This book presents a comprehensive overview of research on environmentally friendly insulating gases, in response to the urgent calls for developing alternatives to SF6 due to the increasing awareness of the threat it poses as a greenhouse gas. It covers gas dielectrics, SF6 and its mixtures, and potential alternative gases, providing fundamental information on gas discharge and gas insulation and especially focusing on the development of new environmentally friendly insulating gases over the last decade. The book begins by describing the insulating and arcing characteristics of SF6, followed by an introduction to the gas dielectrics performance of SF6 gas mixtures with buffer gases. The latest findings on new environmentally friendly insulating gases are described in detail, and suggestions for practical application are also provided. Graduate students and teachers involved in high-voltage and insulation engineering can use the book as teaching material. Researchers working in plasma science, laser action and related applied physics fields can also benefit from the book’s analytical approach and detailed data; engineers from the fields of electric power operation systems and electrical manufacturing will find it a valuable reference work for solving practical problems.

The book contains a broad and in depth review by leading world experts of the progress and the problems of current interest in gaseous dielectrics and their use, especially as insulators in high-voltage equipment and substations. Recent advances in superconductivity for power transmission and in plasma technology are also included. The fundamental, applied and industrial research described in the book allows the electric power industry to transmit and distribute electrical energy in more efficient, safe and environmentally acceptable ways.

The increase in demand for electricity and the growing energy density in metropolitan cities have made it necessary to extend the existing high voltage network right up to the consumer. Stepping down the voltage from transmission to the distribution level at the substations located near the actual consumers not only yields economic advantages, but also ensures reliable power supply. Such substations are required to meet a number of severe requirements, including small installation size, effective protection against atmospheric pollution and moisture, noiseless operation, nonexplosive and flame resistant, reduced maintenance, minimal radio interference while providing excellent electric characteristics. Conventional substations using atmospheric air as the main dielectric cannot satisfy these requirements, but totally enclosed substations using sulphur hexafluoride (SF6) gas insulation that are also known as Gas Insulated Substations (GIS). GIS is now in widespread use in the electrical power industry, especially in metropolitan areas. This book will serve as a valuable reference for the novice as well as the expert who needs a wider and detailed scope of coverage within the area of GIS. Gas Insulated Substations provides a comprehensive coverage of a wide range of topics which include: " Introduction to GIS & Properties of SF6 " Layout, Design, Construction, Testing & Maintenance of GIS " Special Problems and Diagnostic Techniques " VFTO Phenomena and its Effects in GIS " Service Experience " Standards Specifications " Future Trends " Extensive References Gas Insulated Substations (GIS) is the first single source for authoritative information on the state of the art in GIS.

Gas-insulated transmission lines (GIL) is an established high voltage technology used when environmental or structural considerations restrict the use of overhead transmission lines. With an overview on the technical, economical and environmental impact and power system implications of GIL, this guide provides a complete understanding of its physical design, features and advantages. The author illustrates how to evaluate when GIL would be the best solution during the planning sequence and how to apply GIL in the electricity power network. Other key features include: operation and maintenance requirements with information on repair processes, duration, and different monitoring systems enabling the achievement of reliable and safe operation; a wide variety of realized applications from across the world over the past 35 years, illustrating typical fields of application through descriptions of real projects that the author has worked on; and future application possibilities in a smart transmission network, used for solving power transmission problems. This is an essential reference for engineers involved in planning and executing bulk power transmission projects overground, in tunnels or buried. It offers a concise summary of all areas of the subject and is the perfect aid for utility power engineers, consulting engineers and manufacturers worldwide.

This book offers an insight into the insulation failures in GIS/GIL and provides practical guidance for improving the insulation reliability of epoxy-based spacers. High voltage gas-insulated apparatuses, including gas-insulated switchgears (GIS) and transmission lines (GIL), playing an important role in the global power transmission system. Epoxy-based spacers are key components in GIS/GIL, playing the role of electrical insulation and mechanical support. However, insulation failures frequently occur around the epoxy-based spacers, threatening the safe operation of the electric power system. Three topics make up this book, with seven to nine chapters in each topic. In the first topic, the surface charging and discharging behaviors of epoxy-based spacers are discussed to deepen the readers’ understanding on the insulation problems in GIS/GIL. And the insulation breakdown of epoxy-based spacers is found to be closely related to the electric field distortion under complex operating conditions. In the second topic, original researches on the surface functionally graded materials (SFGM) are presented for relaxing the electric field distortion around the epoxy-based spacers in both AC and DC GIS/GIL, and a series of optimization methods and fabrication techniques for the SFGM spacers are introduced and discussed. In the last topic, the nonlinear conductivity materials (NCM), also known as self-adaptive materials or intelligent materials, are applied as coatings to adaptively regulate the electric field distributions along the surfaces of the epoxy-based spacers. Besides, the concept of the multi-dimensional functionally graded materials (MFGM) is proposed to uniform the electric field distributions in DC GIS/GIL under stationary and transient voltages, exhibiting great potential in the future application.

