Surface engineering can be defined as an enabling technology used in a wide range of industrial activities. Surface engineering was founded by detecting surface features which destroy most of pieces, e.g. abrasion, corrosion, fatigue, and disruption; then it was recognized, more than ever, that most technological advancements are constrained with surface requirements. In a wide range of industry (such as gas and oil exploitation, mining, and manufacturing), the surfaces generate an important problem in technological advancement. Passing time shows us new interesting methods in surface engineering. These methods usually apply to enhance the surface properties, e.g. wear rate, fatigue, abrasion, and corrosion resistance. This book collects some of new methods in surface engineering.

Surface Engineering of Metals provides basic definitions of classical and modern surface treatments, addressing mechanisms of formation, microstructure, and properties of surface layers. Part I outlines the fundamentals of surface engineering, presents the history of its development, and proposes a two-category classification of surface layers. Discussions include the basic potential and usable properties of superficial layers and coatings, explaining their concept, interaction with other properties, and the significance of these properties for proper selection and functioning. Part II provides an original classification of the production methods of surface layers. Discussions include the latest technologies in this field, characterized by directional or beam interaction of particles or of the heating medium with the treat surface.

The only comprehensive, systematic comparison of major mechanical surface treatments, their effects, and the resulting material properties. The result is an up-to-date, full review of this topic, collating the knowledge hitherto spread throughout many original papers. The book begins with a description of elementary processes and mechanisms to give readers an easy introduction, before proceeding to offer systematic, detailed descriptions of the various techniques and three very important types of loading: thermal, quasistatic, and cyclic loading. It combines and correlates experimental and model aspects, while supplying in-depth explanations of the mechanisms and a very high amount of exemplary data.

Surface Treatment in Bonding Technology provides valuable advice on surface treatment methods, modern measuring devices, and the appropriate experimentation techniques that are essential to create strong joints with a reliable service life. The book's focus is on the detailed and up-to-date analysis of surface treatment methods for metallic and polymer substrates. An analysis of factors affecting the surface preparation stage, together with advice on selection, is also provided. Essential theory is combined with experimentation techniques and industry practice to provide a guide that is both practical and academically rigorous. Including a general introduction to bonding, as well as coverage of mechanical, chemical and electrochemical methods, this book is the ideal primer for anyone working with or researching adhesive bonding. - Provides detailed descriptions of surface treatments and their mechanisms that will help readers build a deep understanding of these fundamental techniques - Includes a thorough survey of recent advances in research in surface treatments of metals and polymers - Provides technical advice on experimental testing methods throughout the book

This highly illustrated reference work covers the three principal types of surface technologies that best protect engineering devices and products: diffusion technologies, deposition technologies, and other less commonly acknowledged surface engineering (SE) techniques. Various applications are noted throughout the text and additionally whole chapters are devoted to specific SE applications across the automotive, gas turbine engine (GTE), metal machining, and biomedical implant sectors. Along with the benefits of SE, this volume also critically examines SE's limitations. Materials degradation pathways - those which can and those which cannot be mitigated by SE - are rigorously explained. Written from a scientific, materials engineering perspective, this concise text is supported by high-quality images and photo-micrographs which show how surfaces can be engineered to overcome the limits of conventionally produced materials, even in complex or hostile operating environments. This book is a useful resource for undergraduate and postgraduate students as well as professional engineers.

This translation of a successful German title provides a broad and fundamental overview of current coating technology. Edited by experts from one of the largest research centers for this field in Germany, this valuable reference combines research and industrial perspectives, treated by authors from academia and industry alike. They discuss the potential of the many innovations introduced into industrial application in recent years, allowing materials scientists and engineers to find the appropriate solution for their own specific coating problems. Thus, with the aid of this book, it is possible to make coating technology an integral part of R&D, construction and production.

The hardest requirements on a material are in general imposed at the surface: it has to be wear resistant for tools and bearings; corrosion resistant for turbine blades; antireflecting for solar cells; and it must combine several of these properties in other applications. `Surface engineering' is the general term that incorporates all the techniques by which a surface modification can be accomplished. These techniques include both the more traditional methods, such as nitriding, boriding and carburizing, and the newer ones, such as ion implantation, laser beam melting and, in particular, coating. This book comprises and compares in a unique way all these techniques of surface engineering. It is a compilation of lectures which were held by renowned scientists and engineers in the frame of the well known `EuroCourses' of the Joint Research Centre of the Commission of the European Communities. The book is principally addressed to material and surface scientists, physicists and chemists, engineers and technicians of industries and institutes where surface engineering problems arise.

This book provides a comprehensive introduction to and technical description of a unique patented surface-modification technology: plasma surface metallurgy with double-glow discharge plasma process, known as the Xu-Tec process. As such it promotes further attention and interest in scientific research and engineering development in this area, as well as industrial utilization and product commercialization. The Xu-Tec process has opened up a new material engineering field of “Plasma Surface Metallurgy”. This surface-modification process can transform many low-grade and low-cost industrial engineering materials into “gold” materials with a high value and high grade or special functions. This improved material can be widely used in industrial production to improve the surface performance and quality of mechanical parts and manufacturing products, and to conserve expensive alloying elements for the benefit of all mankind. “This book will be valuable to those in the general area of surface metallurgy. The substantial description of the Xu-Tec process is very important and should assist in expanding the use of this superior technique. The in-depth explanation of glow discharges and their use in general will also serve as a valuable reference in the field.” James E. Thompson, Prof. Fellow of the IEEE Dean of Engineering Emeritus University of Missouri, Columbia, Missouri, USA November, 2016 "A BREAKTHROUGH IN MAKING METAL TOUGHER". ---- SCIENCE & TECHNOLOGY Business Week, July 24, 1989 “NOVEL SURFACE ALLOYING PROCESS” --- THE LEADING EDGE TECHNOLOGY WORDWIDE Materials and Processing Report, Dec. 1987

Modern Physical Metallurgy, Fourth Edition explains the fundamental principles of physical metallurgy and their application, allowing its readers to understand the many important technological phenomena of the field. The book covers topics such as the molecular properties of metals; the different physical methods of metals and alloys; and the structure of alloys. Also covered are topics such as the deformation of metals and alloys; phase transformations; and related processes such as creep, fatigue, fracture, oxidation, and corrosion. The text is recommended for metallurgists, chemists, and engineers who would like to know more about the principles behind metallurgy and its application in different fields.

As wear is a surface or near surface phenomenon it has long been realised that the wear resistance of a component can be improved by providing a surface of different composition from the bulk material. Although this book concentrates on surface coatings, the distinction between surface coatings and the process of modifying the surface by changing its composition is not always clear, so some useful surface modification techniques are also considered.Surface coatings for protection against wear, consists of twelve chapters written by different authors, experts in their field. After a brief introductory chapter wear phenomena and the properties required from a coating are addressed. Chapter three covers coating characterisation and property evaluation relevant to wear resistance with an emphasis on mechanical testing of coatings. The next chapter provides an introduction to the various methods available to deposit wear resistant coatings. The following six chapters describe in detail wear resistant coatings produced by various deposition routes. Emphasis is placed on the microstructure property relationship in these coatings. Chapter eleven addresses coatings and hardfacings, produced from welding processes, specifically modern developments such as friction surfacing and pulsed electrode surfacing techniques. The final chapter is dedicated to future trends in both coating materials and coating processes.Surface coatings for protection against wear is essential for anyone involved in selecting coatings and processes and will be an invaluable reference resource for all engineers and students concerned with the latest developments in coatings technology. - Essential for anyone involved in selecting coatings and processes, engineers and students - Written by an international team of experts in the field