Developments in Engineering Geology is a showcase of the diversity in the science and practice of engineering geology. All branches of geology are applicable to solving engineering problems and this presents a wide frontier of scientific opportunity to engineering geology. In practice, diversity represents a different set of challenges with the distinctive character of the profession derived from the crossover between the disciplines of geology and engineering. This book emphasizes the importance of understanding the geological science behind the engineering behaviour of a soil or rock. It also highlights a continuing expansion in the practice areas of engineering geology and illustrates how this is opening new frontiers to the profession thereby introducing new knowledge and technology across a range of applications. This is initiating an evolution in the way geology is modelled in engineering, geohazard and environmental studies in modern and traditional areas of engineering geology.

An Introduction to Applied and Environmental Geophysics, 2nd Edition, describes the rapidly developing field of near-surface geophysics. The book covers a range of applications including mineral, hydrocarbon and groundwater exploration, and emphasises the use of geophysics in civil engineering and in environmental investigations. Following on from the international popularity of the first edition, this new, revised, and much expanded edition contains additional case histories, and descriptions of geophysical techniques not previously included in such textbooks. The level of mathematics and physics is deliberately kept to a minimum but is described qualitatively within the text. Relevant mathematical expressions are separated into boxes to supplement the text. The book is profusely illustrated with many figures, photographs and line drawings, many never previously published. Key source literature is provided in an extensive reference section; a list of web addresses for key organisations is also given in an appendix as a valuable additional resource. Covers new techniques such as Magnetic Resonance Sounding, Controlled- Source EM, shear-wave seismic refraction, and airborne gravity and EM techniques Now includes radioactivity surveying and more discussions of down-hole geophysical methods; hydrographic and Sub-Bottom Profiling surveying; and UneXploded Ordnance detection Expanded to include more forensic, archaeological, glaciological, agricultural and bio-geophysical applications Includes more information on physio-chemical properties of geological, engineering and environmental materials Takes a fully global approach Companion website with additional resources available at www.wiley.com/go/reynolds/introduction2e Accessible core textbook for undergraduates as well as an ideal reference for industry professionals The second edition is ideal for students wanting a broad introduction to the subject and is also designed for practising civil and geotechnical engineers, geologists, archaeologists and environmental scientists who need an overview of modern geophysical methods relevant to their discipline. While the first edition was the first textbook to provide such a comprehensive coverage of environmental geophysics, the second edition is even more far ranging in terms of techniques, applications and case histories.

Every engineering structure, whether it's a building, bridge or road, is affected by the ground on which it is built. Geology is of fundamental importance when deciding on the location and design of all engineering works, and it is essential that engineers have a basic knowledge of the subject. Engineering Geology introduces the fundamentals of the discipline and ensures that engineers have a clear understanding of the processes at work, and how they will impact on what is to be built. Core areas such as stratigraphy, rock types, structures and geological processes are explained, and put in context. The basics of soil mechanics and the links between groundwater conditions and underlying geology are introduced. As well as the theoretical knowledge necessary, Professor Bell introduces the techniques that engineers will need to learn about and understand the geological conditions in which they intend to build. Site investigation techniques are detailed, and the risks and risk avoidance methods for dealing with different conditions are explained. - Accessible introduction to geology for engineers - Key points illustrated with diagrams and photographs - Teaches the impact of geology on the planning and design of structures

Winner of the 2004 Claire P. Holdredge Award of the Association of Engineering Geologists (USA). The only book to concentrate on the relationship between geology and its implications for construction, this book covers the full scope of the subject from site investigation through to the complexities of reservoirs and dam sites. Features include international case studies throughout, and summaries of accepted practice, plus sections on waste disposal, and contaminated land.

This text is directed at the heart of Engineering Geology where geology is used to identify potential problems arising from ground conditions. It describes how to investigate those conditions and to define an engineering response that will either avoid or reduce or even eliminate the problems revealed. The book presents the "big picture" that is so often lacking when only site details are available, but necessary for adequate engineering solutions.

'Engineering geology' is one of those terms that invite definition. The American Geological Institute, for example, has expanded the term to mean 'the application of the geological sciences to engineering practice for the purpose of assuring that the geological factors affecting the location, design, construction, operation and mainten ance of engineering works are recognized and adequately provided for'. It has also been defined by W. R. Judd in the McGraw-Hill Encyclopaedia of Science and Technology as 'the application of education and experience in geology and other geosciences to solve geological problems posed by civil engineering structures'. Judd goes on to specify those branches of the geological or geo-sciences as surface (or surficial) geology, structural/fabric geology, geohydro logy, geophysics, soil and rock mechanics. Soil mechanics is firmly included as a geological science in spite of the perhaps rather unfortunate trends over the years (now happily being reversed) towards purely mechanistic analyses which may well provide acceptable solutions for only the simplest geology. Many subjects evolve through their subject areas from an interdisciplinary background and it is just such instances that pose the greatest difficulties of definition. Since the form of educational development experienced by the practitioners of the subject ulti mately bears quite strongly upon the corporate concept of the term 'engineering geology', it is useful briefly to consider that educational background.

This advanced undergraduate textbook comprehensively describes principal geophysical surveying techniques for environmental and engineering problems.

The Engineering Group of the Geological Society Working Party brought together experts in glacial and periglacial geomorphology, Quaternary history, engineering geology and geotechnical engineering to establish best practice when working in former glaciated and periglaciated environments. The Working Party addressed outdated terminology and reviewed the latest academic research to provide an up-to-date understanding of glaciated and periglaciated terrains. This transformative, state-of-the-art volume is the outcome of five years of deliberation and synthesis by the Working Party. This is an essential reference text for practitioners, students and academics working in these challenging ground conditions. The narrative style, and a comprehensive glossary and photo-catalogue of active and relict sediments, structures and landforms make this material relevant and accessible to a wide readership.

Innovation in Near-Surface Geophysics: Instrumentation, Application, and Data Processing Methods offers an advanced look at state-of-the-art and innovative technologies for near surface geophysics, exposing the latest, most effective techniques in an accessible way. By addressing a variety of geophysical applications, including cultural heritage, civil engineering, characteristics of soil, and others, the book provides an understanding of the best products and methodologies modern near surface geophysics has to offer. It proposes tips for new ideas and projects, and encourages collaboration across disciplines and techniques for the best implementation and results.Clearly organized, with contributions from leaders from throughout geophysics, Innovation in Near-Surface Geophysics is an important guide for geophysicists who hope to gain a better understanding of the tools and techniques available. - Addresses a variety of applications in near-surface geophysics, including cultural heritage, civil engineering, soil analysis, etc. - Provides insight to available products and techniques and offers suggestions for future developments - Clearly organized by techniques and their applications