Measurement in Fluid Mechanics is an introductory, general reference in experimental fluid mechanics, featuring classical and state-of-the-art methods for flow visualization, flow rate measurement, pressure, velocity, temperature, concentration and wall shear stress. Suitable as a textbook for graduate and advanced undergraduate courses, and for practising engineers and applied scientists.

This revised edition provides updated fluid mechanics measurement techniques as well as a comprehensive review of flow properties required for research, development, and application. Fluid-mechanics measurements in wind tunnel studies, aeroacoustics, and turbulent mixing layers, the theory of fluid mechanics, the application of the laws of fluid mechanics to measurement techniques, techniques of thermal anemometry, laser velocimetry, volume flow measurement techniques, and fluid mechanics measurement in non-Newtonian fluids, and various other techniques are discussed.

There is a tendency to make flow measurement a highly theoretical and technical subject but what most influences quality measurement is the practical application of meters, metering principles, and metering equipment and the use of quality equipment that can continue to function through the years with proper maintenance have the most influence in obtaining quality measurement. This guide provides a review of basic laws and principles, an overview of physical characteristics and behavior of gases and liquids, and a look at the dynamics of flow. The authors examine applications of specific meters, readout and related devices, and proving systems. Practical guidelines for the meter in use, condition of the fluid, details of the entire metering system, installation and operation, and the timing and quality of maintenance are also included. This book is dedicated to condensing and sharing the authors' extensive experience in solving flow measurement problems with design engineers, operating personnel (from top supervisors to the newest testers), academically-based engineers, engineers of the manufacturers of flow meter equipment, worldwide practitioners, theorists, and people just getting into the business. - The authors' many years of experience are brought to bear in a thorough review of fluid flow measurement methods and applications - Avoids theory and focuses on presentation of practical data for the novice and veteran engineer - Useful for a wide range of engineers and technicians (as well as students) in a wide range of industries and applications

Mechanical engineers involved with flow mechanics have long needed an authoritative reference that delves into all the essentials required for experimentation in fluids, a resource that can provide fundamental review, as well as the details necessary for experimentation on everything from household appliances to hi-tech rockets. Instrumentation, Measurements, and Experiments in Fluids meets this challenge, as its author is not only a highly respected pioneer in fluids, but also possesses twenty years experience teaching students of all levels. He clearly explains fundamental principles as well the tools and methods essential for advanced experimentation. Reflecting an awe for flow mechanics, along with a deep-rooted knowledge, the author has assembled a fourteen chapter volume that is destined to become a seminal work in the field. Providing ample detail for self study and the sort of elegant writing rarely found in so thorough a treatment, he provides insight into all the vital topics and issues associated with the devices and instruments used for fluid mechanics and gas dynamics experiments. Extremely organized, this work presents easy access to the principles behind the science and goes on to elucidate the current research and findings needed by those seeking to make further advancement. Unique and Thorough Coverage of Uncertainty Analysis The author provides valuable insight into the vital issues associated with the devices used in fluid mechanics and gas dynamics experiments. Leaving nothing to doubt, he tackles the most difficult concepts and ends the book with an introduction to uncertainty analysis. Structured and detailed enough for self study, this volume also provides the backbone for both undergraduate and graduate courses on fluids experimentation.

One cannot overemphasize the importance of studying fluids in motion or at rest for a variety of scientific and engineering endeavors. Fluid mechanics as an art reaches back into antiquity, but its rational formulation is a relatively recent undertaking. Much of the physics of a particular flow situation can be understood by conducting appropriate experiments. Flow visualization techniques offer a useful tool to establish an overall picture of a flow field and to delineate broadly its salient features before embarking on more detailed quantitative measurements. Among the single-point measurements that are particularly difficult are those in separated flows, non-Newtonian fluids, rotating flows, and nuclear aerosols. Pressure, shear stress, vorticity, and heat transfer coefficient are also difficult quantities to measure, particularly for time-dependent flows. These and other special situations are among the topics covered in this volume. Each article emphasizes the development of a particular measuring technique. The topics covered were chosen because of their importance to the field, recent appeal, and potential for future development. The articles are comprehensive and coverage is pedagogical with a bias towards recent developments.

