Guidelines for Mine Waste Dump and Stockpile Design is a comprehensive, practical guide to the investigation, design, operation and monitoring of mine waste dumps, dragline spoils and major stockpiles associated with large open pit mines. These facilities are some of the largest man-made structures on Earth, and while most have performed very well, there are cases where instabilities have occurred with severe consequences, including loss of life and extensive environmental and economic damage. Developed and written by industry experts with extensive knowledge and experience, this book is an initiative of the Large Open Pit (LOP) Project. It comprises 16 chapters that follow the life cycle of a mine waste dump, dragline spoil or stockpile from site selection to closure and reclamation. It describes the investigation and design process, introduces a comprehensive stability rating and hazard classification system, provides guidance on acceptability criteria, and sets out the key elements of stability and runout analysis. Chapters on site and material characterisation, surface water and groundwater characterisation and management, risk assessment, operations and monitoring, management of ARD, emerging technologies and closure are included. A chapter is also dedicated to the analysis and design of dragline spoils. Guidelines for Mine Waste Dump and Stockpile Design summarises the current state of practice and provides insight and guidance to mine operators, geotechnical engineers, mining engineers, hydrogeologists, geologists and other individuals that are responsible at the mine site level for ensuring the stability and performance of these structures. Readership includes mining engineers, geotechnical engineers, civil engineers, engineering geologists, hydrogeologists, environmental scientists, and other professionals involved in the site selection, investigation, design, permitting, construction, operation, monitoring, closure and reclamation of mine waste dumps and stockpiles.

This Mining Environment Management Manual is developed for the benefit of the entire mining industry in the Country. The Manual has been designed in such a manner that it can be easily used by the engineers and environmentalists in the mining complexes in their efforts for the management of mining environment. The Manual presents the existing status and comprehensive overview of all the aspects of mining environment. Since environment is a developing subject the user of the Manual is suggested to, wherever necessary, consult the web-sites of MOEF and other concerned organizations for the latest status. The manual in nineteen chapters outlines the following for the benefit of the users. 1. Broad details of the mineral mining industry in the country. 2. Policies, legislation, standards and procedures for establishing and operating the mines covering an environmental overview of the national policies and the policies of the mining companies, mining and environmental legislations and standards, site selection, environmental clearance, forestry clearance, and the various formats to be filled or establishing and operating the mines. 3. Preparation of the environmental management plans (EMPs) of the mining projects. 4. Environmental monitoring. 5. Mining methods commonly used in the Indian coal and non-coal mineral industry. 6. Environmental impacts of mining on society, ecology, land, water regime and atmosphere. 7. Environmental impact assessment (EIA). 8. Environmental management measures required in mineral mining including the assessment of quality of life, development of R&R packages, development of surface and underground water bodies, replantation of trees, formation and management of soil and overburden dumps, environmental aspects of blasting, land reclamation and rehabilitation planning, mine fires, acid mine drainage, inundation, noise modeling, etc. 9. Mine closure comprising of legislative and social necessity of mine closure in the Indian context, mine closure planning for underground and opencast mines, and format for mine closure planning in project report. 10. Procedure for environmental performance auditing and evaluation. 11. Land acquisition and optimization of land requirement for mining and associated activities, and rehabilitation and resettlement. 12. Land use planning in mining areas. 13. Risk assessment and disaster management. 14. Environmental aspects of tailing storage. 15. Use of geographical information system in environmental management in mining areas. 16. Utilization of fly ash in mines. 17. Environmental economics. 18. Roles of executives in environmental management in mining areas. 19. Do's and don'ts in environmental management planning and implementation. The manual in simple English aims at to attract attention of one and all concerned with the management of mining environment. The manual will be useful to the following categories of the people in the mining complexes in the Country and Abroad. · Mine planners in planning and designing of the mining activities and integration of environmental management measures in the mining methods. · Mine operators in implementing the environmental management measures, monitoring and compliance of legislation. · Regulatory agencies and their executives in developing a better understanding of the mining environment related aspects and implementing the legislation. · Research workers in planning, designing, and undertaking research and development activities. · Educationists in imparting the knowledge and know-how to the participants in various academic and human resource development programs. · The Non-Governmental Organizations (NGOs) in developing a better understanding of the mining environment and assisting the mineral industry in effective implementation of the environmental management efforts. · The people in the mining complexes in developing the understanding of various aspects of the management of mining environment. In addition the Manual will be an important addition to the knowledge base in the libraries of all the institutions and organizations associated with mining and environmental management. The user is advised to read the Manual carefully and understand the various topics discussed and then use their own wisdom and the suggestions made in the Manual in design, planning, implementation and monitoring of the mining activities. The legislative aspect of mining environmental management is dynamic and time to time changes are made in the Acts. Rules and Regulations by the Central and State Governments. The user is therefore advised to get abreast with the latest developments through the web-sites of the MOEF and the Central and State Pollution Control Boards and other regulatory agencies, e.g., DGMS, IBM, etc.

