Diffuse seismicity refers to earthquakes occurring in locations where no apparent correlation can be made with any causative faults. This publication provides guidance for addressing the seismic hazard from diffuse seismicity in a manner consistent with internationally recognized practices and with reference to relevant IAEA safety standards.

This Safety Guide supersedes the 2010 edition of IAEA Safety Standards Series No. SSG-9. It takes account of recently gained knowledge and practices developed by Member States related to seismic hazards, especially lessons from the Fukushima Daiichi accident. It also addresses concomitant events associated with earthquakes, such as tsunamis. The revision provides a clearer separation between the process for assessing the seismic hazards at a specific nuclear installation site and the process for defining the related basis for design and safety assessment of the nuclear installation. Thus, it bridges gaps and avoids undue overlap of the two processes, which correspond to and are performed at different stages of siting of the nuclear installation.

Provides the state-of-the-art practice and detailed technical elements related to ground motion evaluation by ground motion prediction equations (GMPEs) and site response in the context of seismic hazard assessments as recommended in IAEA Safety Standards Series No. SSG-9, Seismic Hazards in Site Evaluation for Nuclear Installations.

Explaining the principles that underlie strong ground motion simulation, this publication describes various methods for simulating strong ground motions, and presents some examples of strong ground motion simulations using fault rupture modelling. The detailed guidelines and practical tools presented in this Safety Report will be of value to researchers, operating organizations, regulatory bodies, vendors and technical support organizations in the areas of seismic hazard evaluation of nuclear installations. The information provided will also be of great importance for seismic hazard assessments following the Fukushima Daiichi nuclear power plant accident.

In the past several years, some energy technologies that inject or extract fluid from the Earth, such as oil and gas development and geothermal energy development, have been found or suspected to cause seismic events, drawing heightened public attention. Although only a very small fraction of injection and extraction activities among the hundreds of thousands of energy development sites in the United States have induced seismicity at levels noticeable to the public, understanding the potential for inducing felt seismic events and for limiting their occurrence and impacts is desirable for state and federal agencies, industry, and the public at large. To better understand, limit, and respond to induced seismic events, work is needed to build robust prediction models, to assess potential hazards, and to help relevant agencies coordinate to address them. Induced Seismicity Potential in Energy Technologies identifies gaps in knowledge and research needed to advance the understanding of induced seismicity; identify gaps in induced seismic hazard assessment methodologies and the research to close those gaps; and assess options for steps toward best practices with regard to energy development and induced seismicity potential.

The destructive force of earthquakes has stimulated human inquiry since ancient times, yet the scientific study of earthquakes is a surprisingly recent endeavor. Instrumental recordings of earthquakes were not made until the second half of the 19th century, and the primary mechanism for generating seismic waves was not identified until the beginning of the 20th century. From this recent start, a range of laboratory, field, and theoretical investigations have developed into a vigorous new discipline: the science of earthquakes. As a basic science, it provides a comprehensive understanding of earthquake behavior and related phenomena in the Earth and other terrestrial planets. As an applied science, it provides a knowledge base of great practical value for a global society whose infrastructure is built on the Earth's active crust. This book describes the growth and origins of earthquake science and identifies research and data collection efforts that will strengthen the scientific and social contributions of this exciting new discipline.

This publication provides comprehensive and updated guidance for site evaluation in relation to volcanic hazards. It includes recommendations on assessing the volcanic hazards at a nuclear installation site, in order to identify and characterize, in a comprehensive manner, all potentially hazardous phenomena that may be associated with future volcanic events. It describes how some of these volcanic phenomena may affect the acceptability of the selected site, resulting in exclusion of a site or determining the corresponding design basis parameters for the installation. This Safety Guide is applicable to both existing and new sites, and a graded approach is recommended to cater for all types of nuclear installations. Contents: 1. Introduction; 2. Overview of volcanic hazard assessment; 3. General recommendations; 4. Necessary information and investigations (database); 5. Screening of volcanic hazards; 6. Site specific volcanic hazard assessment

Proceedings of the NATO Advanced Research Workshop on Coupled Site and Soil-Structure Interaction Effects with Application to Seismic Risk Mitigation Borovets, Bulgaria 30 August - 3 September 2008

This publication provides information on detailed methodologies and examples in the application of volcanic hazard assessment to site evaluation for nuclear installations, thereby addressing the recommendations in IAEA Safety Standards Series No. SSG-21, Volcanic Hazards in Site Evaluation for Nuclear Installations. It demonstrates the practicability of evaluating the recommendations through a systematic volcanic hazard assessment and examples from Member States. The results of this hazard assessment can be used to derive the appropriate design bases and operational considerations for specific nuclear installations.

Here is unique and comprehensive coverage of modern seismic instrumentation, based on the authors’ practical experience of a quarter-century in seismology and geophysics. Their goal is to provide not only detailed information on the basics of seismic instruments but also to survey equipment on the market, blending this with only the amount of theory needed to understand the basic principles. Seismologists and technicians working with seismological instruments will find here the answers to their practical problems. Instrumentation in Earthquake Seismology is written to be understandable to the broad range of professionals working with seismological instruments and seismic data, whether students, engineers or seismologists. Whether installing seismic stations, networks and arrays, working and calibrating stationary or portable instruments, dealing with response information, or teaching about seismic instruments, professionals and academics now have a practical and authoritative sourcebook. Includes: SEISAN and SEISLOG software systems that are available from http://extras.springer.com and http://www.geo.uib.no/seismo/software/software.html