This book presents a detailed description of the most common nondestructive testing(NDT) techniques used for the testing and evaluation fiber-reinforced composite structures, during manufacturing and/or in service stages. In order to facilitate the understanding and the utility of the different NDT techniques presented, the book first provides some information regarding the defects and material degradation mechanisms observed in fiber-reinforced composite structures as well as their general description and most probable causes. It is written based on the extensive scientific research and engineering backgrounds of the authors in the NDT and structural health monitoring (SHM) of structural systems from various areas including electrical, mechanical, materials, civil and biomedical engineering. Pursuing a rigorous approach, the book establishes a fundamental framework for the NDT of fiber-reinforced composite structures, while emphasizing on the importance of technique’s spatial resolution, integrated systems analysis and the significance of the influence stemming from the applicability of the NDT and the physical parameters of the test structures in the selection and utilization of adequate NDT techniques. The book is intended for students who are interested in the NDT of fiber-reinforced composite structures, researchers investigating the applicability of different NDT techniques to the inspections of structural systems, and NDT researchers and engineers working on the optimization of NDT systems for specific applications involving the use of fiber-reinforced composite structures.

The increased use of polymer matrix composites in structural applications has led to the growing need for a very high level of quality control and testing of products to ensure and monitor performance over time. Non-destructive evaluation (NDE) of polymer matrix composites explores a range of NDE techniques and the use of these techniques in a variety of application areas.Part one provides an overview of a range of NDE and NDT techniques including eddy current testing, shearography, ultrasonics, acoustic emission, and dielectrics. Part two highlights the use of NDE techniques for adhesively bonded applications. Part three focuses on NDE techniques for aerospace applications including the evaluation of aerospace composites for impact damage and flaw characterisation. Finally, the use of traditional and emerging NDE techniques in civil and marine applications is explored in part four.With its distinguished editor and international team of expert contributors, Non-destructive evaluation (NDE) of polymer matrix composites is a technical resource for researchers and engineers using polymer matrix composites, professionals requiring an understanding of non-destructive evaluation techniques, and academics interested in this field. - Explores a range of NDE and NDT techniques and considers future trends - Examines in detail NDE techniques for adhesively bonded applications - Discusses NDE techniques in aerospace applications including detecting impact damage, ultrasonic techniques and structural health monitoring

Today, fiber reinforced composites are in use • properties of different component (fiber, in a variety of structures, ranging from space matrix, filler) materials; craft and aircraft to buildings and bridges. • manufacturing techniques; This wide use of composites has been facili • analysis and design; tated by the introduction of new materials, • testing; improvements in manufacturing processes • mechanically fastened and bonded joints; and developments of new analytical and test • repair; ing methods. Unfortunately, information on • damage tolerance; these topics is scattered in journal articles, in • environmental effects; conference and symposium proceedings, in and disposal; • health, safety, reuse, workshop notes, and in government and com • applications in: pany reports. This proliferation of the source - aircraft and spacecraft; material, coupled with the fact that some of - land transportation; the relevant publications are hard to find or - marine environments; are restricted, makes it difficult to identify and - biotechnology; obtain the up-to-date knowledge needed to - construction and infrastructure; utilize composites to their full advantage. - sporting goods. This book intends to overcome these diffi Each chapter, written by a recognized expert, culties by presenting, in a single volume, is self-contained, and contains many of the many of the recent advances in the field of 'state-of-the-art' techniques reqUired for prac composite materials. The main focus of this tical applications of composites.

Infrared thermography (IRT) is a non-contact, non-invasive methodology which allows for detection of thermal energy that is radiated from objects in the infrared band of the electromagnetic spectrum, for conversion of such energy into a visible image (such as a surface temperature map). This feature represents a great potential to be exploited in a vast variety of fields from aerospace to civil engineering, to medicine, to agriculture, etc. However, IRT is still not adequately enclosed in industrial instrumentation and there are still potential users who might benefit from the use of such a technique and who are not aware of their existence. This e-book conveys information about basic IRT theory, infrared detectors, signal digitalization and applications of infrared thermography in many fields such as medicine, foodstuff conservation, fluid-dynamics, architecture, anthropology, condition monitoring, non destructive testing and evaluation of materials and structures. The volume promotes an exchange of information between the academic world and industry, and shares methodologies which were independently developed and applied in specific disciplines.

Composites Evaluation contains the proceedings of the Second International Conference on Testing, Evaluation and Quality Control of Composites-TEQC 87, held at the University of Surrey, UK on September 22-24, 1987. The papers review the physical and chemical properties of composites and the testing and evaluation of these materials. This monograph is comprised of 29 chapters split into nine sections, organized around the themes of nondestructive testing, fatigue testing, impact testing, processing-property relationships, acoustic emission, fracture, mechanical tests, and specialized test equipment and assessment of in-service behavior. The first chapter deals with the nondestructive testing of welds in continuous carbon fiber reinforced thermoplastics, while the second focuses on the use of an automated coin-tap technique for the nondestructive testing of composite structures. The chapters that follow explore hysteresis measurement for obtaining characteristic quantities during dynamic fatigue; real-time recording of impact experiments on composite laminates; the use of statistical methods for determining design data for advanced composite materials; and the strain dependence of elastic modulus in unidirectional composites. The final chapter describes a methodical approach for studying and predicting polymer fiber composite serviceability influenced by cold climate factors. This text will appeal to mechanical and structural engineers as well as materials scientists and technologists.

Electromagnetic Non-destructive Evaluation (ENDE) is an invaluable, non-invasive diagnostic tool for the inspection, testing, evaluation and characterization of materials and structures. It has now become indispensible in a number of diverse fields ranging from biomedics to many branches of industry and engineering. This book presents the proceedings of the 24th International Workshop on Electromagnetic Nondestructive Evaluation, held in Chengdu, China from 11 - 14 September 2019. The 38 peer-reviewed and extended contributions included here were selected from 45 original submissions, and are divided into 7 sections: eddy current testing and evaluation; advanced sensors; analytical and numerical modeling; material characterization; inverse problem and signal processing; artificial intelligence in ENDE; and industrial applications of ENDE. The papers cover recent studies concerning the progress and application of electromagnetic (EM) fields in the non-destructive examination of materials and structures, and topics covered include evaluations at a micro-structural level, such as correlating the magnetic properties of a material with its grain structure, and a macroscopic level, such as techniques and applications for EM NDT&E. Recent developments and emerging materials such as advanced EM sensors, multi-physics NDT&E, intelligent data management and maintaining the integrity of structures are also explored. The book provides a current overview of developments in ENDE, and will be of interest to all those working in the field.

Examines the initiation and growth of fatigue cracks and the fracture toughness of advanced materials such as silicon nitride, special alloys and steels, thermoplastics, and graphite-epoxy composites; and explains several non-destructive techniques to evaluate such materials for manufacturing defect

This study covers impact response, damage tolerance and failure of fibre-reinforced composite materials and structures. Materials development, analysis and prediction of structural behaviour and cost-effective design all have a bearing on the impact response of composites and this book brings together for the first time the most comprehensive and up-to-date research work from leading international experts. - State of the art analysis of impact response, damage tolerance and failure of FRC materials - Distinguished contributors provide expert analysis of the most recent materials and structures - Valuable tool for R&D engineers, materials scientists and designers