Install and configure a pfSense router/firewall, and become a pfSense expert in the process. Key Features You can always do more to secure your software – so extend and customize your pfSense firewall Build a high availability security system that’s fault-tolerant – and capable of blocking potential threats Put the principles of better security into practice by implementing examples provided in the text Book Description pfSense has the same reliability and stability as even the most popular commercial firewall offerings on the market – but, like the very best open-source software, it doesn’t limit you. You’re in control – you can exploit and customize pfSense around your security needs. Mastering pfSense - Second Edition, covers features that have long been part of pfSense such as captive portal, VLANs, traffic shaping, VPNs, load balancing, Common Address Redundancy Protocol (CARP), multi-WAN, and routing. It also covers features that have been added with the release of 2.4, such as support for ZFS partitions and OpenVPN 2.4. This book takes into account the fact that, in order to support increased cryptographic loads, pfSense version 2.5 will require a CPU that supports AES-NI. The second edition of this book places more of an emphasis on the practical side of utilizing pfSense than the previous edition, and, as a result, more examples are provided which show in step-by-step fashion how to implement many features. What you will learn Configure pfSense services such as DHCP, Dynamic DNS, captive portal, DNS, NTP and SNMP Set up a managed switch to work with VLANs Use pfSense to allow, block and deny traffic, and to implement Network Address Translation (NAT) Make use of the traffic shaper to lower and raise the priority of certain types of traffic Set up and connect to a VPN tunnel with pfSense Incorporate redundancy and high availability by utilizing load balancing and the Common Address Redundancy Protocol (CARP) Explore diagnostic tools in pfSense to solve network problems Who this book is for This book is for those with at least an intermediate understanding of networking. Prior knowledge of pfSense would be helpful but is not required. Those who have the resources to set up a pfSense firewall, either in a real or virtual environment, will especially benefit, as they will be able to follow along with the examples in the book.

Install, Configure and Setup different connections with pfSense Key Features Build firewall and routing solutions with PfSense. Learn how to create captive portals, how to connect Pfsense to your https environment and so on. Practical approach towards building firewall solutions for your organization Book Description As computer networks become ubiquitous, it has become increasingly important to both secure and optimize our networks. pfSense, an open-source router/firewall, provides an easy, cost-effective way of achieving this – and this book explains how to install and configure pfSense in such a way that even a networking beginner can successfully deploy and use pfSense. This book begins by covering networking fundamentals, deployment scenarios, and hardware sizing guidelines, as well as how to install pfSense. The book then covers configuration of basic services such as DHCP, DNS, and captive portal and VLAN configuration. Careful consideration is given to the core firewall functionality of pfSense, and how to set up firewall rules and traffic shaping. Finally, the book covers the basics of VPNs, multi-WAN setups, routing and bridging, and how to perform diagnostics and troubleshooting on a network. What you will learn Install pfSense Configure additional interfaces, and enable and configure DHCP Understand Captive portal Understand firewalls and NAT, and traffic shaping Learn in detail about VPNs Understand Multi-WAN Learn about routing and bridging in detail Understand the basics of diagnostics and troubleshooting networks Who this book is for This book is towards any network security professionals who want to get introduced to the world of firewalls and network configurations using Pfsense. No knowledge of PfSense is required

Written by pfSense co-founder Chris Buechler and pfSense consultant Jim Pingle, this definitive guide to pfSense covers installation and basic configuration through advanced networking and firewalling with the popular open source firewall and router distribution. This book is designed to be a friendly step-by-step guide to common networking and security tasks, plus a thorough reference of pfSense's capabilities. --from publisher description

Master Wicket by example by implementing real-life solutions to every day tasks.

A practical, example-driven guide to configuring even the most advanced features of pfSense 2.x Key FeaturesBuild a high-availability fault-tolerant security system with pfSense 2.xLeverage the latest version of pfSense to secure your cloud environmentA recipe-based guide that will help you enhance your on-premise and cloud security principlesBook Description pfSense is an open source distribution of the FreeBSD-based firewall that provides a platform for flexible and powerful routing and firewalling. The versatility of pfSense presents us with a wide array of configuration options, which makes determining requirements a little more difficult and a lot more important compared to other offerings. pfSense 2.x Cookbook – Second Edition starts by providing you with an understanding of how to complete the basic steps needed to render a pfSense firewall operational. It starts by showing you how to set up different forms of NAT entries and firewall rules and use aliases and scheduling in firewall rules. Moving on, you will learn how to implement a captive portal set up in different ways (no authentication, user manager authentication, and RADIUS authentication), as well as NTP and SNMP configuration. You will then learn how to set up a VPN tunnel with pfSense. The book then focuses on setting up traffic shaping with pfSense, using either the built-in traffic shaping wizard, custom floating rules, or Snort. Toward the end, you will set up multiple WAN interfaces, load balancing and failover groups, and a CARP failover group. You will also learn how to bridge interfaces, add static routing entries, and use dynamic routing protocols via third-party packages. What you will learnConfigure the essential pfSense services (namely, DHCP, DNS, and DDNS)Create aliases, firewall rules, NAT port-forward rules, and rule schedulesCreate multiple WAN interfaces in load-balanced or failover configurationsConfigure firewall redundancy with a CARP firewall failoverConfigure backup/restoration and automatic configuration-file backupConfigure some services and perform diagnostics with command-line utilitiesWho this book is for This book is intended for all levels of network administrators. If you are an advanced user of pfSense, then you can flip to a particular recipe and quickly accomplish the task at hand; if you are new to pfSense, on the other hand, you can work through the book chapter by chapter and learn all of the features of the system from the ground up.