Flow meters measure the volumetric flow rate in a pipeline. Most meters are based on deriving a signal from the fluid flow and calibrating the signal against the volumetric flow rate. The calibration is done in fully-developed flow, and the same state of flow must exist at the meter’s position when it is in practical use. Because the field of flow metering has been neglected by fluid mechanicists for a long time, this book addresses two major fluid mechanical problems in flow metering: the analysis of signal generation in turbulent pipe flow, which explains the function of the meter beyond a simple calibration, and the possible use of a meter in non-developed flows. These problems are investigated with reference to, and examples from, a variety of meters, e.g. ultrasound cross-correlation meters, vortex meters, and turbine meters. Studying these problems requires consideration of specific phenomena in turbulent non-developed pipe flow, as caused by installations, and finding special solutions with signal processing, both of which are included in the book.

Study faster, learn better, and get top grades! Here is the ideal review for your fluid mechanics and hydraulics course More than 40 million students have trusted Schaum’s Outlines for their expert knowledge and helpful solved problems. Written by a renowned expert in this field, Schaum's Outline of Fluid Mechanics and Hydraulics covers what you need to know for your course and, more important, your exams. Step-by-step, the author walks you through coming up with solutions to exercises in this topic. Features: 622 fully solved problems Links to online instruction videos Practical examples of proofs of theorems and derivations of formulas Chapters on fluid statics and the flow of compressible fluids Detailed explanations of free-body analysis, vector diagrams, the principles of work and energy and impulse-momentum, and Newton’s laws of motion Helpful material for the following courses: Introduction to Fluid Dynamics; Introduction to Hydraulics; Fluid Mechanics; Statics and Mechanics of Materials

An Introduction to Turbulence and Its Measurement is an introductory text on turbulence and its measurement. It combines the physics of turbulence with measurement techniques and covers topics ranging from measurable quantities and their physical significance to the analysis of fluctuating signals, temperature and concentration measurements, and the hot-wire anemometer. Examples of turbulent flows are presented. This book is comprised of eight chapters and begins with an overview of the physics of turbulence, paying particular attention to Newton's second law of motion, the Newtonian viscous fluid, and equations of motion. After a chapter devoted to measurable quantities, the discussion turns to some examples of turbulent flows, including turbulence behind a grid of bars, Couette flow, atmospheric and oceanic turbulence, and heat and mass transfer. The next chapter describes measurement techniques using hot wires, films, and thermistors, as well as Doppler-shift anemometers; glow-discharge or corona-discharge anemometers; pulsed-wire anemometer; and steady-flow techniques for fluctuation measurement. This monograph is intended for post-graduate students of aeronautics and fluid mechanics, but should also be readily understandable to those with a good general background in engineering fluid dynamics.

Plant Flow Measurement and Control Handbook is a comprehensive reference source for practicing engineers in the field of instrumentation and controls. It covers many practical topics, such as installation, maintenance and potential issues, giving an overview of available techniques, along with recommendations for application. In addition, it covers available flow sensors, such as automation and control. The author brings his 35 years of experience in working in instrumentation and control within the industry to this title with a focus on fluid flow measurement, its importance in plant design and the appropriate control of processes. The book provides a good balance between practical issues and theory and is fully supported with industry case studies and a high level of illustrations to assist learning. It is unique in its coverage of multiphase flow, solid flow, process connection to the plant, flow computation and control. Readers will not only further understand design, but they will also further comprehend integration tactics that can be applied to the plant through a step-by-step design process that goes from installation to operation. - Provides specification sheets, engineering drawings, calibration procedures and installation practices for each type of measurement - Presents the correct flow meter that is suitable for a particular application - Includes a selection table and step-by-step guide to help users make the best decision - Cover examples and applications from engineering practice that will aid in understanding and application

Accompanying DVD-ROM contains ... "all chapters of the Springer Handbook."--Page 3 of cover.