While millions of Ford rear-wheel-drive cars are equipped with the durable and simple C4 and C6 transmissions of the 1960s, early in the 1980s Ford replaced those old designs with the AOD transmission for a new generation of cars. Overdrive gears, once popular before WWII, were now becoming popular again, as manufacturers were under increasing pressure to raise fuel economy to meet ever more demanding EPA standards. A nice byproduct of that was more comfortable cruising speeds, where your engine didn't have to work so hard in addition to getting better fuel economy. In Ford AOD Transmissions: Rebuilding and Modifying the AOD, AODE and 4R70W, author George Reid walks you through the process step-by-step, from removing the transmission from the vehicle, to complete disassembly and cleaning, to careful reassembly, to proper re-installation and road testing. Performance modifications are also covered, as well as an ID guide for various model numbers, evolutionary design changes, shift kit installation, and torque converter selection. This book is ideal for people who already have one of these transmissions in their car, as well as enthusiasts who would like to swap one of these more modern units into an older chassis to get all the benefits of overdrive. If you plan on researching or working on any one of these overdrive models, this book is a vital addition to your workbench or library.

Automatic AOD, BW 35/40, LE85/91/93/95/97, C4, C5, C6, C9, C10, FMX and M51. Manual 3 speed, 4 speed and 5 speed single rail, Top Loader, T5 and M57. Step by step instructions for a pull down and rebuild. Includes specifications, torque settings, problem diagnosis, shift speeds plus more information. This book is from an Australian publisher, and covers both American and Australian applications.

Ford's 351 Cleveland was designed to be a "mid-sized" V-8 engine, and was developed for higher performance use upon its launch in late 1969 for the 1970 models. The Cleveland engine addressed the major shortcoming of the Windsor engines that preceded it, namely cylinder head air flow. The Windsor engines just couldn't be built at the time to compete effectively with the strongest GM and Mopar small-block offerings, and the Cleveland engine was the answer to that problem. Unfortunately, the Cleveland engine was introduced at the end of Detroit's muscle car era, and the engine, in pure Cleveland form, was very short lived. It did continue on as a low compression passenger car and truck engine in the form of the 351M and 400M, which in their day, offered little in the way of excitement. Renewed enthusiasm in this engine has spawned an influx of top-quality new components that make building or modifying these engines affordable. This new book reviews the history and variations of the 351 Cleveland and Ford's related engines, the 351M and 400M. Basic dimensions and specifications of each engine, along with tips for identifying both design differences and casting numbers are covered. In addition, each engine's strong points and areas of concern are described in detail. Written with high performance in mind, both traditional power tricks and methods to increase efficiency of these specific engines are shared. Also, example builds of 400-, 500-, and even 600-hp engines are highlighted, so you can model your build after any of these powerhouses, depending on your intended use. With the influx of aftermarket parts, especially excellent cylinder heads, the 351 Cleveland as well as the 351M and 400m cousins are now seen as great engines to build. This book will tell you everything you need to know to build a great street or competition engine based in the 351 Cleveland platform.

This revised and updated color edition of How to Rebuild the Small-Block Ford walks you step by step through a rebuild, including: planning your rebuild, disassembly and inspection, choosing the right parts, machine work, assembling your engine, and first firing and break-in.

Covers rear-wheel drive models (C3, C4, C5, C6, and AOD) and front-wheel drive models (ATX/FLC and AXOD). Included are the fundamentals, diagnosis techniques, and modifications.

The Ford modular engine is a popular swap for 1964-1/2-1973 Mustangs, Fox-Body Mustangs, trucks, hot rods, and other muscle cars because these high-tech engines provide exceptional performance and improved economy compared to their dated counterparts. Found in Mustangs and other Fords since the 1990s, installing a modular motor in a classic Ford infuses new technology and all the benefits that come with it into a classic car. Modular engines feature an overhead cam design that has massive horsepower potential, and are offered in 4.6-, 5.0-, 5.2- 5.4-, and 5.8-liter iterations. These high-tech 2-, 3-, and 4-valve engines are readily available as a crate engine, from salvage yards, and in running cars. This engine design has a large physical footprint, and swapping the engine requires a thorough plan, using the proper tools and facilities. Author Dave Stribling specializes in modular engine swaps, and expertly guides you through each crucial step of the engine transplant process. Because of the large physical size, many components, such as brake boosters, steering rods and boxes, and other underhood components, may need repositioning or modification to co-exist in the engine bay. Stribling covers motor-mount selection and fabrication, suspension and chassis modifications, aftermarket suspension options, firewall and transmission tunnel modifications, engine management and wiring procedures, fuel systems, exhaust systems, electrical mods and upgrades, and much more. Many older Ford muscle and performance cars are prime candidates for a modular swap; however, shock towers protrude into the engine bay of these cars, so modifications are necessary to fit the engine into the car, which is also covered here. Swapping the engine and transmission into a muscle car or truck requires specialized processes, and this insightful, explanatory, and detailed instruction is found only in this book. If you are considering swapping one of these high-tech engines into a non-original chassis, this book is a vital component to the process. p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px Arial}

Ford's 4.6-liter-powered Mustang is the last remaining "classic" muscle car in the world and is incredibly popular with performance enthusiasts. More than 1,000,000 Mustangs have been built since 1996. Covers all 4.6 and 5.4-liter "Modular" motors--Ford's only V8 engine for Mustangs, fullsize cars, and light trucks from 1996 to 2004.

A driveline expert guides you through each step of the rebuild process for 8.8- and 9-inch axle assemblies, so you can confidently complete the work yourself. He explains in detail limited-slip and open differential disassembly, inspection, assembly, final calibration, and break-in. He also shows you how to identify worn ring-and-pinion gears, rebuild clutch packs, set the correct contact pattern for pinion and ring gears as well as the backlash, and much more.

Forty years after its introduction, the Fox Body Mustang has come of age, and this new book chronicles all the best procedures for restoring these affordable yet appreciating classics! In this new Restoration series title from CarTech, all the procedures and best practices for restoring your Fox Body will be covered. Chapter subjects include a history of the cars, tools, and equipment required; body repair; interior refurbishment; the climate control system; wheels; engine and driveline rebuilding; electrical troubleshooting and repair; and finally a large index of Fox Mustang facts, including paint codes, production numbers, option codes, data plate decoding, and more. Never before has Fox Body Mustang restoration been covered in a full-color instructional format. If you are considering a full-blown restoration, or would just like some good advice on how to repair certain sections of your car, this restoration guide is a valuable tool in your toolbox.

Covers everything you need to know about selecting the most desirable gear ratio, rebuilding differentials and other driveline components, and most importantly, matching the correct driveline components to engine power output.