This Guideline presents the framework of process safety knowledge and expertise versus the desired competency level in a "super-matrix" format, vertically and diagonally. The matrix references for potential remedies/required training may be tailored to a company's internally developed training, reference externally available training, or some combination of the two. Chapters include: Identify Process Safety Roles & Competency Needs; Process Safety Competency Matrix; Individual and Corporate Process Safety Competencies; Conduct Assessments vs. Needs; Develop Gap Closure Plans; and Sustaining Competencies.

Guidelines for Risk Based Process Safety provides guidelines for industries that manufacture, consume, or handle chemicals, by focusing on new ways to design, correct, or improve process safety management practices. This new framework for thinking about process safety builds upon the original process safety management ideas published in the early 1990s, integrates industry lessons learned over the intervening years, utilizes applicable "total quality" principles (i.e., plan, do, check, act), and organizes it in a way that will be useful to all organizations - even those with relatively lower hazard activities - throughout the life-cycle of a company.

There is much industry guidance on implementing engineering projects and a similar amount of guidance on Process Safety Management (PSM). However, there is a gap in transferring the key deliverables from the engineering group to the operations group, where PSM is implemented. This book provides the engineering and process safety deliverables for each project phase along with the impacts to the project budget, timeline and the safety and operability of the delivered equipment.

Process Safety for Engineers Familiarizes an engineer new to process safety with the concept of process safety management In this significantly revised second edition of Process Safety for Engineers: An Introduction, CCPS delivers a comprehensive book showing how Process Safety concepts are used to reduce operational risks. Students, new engineers, and others new to process safety will benefit from this book. In this updated edition, each chapter begins with a detailed incident case study, provides steps that help address issues, and contains problem sets which can be assigned to students. The second edition covers: Process Safety: including an overview of CCPS’ Risk Based Process Safety Hazards: specifically fire and explosion, reactive chemical, and toxicity Design considerations for hazard control: including Hazard Identification and Risk Analysis Management of operational risk: including management of change In addition, the book presents how Process Safety performance is monitored and sustained. The associated online resources are linked to the latest online CCPS resources and lectures.

Human Factors Handbook for Process Plant Operations Provides clear and simple instructions for integrating Human Factors principles and practices in the design of processes and work tasks Human Factors, the science of interaction between humans and other elements of a system, draws from disciplines such as psychology, ergonomics, anthropometrics, and physiology to understand how and why people behave and perform as they do—and how best to support them in performing tasks. The goals of the Human Factors approach are to improve human reliability, minimize the risk from human error, and optimize the working environment, human wellbeing, and overall system performance. Human Factors Handbook for Process Plant Operations guides supervisors, managers, and engineers on incorporating Human Factors principles and practices into plant maintenance and operations. With thorough and accessible coverage of all Human Factors topics of relevance to process industries, this easy-to-use handbook uses real-world anecdotes and case studies to demonstrate effective training and learning, task planning, communications, emergency response, risk and error management, and more. Throughout the text, the authors offer valuable insights into why people make mistakes while providing advice on how to help workers perform their process operational tasks successfully. Explains all essential Human Factors concepts and knowledge with clear descriptions and illustrative examples Offers actionable advice and models of good practice that can be applied to design, process operations, start-ups and shut-downs, and maintenance Addresses job aids, equipment design, competence, task support, non-technical skills, working with contractors, and managing change Discusses how lack of Human Factors considerations during the engineering design phase can adversely affect safety and performance Describes how to use indicators to both recognize and learn from human error and performance issues Written by highly experienced operating and maintenance personnel, Human Factors Handbook for Process Plant Operations is an indispensable resource for everyone involved with defining, planning, training, and managing process operations, maintenance, and emergency response in the food, pharmaceutical, chemical, petroleum, and refining industries. The missions of both the CCPS and EI include developing and disseminating knowledge, skills and good practices to protect people, the environment, and property by bringing the best knowledge and practices to industry, academia, governments and the public around the world through collective wisdom, tools, training and expertise. The CCPS, an industrial technology alliance of the American Institute of Chemical Engineers (AIChE), has been at the forefront of documenting and sharing important process safety risk assessment methodologies for more than 35 years and has published over 100 books in its process safety guidelines and process safety concept book series. The EI’s Technical Work Program addresses the depth and breadth of the energy sector from fuels and fuels distribution to health and safety, sustainability and the environment. The EI program provides cost-effective, value-adding knowledge on key current and future international issues affecting those in the energy sector.

This book discusses the fundamental skills, techniques, and tools of auditing, and the characteristics of a good process safety management system. A variety of approaches are given so the reader can select the best methodology for a given audit. This book updates the original CCPS Auditing Guideline project since the implementation of OSHA PSM regulation, and is accompanied by an online download featuring checklists for both the audit program and the audit itself. This package offers a vital resource for process safety and process development personnel, as well as related professionals like insurers.

