This thesis investigates the impact of: i) the low voltage ride-through and dynamic voltage support capability; ii) the active current recovery rate; iii) the local voltage control; and iv) the plant-level voltage control of large-scale photovoltaic systems on short-term voltage stability and fault-induced delayed voltage recovery as well as transient and frequency stability. The power system dynamic performance is analysed using state-of-the-art methods, such as phasor mode time-domain simulations and the calculation of the critical clearing time that determines the stability margin. Moreover, the recently developed Kullback-Leibler divergence measure is applied to assess the quality of the voltage recovery. Drawbacks of this metric are outlined and a novel metric, the so-called voltage recovery index, is defined that quantifies the delayed voltage recovery more systematically. The studies are performed with a generic photovoltaic system model and typical model parameters are used that were determined in collaboration with a manufacturer. The stability analysis is performed in DIgSILENT PowerFactory using: i) a one-load infinite-bus system; and ii) an IEEE multi-machine voltage stability test system, namely the Nordic test system. The results show that with the adequate control of photovoltaic systems, power system dynamic performance can be significantly improved.

For a one-semester senior or beginning graduate level course in power system dynamics. This text begins with the fundamental laws for basic devices and systems in a mathematical modeling context. It includes systematic derivations of standard synchronous machine models with their fundamental controls. These individual models are interconnected for system analysis and simulation. Singular perturbation is used to derive and explain reduced-order models.

An authoritative guide to the most up-to-date information on power system dynamics The revised third edition of Power System Dynamics and Stability contains a comprehensive, state-of-the-art review of information on the topic. The third edition continues the successful approach of the first and second editions by progressing from simplicity to complexity. It places the emphasis first on understanding the underlying physical principles before proceeding to more complex models and algorithms. The book is illustrated by a large number of diagrams and examples. The third edition of Power System Dynamics and Stability explores the influence of wind farms and virtual power plants, power plants inertia and control strategy on power system stability. The authors—noted experts on the topic—cover a range of new and expanded topics including: Wide-area monitoring and control systems. Improvement of power system stability by optimization of control systems parameters. Impact of renewable energy sources on power system dynamics. The role of power system stability in planning of power system operation and transmission network expansion. Real regulators of synchronous generators and field tests. Selectivity of power system protections at power swings in power system. Criteria for switching operations in transmission networks. Influence of automatic control of a tap changing step-up transformer on the power capability area of the generating unit. Mathematical models of power system components such as HVDC links, wind and photovoltaic power plants. Data of sample (benchmark) test systems. Power System Dynamics: Stability and Control, Third Edition is an essential resource for students of electrical engineering and for practicing engineers and researchers who need the most current information available on the topic.

Photovoltaic Power System: Modelling, Design and Control is an essential reference with a practical approach to photovoltaic (PV) power system analysis and control. It systematically guides readers through PV system design, modelling, simulation, maximum power point tracking and control techniques making this invaluable resource to students and professionals progressing from different levels in PV power engineering. The development of this book follows the author's 15-year experience as an electrical engineer in the PV engineering sector and as an educator in academia. It provides the background knowledge of PV power system but will also inform research direction. Key features: Details modern converter topologies and a step-by-step modelling approach to simulate and control a complete PV power system. Introduces industrial standards, regulations, and electric codes for safety practice and research direction. Covers new classification of PV power systems in terms of the level of maximum power point tracking. Contains practical examples in designing grid-tied and standalone PV power systems. Matlab codes and Simulink models featured on a Wiley hosted book companion website.

This book aims to provide insights on new trends in power systems operation and control and to present, in detail, analysis methods of the power system behavior (mainly its dynamics) as well as the mathematical models for the main components of power plants and the control systems implemented in dispatch centers. Particularly, evaluation methods for rotor angle stability and voltage stability as well as control mechanism of the frequency and voltage are described. Illustrative examples and graphical representations help readers across many disciplines acquire ample knowledge on the respective subjects.

A unique combination of theoretical knowledge and practical analysis experience Derived from Yoshihide Hases Handbook of Power Systems Engineering, 2nd Edition, this book provides readers with everything they need to know about power system dynamics. Presented in three parts, it covers power system theories, computation theories, and how prevailed engineering platforms can be utilized for various engineering works. It features many illustrations based on ETAP to help explain the knowledge within as much as possible. Recompiling all the chapters from the previous book, Power System Dynamics with Computer Based Modeling and Analysis offers nineteen new and improved content with updated information and all new topics, including two new chapters on circuit analysis which help engineers with non-electrical engineering backgrounds. Topics covered include: Essentials of Electromagnetism; Complex Number Notation (Symbolic Method) and Laplace-transform; Fault Analysis Based on Symmetrical Components; Synchronous Generators; Induction-motor; Transformer; Breaker; Arrester; Overhead-line; Power cable; Steady-State/Transient/Dynamic Stability; Control governor; AVR; Directional Distance Relay and R-X Diagram; Lightning and Switching Surge Phenomena; Insulation Coordination; Harmonics; Power Electronics Applications (Devices, PE-circuit and Control) and more. Combines computer modeling of power systems, including analysis techniques, from an engineering consultants perspective Uses practical analytical software to help teach how to obtain the relevant data, formulate what-if cases, and convert data analysis into meaningful information Includes mathematical details of power system analysis and power system dynamics Power System Dynamics with Computer-Based Modeling and Analysis will appeal to all power system engineers as well as engineering and electrical engineering students.

