This book gathers papers presented at the International Conference “Educational Robotics in the Maker Era – EDUROBOTICS 2018”, held in Rome, Italy, on October 11, 2018. The respective chapters explore the connection between the Maker Movement on the one hand, and Educational Robotics, which mainly revolves around the constructivist and constructionist pedagogy, on the other. They cover a broad range of topics relevant for teacher education and for designing activities for children and youth, with an emphasis on using modern low-cost technologies (including block-based programming environments, Do-It-Yourself electronics, 3D printed artifacts, intelligent distributed systems, IoT technology and gamification) in formal and informal education settings. The twenty contributions collected here will introduce researchers and practitioners to the latest advances in educational robotics, with a focus on science, technology, engineering, arts and mathematics (STEAM) education. Teachers and educators at all levels will find valuable insights and inspirations into how educational robotics can promote technological interest and 21st century skills – e.g. creativity, critical thinking, teamwork, and problem-solving – with a special emphasis on new making technologies.

This book will offer ideas on how robots can be used as teachers' assistants to scaffold learning outcomes, where the robot is a learning agent in self-directed learning who can contribute to the development of key competences for today's world through targeted learning - such as engineering thinking, math, physics, computational thinking, etc. starting from pre-school and continuing to a higher education level. Robotization is speeding up at the moment in a variety of dimensions, both through the automation of work, by performing intellectual duties, and by providing support for people in everyday situations. There is increasing political attention, especially in Europe, on educational systems not being able to keep up with such emerging technologies, and efforts to rectify this. This edited volume responds to this attention, and seeks to explore which pedagogical and educational concepts should be included in the learning process so that the use of robots is meaningful from the point of view of knowledge construction, and so that it is safe from the technological and cybersecurity perspective.

This book describes recent approaches in advancing STEM education with the use of robotics, innovative methods in integrating robotics in school subjects, engaging and stimulating students with robotics in classroom-based and out-of-school activities, and new ways of using robotics as an educational tool to provide diverse learning experiences. It addresses issues and challenges in generating enthusiasm among students and revamping curricula to provide application focused and hands-on approaches in learning . The book also provides effective strategies and emerging trends in using robotics, designing learning activities and how robotics impacts the students’ interests and achievements in STEM related subjects. The frontiers of education are progressing very rapidly. This volume brought together a collection of projects and ideas which help us keep track of where the frontiers are moving. This book ticks lots of contemporary boxes: STEM, robotics, coding, and computational thinking among them. Most educators interested in the STEM phenomena will find many ideas in this book which challenge, provide evidence and suggest solutions related to both pedagogy and content. Regular reference to 21st Century skills, achieved through active collaborative learning in authentic contexts, ensures the enduring usefulness of this volume. John Williams Professor of Education and Director of the STEM Education Research Group Curtin University, Perth, Australia

This open access book contains observations, outlines, and analyses of educational robotics methodologies and activities, and developments in the field of educational robotics emerging from the findings presented at FabLearn Italy 2019, the international conference that brought together researchers, teachers, educators and practitioners to discuss the principles of Making and educational robotics in formal, non-formal and informal education. The editors’ analysis of these extended versions of papers presented at FabLearn Italy 2019 highlight the latest findings on learning models based on Making and educational robotics. The authors investigate how innovative educational tools and methodologies can support a novel, more effective and more inclusive learner-centered approach to education. The following key topics are the focus of discussion: Makerspaces and Fab Labs in schools, a maker approach to teaching and learning; laboratory teaching and the maker approach, models, methods and instruments; curricular and non-curricular robotics in formal, non-formal and informal education; social and assistive robotics in education; the effect of innovative spaces and learning environments on the innovation of teaching, good practices and pilot projects.

Over the last few years, increasing attention has been focused on the development of children’s acquisition of 21st-century skills and digital competences. Consequently, many education scholars have argued that teaching technology to young children is vital in keeping up with 21st-century employment patterns. Technologies, such as those that involve robotics or coding apps, come at a time when the demand for computing jobs around the globe is at an all-time high while its supply is at an all-time low. There is no doubt that coding with robotics is a wonderful tool for learners of all ages as it provides a catalyst to introduce them to computational thinking, algorithmic thinking, and project management. Additionally, recent studies argue that the use of a developmentally appropriate robotics curriculum can help to change negative stereotypes and ideas children may initially have about technology and engineering. The Handbook of Research on Using Educational Robotics to Facilitate Student Learning is an edited book that advocates for a new approach to computational thinking and computing education with the use of educational robotics and coding apps. The book argues that while learning about computing, young people should also have opportunities to create with computing, which have a direct impact on their lives and their communities. It develops two key dimensions for understanding and developing educational experiences that support students in engaging in computational action: (1) computational identity, which shows the importance of young people’s development of scientific identity for future STEM growth; and (2) digital empowerment to instill the belief that they can put their computational identity into action in authentic and meaningful ways. Covering subthemes including student competency and assessment, programming education, and teacher and mentor development, this book is ideal for teachers, instructional designers, educational technology developers, school administrators, academicians, researchers, and students.

