This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.

Pressuremeter Testing: Methods and Interpretation the history, applications, and development of pressumeter devices and related test procedures. The book covers topics such as the general principles of pressuremeter testing; types of pressuremeters and their installation and calibration; and the estimation of soil from pressuremeter tests in clays, sands, and weak rocks. Also included are topics such as the application of pressuremeter testing to design and research in the improvement of the use of pressuremeters. An appendix is also included; Appendix A covers the analysis of pressuremeter tests, and Appendix B contains guidance notes for the specifications of pressuremeter tests. The text is recommended for engineers and geologists who would like to know more about the applications of the pressuremeter and the interpretation of its results.

This classic title deals presents all one needs to know about pressuremeter test, a soil and rock test used in civil engineering. It consists of placing a cylindrical probe in the ground and expanding the probe to pressurize the soil or the rock horizontally. The pressure on the soil and the relative increase in cavity radius are obtained and give an in situ stress strain curve. The pressuremeter test is repeated at various depths in order to obtain profiles of soil parameters. The design applications of the preboring pressuremeter test include: shallow foundations under vertical loads, deep foundations under vertical and horizontal loads, ground anchors, cantilever drilled shaft walls and anchored bulkheads, pavements, stone columns, ground improvement and compaction control.

For undergraduate/graduate-level foundation engineering courses. Covers the subject matter thoroughly and systematically, while being easy to read. Emphasizes a thorough understanding of concepts and terms before proceeding with analysis and design, and carefully integrates the principles of foundation engineering with their application to practical design problems.

This manual presents procedures and guidelines applicable to the use of the cone penetration test. It represents the author's interpretation of the state-of-the-art in Dutch static cone testing as of February 1977. Its contents should provide assistance and uniformity to engineers concerned with the interpretation of the data obtained from such testing. Only geotechnical engineers familiar with the fundamentals of soil mechanics and foundation engineering should use this manual. The manual includes: Introduction and review of the general principals concerning cone penetrometer testing. Individual design chapters which address topics such as: pile design, shear strength estimation, settlement calculation and compaction control; and Appendices which present previously published, pertinent information on cone penetrometer testing.

The revision of this best-selling text for a junior/senior course in Foundation Analysis and Design now includes an IBM computer disk containing 16 compiled programs together with the data sets used to produce the output sheets, as well as new material on sloping ground, pile and pile group analysis, and procedures for an improved anlysis of lateral piles. Bearing capacity analysis has been substantially revised for footings with horizontal as well as vertical loads. Footing design for overturning now incorporates the use of the same uniform linear pressure concept used in ascertaining the bearing capacity. Increased emphasis is placed on geotextiles for retaining walls and soil nailing.