Environmental sustainability and development is of critical importance. Technological advances in the production of new energy sources are making their way into our lives in more and more depth every day. However, there is an urgent need to address the technological challenges and advancement of the various chemical and bio-processes to maintain the dynamic sustainability of our energy needs. Toward that end, an attempt is being made to look at recent advances, key issues still faced and where possible, offer suggestions on alternative technologies to optimize sustainable processes. Still considered a new area of science, energy sources themselves are still being 'discovered'...meaning, what is financially viable in the current marketplace is changing. For example, energy from plants has not been financially viable in the past because of the high cost of growing, harvesting, breaking down cell walls, disposal of waste products, etc. Materials used to derive energy from sustainable resources is changing, making previously high-cost processes more efficient. It is crucial that the industry as a while works in tandem to develop crops that new technological advances make financially feasible. This book will cover recent advances in the chemicals, bioprocesses and other materials used in growing and extracting energy from sustainable products. Membrane/cell wall digestion issues will also be covered as well as recovering mamixal amounts of energy from sources to limit waste. Finally a section on safety and control will be presented with has been poorly covered in other publications. ​

Chemicals from Biomass: Integrating Bioprocesses into Chemical Production Complexes for Sustainable Development helps engineers optimize the development of new chemical and polymer plants that use renewable resources to replace the output of goods and services from existing plants. It also discusses the conversion of those existing plants into faci

Bioprocess technology involves the combination of living matter (whole organism or enzymes ) with nutrients under laboratory conditions to make a desired product within the pharmaceutical, food, cosmetics, biotechnology, fine chemicals and bulk chemicals sectors. Industry is under increasing pressure to develop new processes that are both environmentally friendly and cost-effective, and this can be achieved by taking a fresh look at process development; - namely by combining modern process modeling techniques with sustainability assessment methods. Development of Sustainable Bioprocesses: Modeling and Assessment describes methodologies and supporting case studies for the evolution and implementation of sustainable bioprocesses. Practical and industry-focused, the book begins with an introduction to the bioprocess industries and development procedures. Bioprocesses and bioproducts are then introduced, together with a description of the unit operations involved. Modeling procedures, a key feature of the book, are covered in chapter 3 prior to an overview of the key sustainability assessment methods in use (environmental, economic and societal). The second part of the book is devoted to case studies, which cover the development of bioprocesses in the pharmaceutical, food, fine chemicals, cosmetics and bulk chemicals industries. Some selected case studies include: citric acid, biopolymers, antibiotics, biopharmaceuticals. Supplementary material provides hands-on materials so that the techniques can be put into practice. These materials include a demo version of SuperPro Designer software (used in process engineering) and models of all featured case studies, excel sheets of assessment methods, Monte Carlo simulations and exercises. Previously available on CD-ROM, the supplementary material can now be accessed via http://booksupport.wiley.com by entering the author name, book title or isbn and clicking on the desired entry. This will then give a listing of all the content available for download. Please read any text files before downloading material.

Bioprocess Engineering involves the design and development of equipment and processes for the manufacturing of products such as food, feed, pharmaceuticals, nutraceuticals, chemicals, and polymers and paper from biological materials. It also deals with studying various biotechnological processes. "Bioprocess Kinetics and Systems Engineering" first of its kind contains systematic and comprehensive content on bioprocess kinetics, bioprocess systems, sustainability and reaction engineering. Dr. Shijie Liu reviews the relevant fundamentals of chemical kinetics-including batch and continuous reactors, biochemistry, microbiology, molecular biology, reaction engineering, and bioprocess systems engineering- introducing key principles that enable bioprocess engineers to engage in the analysis, optimization, design and consistent control over biological and chemical transformations. The quantitative treatment of bioprocesses is the central theme of this book, while more advanced techniques and applications are covered with some depth. Many theoretical derivations and simplifications are used to demonstrate how empirical kinetic models are applicable to complicated bioprocess systems. - Contains extensive illustrative drawings which make the understanding of the subject easy - Contains worked examples of the various process parameters, their significance and their specific practical use - Provides the theory of bioprocess kinetics from simple concepts to complex metabolic pathways - Incorporates sustainability concepts into the various bioprocesses

Evaluating a wealth of quantitative data, Biofuels: Biotechnology, Chemistry, and Sustainable Development discusses different types of biofuels, the science behind their production, the economics of their introduction to the marketplace, their environmental impacts, and their implications for world agriculture. It broadens the discussion on biofuel

Sets the stage for large-scale production of biofuels and bio-based chemicals In response to diminishing supplies as well as the environmental hazards posed by fossil fuels and petrochemicals, interest and demand for green, sustainable biofuels and bio-based chemicals are soaring. Biomass may be the solution. It is an abundant carbon-neutral renewable feedstock that can be used for the production of fuels and chemicals. Currently, biorefineries use corn, soybeans, and sugarcane for bioethanol and biodiesel production; however, there are many challenges facing biorefineries, preventing biomass from reaching its full potential. This book provides a comprehensive review of bioprocessing technologies that use lignocellulosic biomass for the production of biofuels, biochemicals, and biopolymers. It begins with an overview of integrated biorefineries. Next, it covers: Biomass feedstocks, including sugar, starch, oil, and energy crops as well as microalgae Pretreatment technologies for lignocellulosic biomass Hydrolytic enzymes used in biorefineries for the hydrolysis of starch and lignocelluloses Bioconversion technologies for current and future biofuels such as ethanol, biodiesel, butanol, hydrogen, and biogas Specialty chemicals, building block chemicals, and biopolymers produced via fermentation Phytochemicals and functional food ingredients extracted from plant materials All the chapters have been written and edited by leading experts in bioprocessing and biorefining technologies. Contributions are based on a thorough review of the literature as well as the authors' firsthand experience developing and working with bioprocessing technologies. By setting forth the current state of the technology and pointing to promising new directions in research, Bioprocessing Technologies in Biorefinery for Sustainable Production of Fuels, Chemicals, and Polymers will enable readers to move towards large-scale, sustainable, and economical production of biofuels and bio-based chemicals.