Tailings and Mine Waste 10 contains the contributions from the 14th annual Tailings and Mine Waste Conference, held by Colorado State University of Fort Collins, Colorado in conjunction with the University of Alberta and the University of British Columbia. The purpose of this series of conferences is to provide a forum for discussion and establish

Presents papers on mine and mill tailings and mine waste, as well as current and future issues facing the mining and environmental communities. Subjects related to technical capabilities and developments, regulations and environmental concerns are included.

Presenting a survey of embankment dams, this book provides information from many countries on research, environmental considerations, risks, hazards, and safety. It is useful for engineers involved in the planning, design, construction, or operation of water-retaining embankments, and tailing dams.

This book offers the guidelines on long-term confinement of fine particulate waste products in a safe and environmentally acceptable location. It seeks to present the state of the art, drawing on combined experience from within the European Union (EU), on good international practice where relevant and on lessons learnt from recent untoward incidents. These guidelines have been developed in parallel with the development of the European Standard on Earthworks (prEN 16907) and the contents have been influenced by the well-publicised need for guidance to all stakeholders on both technical and regulatory aspects of the permitting, design and construction of extractive waste facilities in Europe. The Extractive Waste Directive (EWD) imposes a duty on all operators and regulators to ensure the competent design, operation and closure of such facilities. However, though some guidance has been published on a limited number of related technical elements, the relevance of these contributions has been diminished by the lack of an integrated approach. It is now evident to both regulatory bodies and operators alike that a unified and comprehensive document providing guidance to all stakeholders is required if the future of mining within the EU is to be assured and further untoward incidents avoided. These guidelines seek to address all technical stages of the development of a hydraulic fill project in the context of the EWD, with an emphasis on waste and facility characterisation and on the risk-based assessments which underwrite them. They are intended for use by all stakeholders involved in those European industries which involve the generation, transport and storage of fine particulate waste products requiring long-term confinement in a safe, stable and environmentally acceptable location.

Tailings are the residue of the milling process for extracting metals for ore. They are mostly commonly dumped in surface impoundments (tailing dams), the embankments of which are usually earthfilled dams. In spite of a number of guidelines to their design and construction there are still major failings each year. This book gathers together 221 case records of incidents in attempt to investigate the causes of failure. The main causes were found to be lack of control of water balance, lack of control of construction, lack of understanding of the feature that control safe operation

Geotechnical Engineering of Dams provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams. In addition, much attention is paid to the review and assessment of existing dams. The main emphasis of this work is on embankment dams, but much of the text, particularly t

This book contains the papers presented at two conferences organized by the Wessex Institute of Technology. The first conference is the Seventh International Conference on Computer Simulation in Risk Analysis and Hazard Mitigation, being held in Algarve, Portugal, September 13-15. This biennial conference is the latest in a successful series that began in 1998 and that includes many practical applications, demonstrating how to analyze and manage risk and mitigate hazards. The applications cover man-made as well as natural hazards, the importance of which is becoming increasingly evident in our modern world. These problems have become a priority for all governments, as well as a cause for public concern. The second conference is the Fifth International Conference on Prevention, Assessment, Rehabilitation and Development of Brownfield Sites, also being held in Algarve, September 14-16. The biennial conference was first held in 2002 and covers the challenges the public and private sectors must face in seeking to reuse brownfield sites and to capitalize on the opportunities.