The central purpose of this book is to impart knowledge, skills and practical - plementation methods for the planning and operation of adaptable production - cilities and factories. It addresses planning methods and procedures for various types of production facility up to and including entire factories, and is aimed at practicing factory planners and students alike. The book provides facts and demonstrates practical processes using case studies for the purposes of illustration, so that ultimately skills can be acquired that make independent practical implementation and app- cation possible. It is based on up-to-the-minute practical experience and univ- sally applicable knowledge of the planning and technological design of adaptable production facilities (manufacturing and assembly) and factories. In comparison to existing, thematically-similar reference books, what is in- vative about this manual is that it provides the impulse for a more flexible pl- ning approach for the efficient design of adaptable production facilities using - sponsive, unconventional planning and organizational solutions. The book aims to provide a way of integrating systematic and situation-driven planning methods in a meaningful way. Situation-driven planning is becoming increasingly important to production facilities in these fast-moving times of change, in particular in terms of resource and energy efficiency. Existing technical and organizational course of action in terms of resources (both human and technical) need to be selected for the specific case at hand, and changes (to workshops, products, processes and equ- ment) need to be managed.

This handbook introduces a methodical approach and pragmatic concept for the planning and design of changeable factories that act in strategic alliances to supply the ever-changing needs of the global market. In the first part, the change drivers of manufacturing enterprises and the resulting new challenges are considered in detail with focus on an appropriate change potential. The second part concerns the design of the production facilities and systems on the factory levels work place, section, building and site under functional, organisational, architectural and strategic aspects keeping in mind the environmental, health and safety aspects including corporate social responsibility. The third part is dedicated to the planning and design method that is based on a synergetic interaction of process and space. The accompanying project management of the planning and construction phase and the facility management for the effective utilization of the built premises close the book. The Authors Prof. em. Dr.-Ing. Dr. mult. h.c. Hans-Peter Wiendahl has been director for 23 years of the Institute of Factory planning and Logistics at the Leibniz University of Hannover in Germany. Prof. Dipl.-Ing. Architekt BDA Jürgen Reichardt is Professor at the Muenster school of architecture and partner of RMA Reichardt – Maas – Associate Architects in Essen Germany. Prof. Dr.-Ing. habil. Peter Nyhuis is Managing Director of the Institute of Factory Planning and Logistics at the Leibniz University of Hannover in Germany.

A step-by-step guide to planning new factories and plant rearrangements, this book describes proven analytical methods for: Calculating space requirements, Activity-pair relationships, Materials handling analysis, Generating alternative layout. This proven strategy masterfully weaves together the very best elements of layout methods for manufacturing cells, JIT, demand-flow and constraint-based flow manufacturing philosophies, in addition to traditional job shop and assembly line operations. Learn how to methodically reduce or totally rid a design of profit eroders during the plan/design of a cost efficient manufacturing layout.

The Lean Manufacturing Implementation Guide is a "how to" book that describes and documents the proven steps necessary to complete a successful lean transformation in a manufacturing facility. It reduces the manufacturer's fear of change by providing proven, objective and standard how to methods that are understandable and can be easily applied. The book is designed for manufacturing and engineering management personnel.

Pipeline Planning and Construction Field Manual aims to guide engineers and technicians in the processes of planning, designing, and construction of a pipeline system, as well as to provide the necessary tools for cost estimations, specifications, and field maintenance. The text includes understandable pipeline schematics, tables, and DIY checklists. This source is a collaborative work of a team of experts with over 180 years of combined experience throughout the United States and other countries in pipeline planning and construction. Comprised of 21 chapters, the book walks readers through the steps of pipeline construction and management. The comprehensive guide that this source provides enables engineers and technicians to manage routine auditing of technical work output relative to technical input and established expectations and standards, and to assess and estimate the work, including design integrity and product requirements, from its research to completion. Design, piping, civil, mechanical, petroleum, chemical, project production and project reservoir engineers, including novices and students, will find this book invaluable for their engineering practices. - Back-of-the envelope calculations - Checklists for maintenance operations - Checklists for environmental compliance - Simulations, modeling tools and equipment design - Guide for pump and pumping station placement

What is a game? -- The game industry -- Roles on the team -- Teams -- Effective communication -- Game production overview -- Game concept -- Characters, setting, and story -- Game requirements -- Game plan -- Production cycle -- Voiceover and music -- Localization -- Testing and code releasing -- Marketing and public relations.

This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern, the University of California Berkeley, and University of California Davis. The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available. This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing.

Intimesofdecliningeconomicgrowth,companieshavetocontroltheircostsmore than ever to saveresources needed in the future. Regardless of the economic size of the company, the processes of production and logistics play a decisive role in stabilizing procedures and avoiding waste. Both are important cost drivers in manufacturing companies and therefore they o?er large potential savings. Pervasive networking in the last years has contributed to a hitherto unknown transparency of global markets. This harmonization opened up new possibilities of entering foreign markets for procurement and sales to the companies. The emerging global procurement strategy was understood as a chance to rethink the relocation of existing production facilities to pro?t from existing di?erences in price and performance as a resource-saving factor. Many companies tended towards a reduction of their vertical integration by outsourcing sections of their value chain. These contracted services of production result in higher transport volumes, increased complexity of supply processes and new requirements on - gistic networks. This trend of outsourcing has not stopped, but is slowing down noticeably. Additionally,thereisanincreasingproportionofcompaniesrestoring business units that were outsourced before. Reasons for turning back decisions are often to be found in missed goals. It is not unusual that important cost f- tors were disregarded in the original basis of decision-making. In the meantime many companies have realized that it is easier to achieve stability of processes and therewith a control of costs by increasing their own contribution to p- duction. Especially in times of under-utilized capacities like in the current crisis, insourcingcanbeastrategicoption.

The Product Wheel (PW) design process has practical methods for finding the optimum sequence, minimizing changeover costs, and freeing up useful capacity. So much so, that the DuPont Company and Exxon Mobil are just a few companies that have used the product wheel concept to achieve and sustain a competitive advantage.Breaking down a fairly comple