The education system is constantly growing and developing as more ways to teach and learn are implemented into the classroom. Recently, there has been a growing interest in teaching computational thinking with schools all over the world introducing it to the curriculum due to its ability to allow students to become proficient at problem solving using logic, an essential life skill. In order to provide the best education possible, it is imperative that computational thinking strategies, along with programming skills and the use of robotics in the classroom, be implemented in order for students to achieve maximum thought processing skills and computer competencies. The Research Anthology on Computational Thinking, Programming, and Robotics in the Classroom is an all-encompassing reference book that discusses how computational thinking, programming, and robotics can be used in education as well as the benefits and difficulties of implementing these elements into the classroom. The book includes strategies for preparing educators to teach computational thinking in the classroom as well as design techniques for incorporating these practices into various levels of school curriculum and within a variety of subjects. Covering topics ranging from decomposition to robot learning, this book is ideal for educators, computer scientists, administrators, academicians, students, and anyone interested in learning more about how computational thinking, programming, and robotics can change the current education system.

Teaching models that focus on blended and virtual learning have become important during the past year and have become integral for the continuance of learning. The i²Flex classroom model, a variation of blended learning, allows non-interactive teaching activities to take place without teachers’ direct involvement, freeing up time for more meaningful teacher-student and student-student interactions. There is evidence that i²Flex leads to increased student engagement and motivation as well as better exploitation of teachers’ and classroom time leading to the development of higher order cognitive skills as well as study skills for students' future needs related to citizenship, college, and careers. The Handbook of Research on K-12 Blended and Virtual Learning Through the i²Flex Classroom Model focuses not only on how to design, deliver, and evaluate courses, but also on how to assess teacher performance in a blended i2Flex way at the K12 level. The book will discuss the implementation of the i²Flex (isquareFlex), a non-traditional learning methodology, which integrates internet-based delivery of content and instruction with faculty-guided, student-independent learning in combination with face-to-face classroom instruction aiming at developing higher order cognitive skills within a flexible learning design framework. While highlighting new methods for improving the classroom and learning experience in addition to preparing students for higher education and careers, this publication is an essential reference source for pre-service and in-service teachers, researchers, administrators, educational technology developers, and students interested in how the i2Flex model was implemented in classrooms and the effects of this learning model.

This proceedings book comprises the latest achievements in research and development in educational robotics presented at the 11th International Conference on Robotics in Education (RiE), which was carried out as a purely virtual conference from September 30 to October 2, 2020. Researchers and educators will find valuable methodologies and tools for robotics in education that encourage learning in the fields of science, technology, engineering, arts and mathematics (STEAM) through the design, creation and programming of tangible artifacts for creating personally meaningful objects and addressing real-world societal needs. This also involves the introduction of technologies ranging from robotics platforms to programming environments and languages. Evaluation results prove the impact of robotics on the students’ interests and competence development. The presented approaches cover the whole educative range from elementary school to university in both formal as well as informal settings.

The field of robotics in a classroom context has seen an increase in global momentum recently because of its positive contributions in the teaching of science, technology, engineering, mathematics (STEM) and beyond. It is argued that when robotics and programming are integrated in developmentally appropriate ways, cognitive skill development beyond STEM can be achieved. The development of educational robotics has presented a plethora of ways in which students can be assisted in the classroom. Designing, Constructing, and Programming Robots for Learning highlights the importance of integrating robotics in educational practice and presents various ways for how it can be achieved. It further explains how 21st century skills and life skills can be developed through the hands-on experience of educational robotics. Covering topics such as computational thinking, social skill enhancement, and teacher training, this text is an essential resource for engineers, educational software developers, teachers, professors, instructors, researchers, faculty, leaders in educational fields, students, and academicians.