Improve your circuit-design potential with this expert guide to the devices and technology used in mixed analog-digital VLSI chips for such high-volume applications as hard-disk drives, wireless telephones, and consumer electronics. The book provides you with a critical understanding of device models, fabrication technology, and layout as they apply to mixed analog-digital circuits.You will learn about the many device-modeling requirements for analog work, as well as the pitfalls in models used today for computer simulators such as Spice. Also included is information on fabrication technologies developed specifically for mixed-signal VLSI chips, plus guidance on the layout of mixed analog-digital chips for a high degree of analog-device matching and minimum digital-to-analog interference.This reference book features an intuitive introduction to MOSFET operation that will enable you to view with insight any MOSFET model ? besides thorough discussions on valuable large-signal and small-signal models.Filled with practical information, this first-of-its-kind book will help you grasp the nuances of mixed-signal VLSI-device models and layout that are crucial to the design of high-performance chips.

Improve your circuit-design potential with this expert guide to the devices and technology used in mixed analog-digital VLSI chips for such high-volume applications as hard-disk drives, wireless telephones, and consumer electronics. The book provides you with a critical understanding of device models, fabrication technology, and layout as they apply to mixed analog-digital circuits.You will learn about the many device-modeling requirements for analog work, as well as the pitfalls in models used today for computer simulators such as Spice. Also included is information on fabrication technologies developed specifically for mixed-signal VLSI chips, plus guidance on the layout of mixed analog-digital chips for a high degree of analog-device matching and minimum digital-to-analog interference.This reference book features an intuitive introduction to MOSFET operation that will enable you to view with insight any MOSFET model — besides thorough discussions on valuable large-signal and small-signal models.Filled with practical information, this first-of-its-kind book will help you grasp the nuances of mixed-signal VLSI-device models and layout that are crucial to the design of high-performance chips.

Covering the essentials of analog circuit design, this book takes a unique design approach based on a MOSFET model valid for all operating regions, rather than the standard square-law model. Opening chapters focus on device modeling, integrated circuit technology, and layout, whilst later chapters go on to cover noise and mismatch, and analysis and design of the basic building blocks of analog circuits, such as current mirrors, voltage references, voltage amplifiers, and operational amplifiers. An introduction to continuous-time filters is also provided, as are the basic principles of sampled-data circuits, especially switched-capacitor circuits. The final chapter then reviews MOSFET models and describes techniques to extract design parameters. With numerous design examples and exercises also included, this is ideal for students taking analog CMOS design courses and also for circuit designers who need to shorten the design cycle.

When first published in 1996, this text by David Johns and Kenneth Martin quickly became a leading textbook for the advanced course on Analog IC Design. This new edition has been thoroughly revised and updated by Tony Chan Carusone, a University of Toronto colleague of Drs. Johns and Martin. Dr. Chan Carusone is a specialist in analog and digital IC design in communications and signal processing. This edition features extensive new material on CMOS IC device modeling, processing and layout. Coverage has been added on several types of circuits that have increased in importance in the past decade, such as generalized integer-N phase locked loops and their phase noise analysis, voltage regulators, and 1.5b-per-stage pipelined A/D converters. Two new chapters have been added to make the book more accessible to beginners in the field: frequency response of analog ICs; and basic theory of feedback amplifiers.

An introduction to the design of analog VLSI circuits. Neuromorphic engineers work to improve the performance of artificial systems through the development of chips and systems that process information collectively using primarily analog circuits. This book presents the central concepts required for the creative and successful design of analog VLSI circuits. The discussion is weighted toward novel circuits that emulate natural signal processing. Unlike most circuits in commercial or industrial applications, these circuits operate mainly in the subthreshold or weak inversion region. Moreover, their functionality is not limited to linear operations, but also encompasses many interesting nonlinear operations similar to those occurring in natural systems. Topics include device physics, linear and nonlinear circuit forms, translinear circuits, photodetectors, floating-gate devices, noise analysis, and process technology.

This volume of Analog Circuit Design concentrates on three topics: Volt Electronics; Design and Implementation of Mixed-Mode Systems; Low-Noise and RF Power Amplifiers for Telecommunication. The book comprises six papers on each topic written by internationally recognised experts. These papers are tutorial in nature and together make a substantial contribution to improving the design of analog circuits. The book is divided into three parts: Part I, Volt Electronics, presents some of the circuit design challenges which are having to be met as the need for more electronics on a chip forces smaller transistor dimensions, and thus lower breakdown voltages. The papers cover techniques for 1-Volt electronics. Part II, Design and Implementation of Mixed-Mode Systems, deals with the various problems that are encountered in mixed analog-digital design. In the future, all integrated circuits are bound to contain both digital and analog sub-blocks. Problems such as substrate bounce and other substrate coupling effects cause deterioration in signal integrity. Both aspects of mixed-signal design have been addressed in this section and it illustrates that careful layout techniques embedded in a hierarchical design methodology can allow us to cope with most of the challenges presented by mixed analog-digital design. Part III, Low-noise and RF Power Amplifiers for Telecommunication, focuses on telecommunications systems. In these systems low-noise amplifiers are front-ends of receiver designs. At the transmitter part a high-performance, high-efficiency power amplifier is a critical design. Examples of both system parts are described in this section. Analog Circuit Design is an essential reference source for analog design engineers and researchers wishing to keep abreast with the latest developments in the field. The tutorial nature of the contributions also makes it suitable for use in an advanced course.

When I attended college we studied vacuum tubes in our junior year. At that time an average radio had ?ve vacuum tubes and better ones even seven. Then transistors appeared in 1960s. A good radio was judged to be one with more thententransistors. Latergoodradioshad15–20transistors and after that everyone stopped counting transistors. Today modern processors runing personal computers have over 10milliontransistorsandmoremillionswillbeaddedevery year. The difference between 20 and 20M is in complexity, methodology and business models. Designs with 20 tr- sistors are easily generated by design engineers without any tools, whilst designs with 20M transistors can not be done by humans in reasonable time without the help of Prof. Dr. Gajski demonstrates the Y-chart automation. This difference in complexity introduced a paradigm shift which required sophisticated methods and tools, and introduced design automation into design practice. By the decomposition of the design process into many tasks and abstraction levels the methodology of designing chips or systems has also evolved. Similarly, the business model has changed from vertical integration, in which one company did all the tasks from product speci?cation to manufacturing, to globally distributed, client server production in which most of the design and manufacturing tasks are outsourced.

As their name implies, VLSI systems involve the integration of various component systems. While all of these components systems are rooted in semiconductor manufacturing, they involve a broad range of technologies. This volume of the Principles and Applications of Engineering series examines the technologies associated with VLSI systems, including

This book describes new, fuzzy logic-based mathematical apparatus, which enable readers to work with continuous variables, while implementing whole circuit simulations with speed, similar to gate-level simulators and accuracy, similar to circuit-level simulators. The author demonstrates newly developed principles of digital integrated circuit simulation and optimization that take into consideration various external and internal destabilizing factors, influencing the operation of digital ICs. The discussion includes factors including radiation, ambient temperature, electromagnetic fields, and climatic conditions, as well as non-ideality of interconnects and power rails.