Industrial Tomography: Systems and Applications, Second Edition thoroughly explores the important techniques of industrial tomography, also discusses image reconstruction, systems, and applications. This book presents complex processes, including the way three-dimensional imaging is used to create multiple cross-sections, and how computer software helps monitor flows, filtering, mixing, drying processes, and chemical reactions inside vessels and pipelines. This book is suitable for materials scientists and engineers and applied physicists working in the photonics and optoelectronics industry or in the applications industries. - Provides a comprehensive discussion on the different formats of tomography, including advances in visualization and data fusion - Includes an excellent overview of image reconstruction using a wide range of applications - Presents a comprehensive discussion of tomography systems and their applications in a wide variety of industrial processes

X-ray computed tomography has been used for several decades as a tool for measuring the three-dimensional geometry of the internal organs in medicine. However, in recent years, we have seen a move in manufacturing industries for the use of X-ray computed tomography; first to give qualitative information about the internal geometry and defects in a component, and more recently, as a fully-quantitative technique for dimensional and materials analysis. This trend is primarily due to the ability of X-ray computed tomography to give a high-density and multi-scale representation of both the external and internal geometry of a component, in a non-destructive, non-contact and relatively fast way. But, due to the complexity of X-ray computed tomography, there are remaining metrological issues to solve and the specification standards are still under development. This book will act as a one-stop-shop resource for students and users of X-ray computed tomography in both academia and industry. It presents the fundamental principles of the technique, detailed descriptions of the various components (hardware and software), current developments in calibration and performance verification and a wealth of example applications. The book will also highlight where there is still work to do, in the perspective that X-ray computed tomography will be an essential part of Industry 4.0.

Industrial process tomography (IPT) is becoming an important tool for Industry 4.0. It consists of multidimensional sensor technologies and methods that aim to provide unparalleled internal information on industrial processes used in many sectors. This book showcases a selection of papers at the forefront of the latest developments in such technologies.

In order to fully utilise nucleonic measurement principles and their applications, it is important to have an understanding of the underlying physics. Radioisotope Gauges for Industrial Process Measurements combines theoretical background with practical experience in order to present an accessible overview of the use of radioisotopes in industry. This unique book explains the modes of operation of installed gauges and presents nucleonic methods relevant to measurement problems. The first part of the book deals with radiation sources, the interaction of radiation with matter and radiation detectors. The second part explains the different measurement principles used for industrial gauges and the last part of the book covers industrial applications. This book also: Features a concise introduction to atomic and nuclear physics. Presents a range of nucleonic measurement methods and highlights their application to a variety of problems. Contains an overview of electronics, measurement accuracy, safety and standards. Considers processes and demands, design strategies and practical realisation of measurement systems. Provides many practical engineering examples. Offering a comprehensive coverage of engineering applications, this book is an essential tool for electrical, electronic and instrument engineers in the oil and chemicals processing sectors. It is also a valuable reference to graduate students and physicists involved in nuclear radiation measurement, medical applications, radiochemical research, environmental monitoring and chemical engineering.

Written by international experts in this field, the book describes the principles of, and presents case studies for, the wide range of tomographic imaging techniques that can be used in the process industries. It includes sufficient introductory materialto this multi-disciplinary subject in order that readers from a variety of backgrounds will be able to fully understand the fundamental principles and features of the sensors and image reconstruction techniques needed for process tomography.

In the United States there are several thousand devices containing high-activity radiation sources licensed for use in areas ranging from medical uses such as cancer therapy to safety uses such as testing of structures and industrial equipment. Those radiation sources are licensed by the U.S. Nuclear Regulatory Commission and state agencies. Concerns have been raised about the safety and security of the radiation sources, particularly amid fears that they could be used to create dirty bombs, or radiological dispersal device (RDD). In response to a request from Congress, the U.S. Nuclear Regulatory Commission asked the National Research Council to conduct a study to review the uses of high-risk radiation sources and the feasibility of replacing them with lower risk alternatives. The study concludes that the U.S. government should consider factors such as potential economic consequences of misuse of the radiation sources into its assessments of risk. Although the committee found that replacements of most sources are possible, it is not economically feasible in some cases. The committee recommends that the U.S. government take steps to in the near term to replace radioactive cesium chloride radiation sources, a potential "dirty bomb" ingredient used in some medical and research equipment, with lower-risk alternatives. The committee further recommends that longer term efforts be undertaken to replace other sources. The book presents a number of options for making those replacements.

The decay product of the medical isotope molybdenum-99 (Mo-99), technetium-99m (Tc-99m), and associated medical isotopes iodine-131 (I-131) and xenon-133 (Xe-133) are used worldwide for medical diagnostic imaging or therapy. The United States consumes about half of the world's supply of Mo-99, but there has been no domestic (i.e., U.S.-based) production of this isotope since the late 1980s. The United States imports Mo-99 for domestic use from Australia, Canada, Europe, and South Africa. Mo-99 and Tc-99m cannot be stockpiled for use because of their short half-lives. Consequently, they must be routinely produced and delivered to medical imaging centers. Almost all Mo-99 for medical use is produced by irradiating highly enriched uranium (HEU) targets in research reactors, several of which are over 50 years old and are approaching the end of their operating lives. Unanticipated and extended shutdowns of some of these old reactors have resulted in severe Mo-99 supply shortages in the United States and other countries. Some of these shortages have disrupted the delivery of medical care. Molybdenum-99 for Medical Imaging examines the production and utilization of Mo-99 and associated medical isotopes, and provides recommendations for medical use.

Non-destructive testing (NDT) is a pertinent task in nearly every field of human activity, from the assuring of aircraft integrity to the evaluation of infrastructural decay caused by deterioration or damage. The development of non-destructive methods for quality management results in economic and environmental benefits, in an increase in product reliability, and in improved public safety and security. This book contains over fifty reviewed and edited papers on the innovative developments and new applications in NDT. It covers cutting-edge NDT methods, including optical, acoustic, ultrasonic, and electromagnetic techniques, tomography, radiography, and thermography. Intended for a researchers and practitioners involved with studying, testing and maintaining machinery, products and components in laboratory and industrial environments.

As industrial processes and their corresponding control models increase in complexity, the data provided by traditional point sensors is no longer adequate to ensure product quality and cost-effective operation. Process Imaging for Automatic Control demonstrates how in-process imaging technologies surpass the limitations of traditional monitoring systems by providing real-time multidimensional measurement and control data. Combined with suitable data extraction and control schemes, such systems can optimize the performance of a wide variety of industrial processes. Contributed by leading international experts, Process Imaging for Automatic Control offers authoritative, comprehensive coverage of this new area of process control technology, including: Basic goals of process modeling and their application to automatic control Direct imaging devices and applications, such as machine vision and spatial measurement of flow velocity, pressure, shear, pH, and temperature Various techniques, hardware implementations, and image reconstruction methods for process tomography Image enhancement and restoration State estimation methods State space control system models, control strategies, and implementation issues Five chapters devoted to case studies and advanced applications From theory to practical implementation, this book is the first to treat the entire range of imaging techniques and their application to process control. Supplying broad coverage with more than 270 illustrations and nearly 700 cited references, it presents an accessible introduction to this rapidly growing, interdisciplinary technology.