The OFDM is a method to deal with parallel transmission.

Orthogonal frequency-division multiplexing (OFDM) is a method of digital modulation in which a signal is split into several narrowband channels at different frequencies. CDMA is a form of multiplexing, which allows numerous signals to occupy a single transmission channel, optimising the use of available bandwidth. Multiplexing is sending multiple signals or streams of information on a carrier at the same time in the form of a single, complex signal and then recovering the separate signals at the receiving end. Multi-Carrier (MC) CDMA is a combined technique of Direct Sequence (DS) CDMA (Code Division Multiple Access) and OFDM techniques. It applies spreading sequences in the frequency domain. Wireless communications has witnessed a tremendous growth during the past decade and further spectacular enabling technology advances are expected in an effort to render ubiquitous wireless connectivity a reality. This technical in-depth book is unique in its detailed exposure of OFDM, MIMO-OFDM and MC-CDMA. A further attraction of the joint treatment of these topics is that it allows the reader to view their design trade-offs in a comparative context. Divided into three main parts: Part I provides a detailed exposure of OFDM designed for employment in various applications Part II is another design alternative applicable in the context of OFDM systems where the channel quality fluctuations observed are averaged out with the aid of frequency-domain spreading codes, which leads to the concept of MC-CDMA Part III discusses how to employ multiple antennas at the base station for the sake of supporting multiple users in the uplink Portrays the entire body of knowledge currently available on OFDM Provides the first complete treatment of OFDM, MIMO(Multiple Input Multiple Output)-OFDM and MC-CDMA Considers the benefits of channel coding and space time coding in the context of various application examples and features numerous complete system design examples Converts the lessons of Shannon’s information theory into design principles applicable to practical wireless systems Combines the benefits of a textbook with a research monograph where the depth of discussions progressively increase throughout the book This all-encompassing self-contained treatment will appeal to researchers, postgraduate students and academics, practising research and development engineers working for wireless communications and computer networking companies and senior undergraduate students and technical managers.