Simulation of Power System with Renewables provides details on the modelling and efficient implementation of MATLAB, particularly with a renewable energy driven power system. The book presents a step-by-step approach to modelling implementation, including all major components used in current power systems operation, giving the reader the opportunity to learn how to gather models for conventional generators, wind farms, solar plants and FACTS control devices. Users will find this to be a central resource for modelling, building and simulating renewable power systems, including discussions on its limitations, assumptions on the model, and the implementation and analysis of the system. - Presents worked examples and equations in each chapter that address system limitations and flexibility - Provides step-by-step guidance for building and simulating models with required data - Contains case studies on a number of devices, including FACTS, and renewable generation

The third edition of the landmark book on power system stability and control, revised and updated with new material The revised third edition of Power System Control and Stability continues to offer a comprehensive text on the fundamental principles and concepts of power system stability and control as well as new material on the latest developments in the field. The third edition offers a revised overview of power system stability and a section that explores the industry convention of q axis leading d axis in modeling of synchronous machines. In addition, the third edition focuses on simulations that utilize digital computers and commercial simulation tools, it offers an introduction to the concepts of the stability analysis of linear systems together with a detailed formulation of the system state matrix. The authors also include a revised chapter that explores both implicit and explicit integration methods for transient stability. Power System Control and Stability offers an in-depth review of essential topics and: Discusses topics of contemporary and future relevance in terms of modeling, analysis and control Maintains the approach, style, and analytical rigor of the two original editions Addresses both power system planning and operational issues in power system control and stability Includes updated information and new chapters on modeling and simulation of round-rotor synchronous machine model, excitation control, renewable energy resources such as wind turbine generators and solar photovoltaics, load modeling, transient voltage instability, modeling and representation of three widely used FACTS devices in the bulk transmission network, and the modeling and representation of appropriate protection functions in transient stability studies Contains a set of challenging problems at the end of each chapter Written for graduate students in electric power and professional power system engineers, Power System Control and Stability offers an invaluable reference to basic principles and incorporates the most recent techniques and methods into projects.

Im ersten Teil dieser Arbeit wird ein Algorithmus vorgestellt, der spannungsabhängige Einspeisung von Wirk- und Blindleistung in den Lastfluss-Algorithmus integriert. Es wird eine Beschleunigung von bis zu einer Größenordnung gegenüber dem derzeit gängigen Verfahren, und eine verbesserte Robustheit erreicht. Im zweiten Teil wird ein Phasor-Framework zur dynamischen Simulation von Stromnetzen vorgestellt. Die wesentliche Neuheit ist die Möglichkeit der Integration von Zustandsdiagrammen direkt in die Komponentenmodelle. Damit wird eine wesentlich schnellere Modellentwicklung ermöglicht als mit verfügbaren Tools. Im dritten Teil werden Modelle entwickelt und in das Framework integriert. Der Schwerpunkt liegt auf einem Photovoltaik-Modell welches das dynamische P(V), Q(V) und P(f) Verhalten nach VDE 4105 im Bereich Sekunden bis Minuten abbildet. Im vierten Teil wird das entwickelte Phasor-Framework verwendet, um das Wiederzuschaltverhalten von Photovoltaikanlagen in einem dieselbetriebenen Inselnetz in der Niederspannung zu untersuchen. Die Untersuchung zeigt, dass ein periodisches Ab- und Abschalten von Photovoltaikanlagen vorkommen kann.

This book provides an overview of power electronic converters for numerical simulations based on DIgSILENT PowerFactory. It covers the working principles, key assumptions and implementation of models of different types of these power systems. The book is divided into three main parts: the first discusses high-voltage direct currents, while the second part examines distribution systems and micro-grids. Lastly, the third addresses the equipment and technologies used in modelling and simulation. Each chapter includes practical examples and exercises, and the accompanying software illustrates essential models, principles and performance using DIgSILENT PowerFactory. Exploring various current topics in the field of modelling power systems, this book will appeal to a variety of readers, ranging from students to practitioners.