This edited book is a comprehensive collection of chapters on various clean energy technology such as solar energy, waste biomass as energy, hydro-electricity generation, biodiesel production from biomass and strategies to cater the demand of clean renewable energy. Clean energy technologies also enhance economic growth by increasing the supply of energy demand and tackling environmental challenges and their impacts due to the use of other conventional sources of energy. The conventional/non-conventional energy production methods are efficient but it has adverse effects on environment and human health. As environmental concerns are not avoidable therefore the necessity of clean energy production comes in to the picture. The clean energy can be produced by different wastes which are caused for the environmental pollution. This book covers various aspects of new and renewable clean energy production technology and its utilization in different fields. This is a useful reading material for students and researchers involved in clean energy study.

Sustainable Manufacturing examines the overall sustainability of a wide range of manufacturing processes and industrial systems. With chapters addressing machining, casting, additive and gear manufacturing processes; and hot topics such as remanufacturing, life cycle engineering, and recycling, this book is the most complete guide to this topic available. Drawing on experts in both academia and industry, coverage addresses theoretical developments and practical improvements from research and innovations. This unique book will advise readers on how to achieve sustainable manufacturing processes and systems, and further the clean and safe environment. This handbook is a part of the four volume set entitled Handbooks in Advanced Manufacturing. The other three address Advanced Machining and Finishing, Advanced Welding and Deforming, and Additive Manufacturing. - Provides basic to advanced level information on various aspects of sustainable manufacturing - Presents the strategies and techniques to achieve sustainability in numerous areas of manufacturing and industrial engineering such as environmentally benign machining, sustainable additive manufacturing, remanufacturing and recycling, sustainable supply chain, and life cycle engineering - Combines contributions from experts in academia and industry with the latest research and case studies - Explains how to attain a clean, green, and safe environment via sustainable manufacturing - Presents recent developments and suggests future research directions

Green Productivity and Cleaner Production: A Guidebook for Sustainability focuses on green production processes that could help better achieve global sustainability. It aids readers in realizing the issues with current conventional productivity initiatives and examines the newest methods. Also, it presents numerous real-world applications techniques, which allows users the ability to apply the most appropriate solutions for their situations. Further, it explains measures to achieve green productivity and cleaner production to help maintain high quality, sustainable production chains while simultaneously conserving natural resources and reducing waste. Features: Examines the core theories and techniques for green productivity, waste management, end-of-pipe treatment methods, sustainable production technologies, and cleaner production Written with a simple and easily understandable presentation, applicable for both undergraduate students and practicing professionals alike Provides guidance on how to use different tools and techniques in various problem-solving scenarios Focuses on greening production processes as an initiation to achieve global environmental sustainability Includes numerous illustrations, along with practical examples and tools helpful for readers to understand and apply the approaches presented throughout The subjects covered in Green Productivity and Cleaner Production: A Guidebook for Sustainability are of interest to students, researchers, academicians, and professionals in various industries.

This book focuses on environmental sustainability by employing elements of engineering and green computing through modern educational concepts and solutions. It visualizes the potential of artificial intelligence, enhanced by business activities and strategies for rapid implementation, in manufacturing and green technology. This book covers utilization of renewable resources and implementation of the latest energy-generation technologies. It discusses how to save natural resources from depletion and illustrates facilitation of green technology in industry through usage of advanced materials. The book also covers environmental sustainability and current trends in manufacturing. The book provides the basic concepts of green technology, along with the technology aspects, for researchers, faculty, and students.

This book will review the current status of the agriculture and agri-food sector in regard to green processing and provide strategies that can be used by the sector to enhance the use of environmentally-friendly technologies for production, processing. The book will look at the full spectrum from farm to fork beginning with chapters on life cycle analysis and environmental impact assessment of different agri-food sectors. This will be followed by reviews of current and novel on-farm practices that are more environmentally-friendly, technologies for food processing that reduce chemical and energy use and emissions as well as novel analytical techniques for R&D and QA which reduce solvent, chemical and energy consumption. Technologies for waste treatment, "reducing, reusing, recycling", and better water and energy stewardship will be reviewed. In addition, the last section of the book will attempt to look at technologies and processes that reduce the generation of process-induced toxins (e.g., trans fats, acrylamide, D-amino acids) and will address consumer perceptions about current and emerging technologies available to tackle these processing and environmental issues.

Green Manufacturing: Fundamentals and Applications introduces the basic definitions and issues surrounding green manufacturing at the process,machine and system (including supply chain) levels. It also shows, by way of several examples from different industry sectors, the potential for substantial improvement and the paths to achieve the improvement. Additionally, this book discusses regulatory and government motivations for green manufacturing and outlines the path for making manufacturing more green as well as making production more sustainable. This book also: Discusses new engineering approaches for manufacturing and provides a path from traditional manufacturing to green manufacturing Addresses regulatory and economic issues surrounding green manufacturing Details new supply chains that need to be in place before going green Includes state-of-the-art case studies in the areas of automotive, semiconductor and medical areas as well as in the supply chain and packaging areas

This textbook integrates green design and manufacturing within the framework of sustainability, emphasizing cost, recyclables, and reuse. This book includes the analytical techniques for cost minimization, reduction of material waste, and the reduction of energy consumption during the manufacturing process. All aspects of green design, economics, feasible material selection, and relevant and efficient manufacturing processes are presented. Techniques including life cycle cost assessment, reuse, and recyclables are showcased with examples and problems solved.

This book provides an overview on current sustainable machining. Its chapters cover the concept in economic, social and environmental dimensions. It provides the reader with proper ways to handle several pollutants produced during the machining process. The book is useful on both undergraduate and postgraduate levels and it is of interest to all those working with manufacturing and machining technology.

​ Green Business Process Management – Towards the Sustainable Enterprise" consolidates the global state-of-the-art knowledge about how business processes can be managed and improved in light of sustainability objectives. Business organizations, a dominant part of our society, have always been a major contributor to the degradation of our natural environment, through the resource consumption, greenhouse emissions, and wastage production associated with their business processes. In order to lessen their impact on the natural environment, organizations must design and implement environmentally sustainable business processes. Finding solutions to this organizational design problem is the key challenge of Green Business Process Management. This book- discusses the emerging challenges of designing “green” business processes,- presents tools and methods that organizations can use in order to design and implement environmentally sustainable processes, and- provides insights from cases where organizations successfully engaged in more sustainable business practices. The book is of relevance to both practitioners and academics who are interested in understanding, designing, and implementing “green” business processes. It also constitutes a valuable resource for students and lecturers in the fields of information systems, management, and sustainable development. Preface by Richard T. Watson