The definitive leadership guide on safe practices The release of chemicals and other hazardous materials pose significant, potentially catastrophic threats worldwide. An alarming number of such events, all of which are preventable, occur too often. Reducing the frequency of serious incidents is a fundamental responsibility of leadership at all levels, from frontline managers and supervisors to C-suite executives and the board of directors as well. Process Safety Leadership from the Boardroom to the Frontline is a practical, authoritative guide that clearly demonstrates how to create a viable culture of safety within an organization, implement and maintain disciplined management systems, and address the risks of process safety deficiencies. The most important factor in any management system is leadership. For chemical process safety management, effective and informed leadership provides direction, reinforces commitment, and drives responsibility. Written by experts from the Center for Chemical Process Safety, the world's largest provider of engineering curriculum materials for process safety, this pragmatic book contains the critical information and guidelines required to lead and manage process safety. Detailed yet accessible chapters examine topics such as strengthening management system accountability, driving operation within constraints, ensuring corporate memory, verifying execution, and more. Designed to be frequently used, shared, and discussed by leadership teams throughout an organization, this indispensable resource: Demonstrates the many ways process safety benefits an organization, based on benchmarking and broad industrial experience Develops skills and expands knowledge needed to drive consistent, reliable process safety performance Describes essential behaviors and actions for leaders to drive excellence in process safety cultures and disciplined management systems Helps establish risk criteria and safeguards for companies Presents new and previously unpublished experiences, approaches, and thinking Written for executives, plant leaders, functional managers, frontline supervisors and also individual contributors, Process Safety Leadership from the Boardroom to the Frontline provides a much-needed guide for instituting safe practices within a company. The Center for Chemical Process Safety (CCPS) has been the world leader in developing and disseminating information on process safety management and technology since 1985. The CCPS, an industry technology alliance of the American Institute of Chemical Engineers (AIChE), has published over 100 books in its process safety guidelines and process safety concepts series, and over 10 training modules through its Safety in Chemical Engineering Education (SAChE) series.

An essential guide for recognizing and responding to normalization of deviance to help organizations improve their process safety performance This book provides an introduction and offers approaches for finding and addressing normalization of deviation both in operational and organizational activities. It addresses the initial and long-term effects of normalization of deviations as seen in reduced efficiencies, reduced product quality, extended batch run time, and near miss process safety incidents which can lead to loss of containment of hazardous materials and energies. Recognizing and Responding to Normalization of Deviance addresses how to recognize and respond to the normalization of deviation that can, and almost certainly will, occur in any ongoing operations that involves humans. The book’s primary focus is on reducing the incidence of normalization of deviation and the associated increased risk exposure due to its effects when operating chemical or petrochemical manufacturing facilities. It contains an introduction to the concept and offers approaches for finding and addressing normalization of deviation when it presents itself in both operational and organizational activities. Contains guidance to assist facilities in recognizing and addressing the phenomenon of normalization of deviation Provides techniques for addressing normalized deviations and techniques to eliminate waste in all manufacturing processes Describes methods for identifying normalized deviation as well as where to find deviations Includes techniques to reduce operational normalization of deviance and to reduce organizational normalization of deviance Aimed at process safety professionals and consultants applying process safety risk reduction efforts in manufacturing areas, Recognizing and Responding to Normalization of Deviance is an important book for any organization that has seen its process safety performance deteriorate over time.

This book presents a guidance on a large range of decision aids for risk analysts and decision makers in industry so that vital decisions can be made in a more consistent, logical, and rigorous manner. It provide good industry practices on how risk decision making is conducted in the chemical industry from many risk information sources as well as all the elements that need to be addressed to ensure good decisions are being made. Topics Include: Identifying Risk Decisions, A Risk Decision Strategy for Process Safety, Case Studies in Risk Decision Making Failures, Guidance on Selecting Decision Aids, Templates for Decision Making in Risk-Based Process Safety, Understanding Process Hazards & Worst Possible Consequences, Management of Change as an Exercise in Risk Identification, Inherently Safer Design as an Exercise in Risk Tradeoff Analysis, Using LOPA and Risk Matrices in Risk Decisions, Using CPQRA and Safety Risk Criteria in Risk Decisions, Group Decision Making, Avoiding Decision Traps, Documentation of Process Safety Risk Decisions

Familiarizes the student or an engineer new to process safety with the concept of process safety management Serves as a comprehensive reference for Process Safety topics for student chemical engineers and newly graduate engineers Acts as a reference material for either a stand-alone process safety course or as supplemental materials for existing curricula Includes the evaluation of SACHE courses for application of process safety principles throughout the standard Ch.E. curricula in addition to, or as an alternative to, adding a new specific process safety course Gives examples of process safety in design