Biotechnology in the Chemical Industry: Towards a Green and Sustainable Future focuses on achievements and prospects for biotechnology in sustainable production of goods and services, especially those that are derived at present mostly from the traditional chemical industry. It considers the future impact of industrial biotechnology and lays out the major research areas which must be addressed to move from a flourishing set of scientific disciplines to a major contributor to a successful future knowledge-based economy. The book focuses on the research needed to underpin three broad topics: biomass, bio-processes and bio-products, including bio-energy. Readers, including advanced students, researchers, industry professionals, academics, analysts, consultants, and anyone else interested, or involved in biotechnology will find this book very informative. - Offers a comprehensive introduction to the subject for researchers interested in the biotechnological applications in chemical industry - Provides a state-of-the art update on the field - Presents the economic and ecological advantages of industrial biotechnology - Discusses efforts made by developing countries towards industrial biotechnology - Describes new biotechnological applications - Includes the major challenges facing industrial biotechnology

Chemical Engineering and Chemical Process Technology is a theme component of Encyclopedia of Chemical Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty Encyclopedias. Chemical engineering is a branch of engineering, dealing with processes in which materials undergo changes in their physical or chemical state. These changes may concern size, energy content, composition and/or other application properties. Chemical engineering deals with many processes belonging to chemical industry or related industries (petrochemical, metallurgical, food, pharmaceutical, fine chemicals, coatings and colors, renewable raw materials, biotechnological, etc.), and finds application in manufacturing of such products as acids, alkalis, salts, fuels, fertilizers, crop protection agents, ceramics, glass, paper, colors, dyestuffs, plastics, cosmetics, vitamins and many others. It also plays significant role in environmental protection, biotechnology, nanotechnology, energy production and sustainable economical development. The Theme on Chemical Engineering and Chemical Process Technology deals, in five volumes and covers several topics such as: Fundamentals of Chemical Engineering; Unit Operations – Fluids; Unit Operations – Solids; Chemical Reaction Engineering; Process Development, Modeling, Optimization and Control; Process Management; The Future of Chemical Engineering; Chemical Engineering Education; Main Products, which are then expanded into multiple subtopics, each as a chapter. These five volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs.

Current Developments in Biotechnology and Bioengineering: Bioprocesses, Bioreactors and Controls provides extensive coverage of new developments, state-of-the-art technologies, and potential future trends, reviewing industrial biotechnology and bioengineering practices that facilitate and enhance the transition of processes from lab to plant scale, which is becoming increasingly important as such transitions continue to grow in frequency. Focusing on industrial bioprocesses, bioreactors for bioprocesses, and controls for bioprocesses, this title reviews industrial practice to identify bottlenecks and propose solutions, highlighting that the optimal control of a bioprocess involves not only maximization of product yield, but also taking into account parameters such as quality assurance and environmental aspects. - Describes industrial bioprocesses based on the reaction media - Lists the type of bioreactors used for a specific bioprocess/application - Outlines the principles of control systems in various bioprocesses

The tremendous progress in biology over the last half century - from Watson and Crick's elucidation of the structure of DNA to today's astonishing, rapid progress in the field of synthetic biology - has positioned us for significant innovation in chemical production. New bio-based chemicals, improved public health through improved drugs and diagnostics, and biofuels that reduce our dependency on oil are all results of research and innovation in the biological sciences. In the past decade, we have witnessed major advances made possible by biotechnology in areas such as rapid, low-cost DNA sequencing, metabolic engineering, and high-throughput screening. The manufacturing of chemicals using biological synthesis and engineering could expand even faster. A proactive strategy - implemented through the development of a technical roadmap similar to those that enabled sustained growth in the semiconductor industry and our explorations of space - is needed if we are to realize the widespread benefits of accelerating the industrialization of biology. Industrialization of Biology presents such a roadmap to achieve key technical milestones for chemical manufacturing through biological routes. This report examines the technical, economic, and societal factors that limit the adoption of bioprocessing in the chemical industry today and which, if surmounted, would markedly accelerate the advanced manufacturing of chemicals via industrial biotechnology. Working at the interface of synthetic chemistry, metabolic engineering, molecular biology, and synthetic biology, Industrialization of Biology identifies key technical goals for next-generation chemical manufacturing, then identifies the gaps in knowledge, tools, techniques, and systems required to meet those goals, and targets and timelines for achieving them. This report also considers the skills necessary to accomplish the roadmap goals, and what training opportunities are required to produce the cadre of skilled scientists and engineers needed.