Gaseous Dielectrics V presents the proceedings of the Fifth International Symposium on Gaseous Dielectrics, held in Knoxville, Tennessee on May 3–7, 1987. This book discusses the effective coupling between basic and applied research and technology achieved in this area. Organized into 12 chapters, this book begins with an overview of the status of theoretical calculations of excitation and ionization coefficients for electrons. This text then provides an extensive investigation into different phases of discharge development in electronegative gases. Other chapters consider the use of sulfur hexafluoride as a dielectric medium in rail systems and gas circuit breakers. This book reviews as well the primary requirements for a successful gas analysis program, with emphasis on measurement and interpretation methods. The final chapter deals with the progress in dielectric quality assurance of gas insulated substations (GIS), which has resulted from improved scientific knowledge of significant phenomena. This book is a valuable resource for electrical and electronics engineers.

Gaseous Dielectrics IX covers recent advances and developments in a wide range of basic, applied, and industrial areas of gaseous dielectrics.

PARTIAL DISCHARGES (PD) — DETECTION, IDENTIFICATION AND LOCALIZATION Explore state-of-the-art partial discharge measurement techniques In Partial Discharges (PD) — Detection, Identification and Localization, a team of distinguished electrical engineers delivers a comprehensive treatment of the behavior, modeling, measurement, monitoring, localization, and evaluation of partial discharges. It includes coverage of all major advancements in the field that have occurred over the last few decades. It also discusses partial discharge phenomena, detection methods, and strategies for analyzing and processing collected data. Mechanisms of insulation failure are explored, as is the denoising of partial discharge measurement data and the localization of partial discharge in large, high-voltage equipment. Non-electric principles and procedures are discussed, and the book offers a variety of tables, figures, and photographs to illustrate the concepts discussed within. Partial Discharges(PD) also provides: A thorough introduction to the physical behavior of partial discharges, including their causes and classification Comprehensive modeling of partial discharge behavior, including classical and dipole discharges Practical discussions of the measurement of partial discharges, including the electrical method, partial discharge decoupling, and pre- and post-processing of partial discharges In-depth examinations of the monitoring of partial discharge behavior, including methods and realization Perfect for electrical engineers engaged in electrical power engineering, Partial Discharges (PD) will also earn a place in the libraries of research and development specialists employed in the manufacturing, quality testing and operation of electrical systems.

Inspired by a new revival of worldwide interest in extra-high-voltage (EHV) and ultra-high-voltage (UHV) transmission, High Voltage Engineering merges the latest research with the extensive experience of the best in the field to deliver a comprehensive treatment of electrical insulation systems for the next generation of utility engineers and electric power professionals. The book offers extensive coverage of the physical basis of high-voltage engineering, from insulation stress and strength to lightning attachment and protection and beyond. Presenting information critical to the design, selection, testing, maintenance, and operation of a myriad of high-voltage power equipment, this must-have text: Discusses power system overvoltages, electric field calculation, and statistical analysis of ionization and breakdown phenomena essential for proper planning and interpretation of high-voltage tests Considers the breakdown of gases (SF6), liquids (insulating oil), solids, and composite materials, as well as the breakdown characteristics of long air gaps Describes insulation systems currently used in high-voltage engineering, including air insulation and insulators in overhead power transmission lines, gas-insulated substation (GIS) and cables, oil-paper insulation in power transformers, paper-oil insulation in high-voltage cables, and polymer insulation in cables Examines contemporary practices in insulation coordination in association with the International Electrotechnical Commission (IEC) definition and the latest standards Explores high-voltage testing and measuring techniques, from generation of test voltages to digital measuring methods With an emphasis on handling practical situations encountered in the operation of high-voltage power equipment, High Voltage Engineering provides readers with a detailed, real-world understanding of electrical insulation systems, including the various factors affecting—and the actual means of evaluating—insulation performance and their application in the establishment of technical specifications.