Use an open source firewall and features such as failover, load balancer, OpenVPN, IPSec, and Squid to protect your network Key Features Explore pfSense, a trusted open source network security solution Configure pfSense as a firewall and create and manage firewall rules Test pfSense for failover and load balancing across multiple WAN connections Book Description While connected to the internet, you’re a potential target for an array of cyber threats, such as hackers, keyloggers, and Trojans that attack through unpatched security holes. A firewall works as a barrier (or ‘shield’) between your computer and cyberspace. pfSense is highly versatile firewall software. With thousands of enterprises using pfSense, it is fast becoming the world's most trusted open source network security solution. Network Security with pfSense begins with an introduction to pfSense, where you will gain an understanding of what pfSense is, its key features, and advantages. Next, you will learn how to configure pfSense as a firewall and create and manage firewall rules. As you make your way through the chapters, you will test pfSense for failover and load balancing across multiple wide area network (WAN) connections. You will then configure pfSense with OpenVPN for secure remote connectivity and implement IPsec VPN tunnels with pfSense. In the concluding chapters, you’ll understand how to configure and integrate pfSense as a Squid proxy server. By the end of this book, you will be able to leverage the power of pfSense to build a secure network. What you will learn Understand what pfSense is, its key features, and advantages Configure pfSense as a firewall Set up pfSense for failover and load balancing Connect clients through an OpenVPN client Configure an IPsec VPN tunnel with pfSense Integrate the Squid proxy into pfSense Who this book is for Network Security with pfSense is for IT administrators, security administrators, technical architects, chief experience officers, and individuals who own a home or small office network and want to secure it.

pfSense Essentials is a detailed reference to the pfSense Internet gateway, a featureful software suite for VPN, captive portal, and shared network management. The book covers the installation and basic configuration through advanced networking and firewalling.

Master building and integrating secure private networks using OpenVPN About This Book Discover how to configure and set up a secure OpenVPN Enhance user experience by using multiple authentication methods Delve into better reporting, monitoring, logging, and control with OpenVPN Who This Book Is For If you are familiar with TCP/IP networking and general system administration, then this book is ideal for you. Some knowledge and understanding of core elements and applications related to Virtual Private Networking is assumed. What You Will Learn Identify different VPN protocols (IPSec, PPTP, OpenVPN) Build your own PKI and manage certificates Deploy your VPN on various devices like PCs, mobile phones, tablets, and more Differentiate between the routed and bridged network Enhance your VPN with monitoring and logging Authenticate against third-party databases like LDAP or the Unix password file Troubleshoot an OpenVPN setup that is not performing correctly In Detail Security on the internet is increasingly vital to both businesses and individuals. Encrypting network traffic using Virtual Private Networks is one method to enhance security. The internet, corporate, and “free internet” networks grow more hostile every day. OpenVPN, the most widely used open source VPN package, allows you to create a secure network across these systems, keeping your private data secure. The main advantage of using OpenVPN is its portability, which allows it to be embedded into several systems. This book is an advanced guide that will help you build secure Virtual Private Networks using OpenVPN. You will begin your journey with an exploration of OpenVPN, while discussing its modes of operation, its clients, its secret keys, and their format types. You will explore PKI: its setting up and working, PAM authentication, and MTU troubleshooting. Next, client-server mode is discussed, the most commonly used deployment model, and you will learn about the two modes of operation using "tun" and "tap" devices. The book then progresses to more advanced concepts, such as deployment scenarios in tun devices which will include integration with back-end authentication, and securing your OpenVPN server using iptables, scripting, plugins, and using OpenVPN on mobile devices and networks. Finally, you will discover the strengths and weaknesses of the current OpenVPN implementation, understand the future directions of OpenVPN, and delve into the troubleshooting techniques for OpenVPN. By the end of the book, you will be able to build secure private networks across the internet and hostile networks with confidence. Style and approach An easy-to-follow yet comprehensive guide to building secure Virtual Private Networks using OpenVPN. A progressively complex VPN design is developed with the help of examples. More advanced topics are covered in each chapter, with subjects grouped according to their complexity, as well as their utility.

This fully revised and updated second edition provides a unique, in-depth look at the major business challenges and threats that are introduced when an organization's network is connected to the public Internet. It provides a comprehensive explanation of network security basics, including how hackers access online networks and the use of Firewalls and VPNs to provide security countermeasures. Using examples and exercises, this book incorporates hands-on activities to prepare the reader to disarm threats and prepare for emerging technologies and future attacks. Topics covered include: the basics of network security--exploring the details of firewall security and how VPNs operate; how to plan proper network security to combat hackers and outside threats; firewall configuration and deployment and managing firewall security; and how to secure local and internet communications with a VP. --