Decomposition of Alloys: The Early Stages contains the proceedings of the 2nd Acta-Scripta Metallurgica Conference held in Sonnenberg, Germany, on September 19-23, 1983. Contributors discuss the early stages of decomposition in alloys, placing emphasis on the unsolved problems of the field, rather than on the solved ones. This book has 36 chapters and opens with a discussion on developments in the theory of the kinetics of first-order phase transitions, followed by an analysis of metastability and spinodal nucleation; neutron scattering during decomposition of aluminum alloys; Ostwald ripening of precipitates; and phase stability under irradiation. The next chapters explore decomposition processes in Al-Zn alloys; thermal decomposition in Cu-Ni-Fe alloys; and the initial stages of discontinuous precipitation reactions. Other papers focus on the mechanisms of plate precipitate growth; spinodal decomposition and continuous ordering; and early stages of decomposition in Ni-Al single crystals. This monograph will be of interest to students and practitioners of physics and metallurgy.

This is the fourth edition of a work which first appeared in 1965. The first edition had approximately one thousand pages in a single volume. This latest volume has almost three thousand pages in 3 volumes which is a fair measure of the pace at which the discipline of physical metallurgy has grown in the intervening 30 years.Almost all the topics previously treated are still in evidence in this version which is approximately 50% bigger than the previous edition. All the chapters have been either totally rewritten by new authors or thoroughly revised and expanded, either by the third-edition authors alone or jointly with new co-authors. Three chapters on new topics have been added, dealing with dry corrosion, oxidation and protection of metal surfaces; the dislocation theory of the mechanical behavior of intermetallic compounds; and (most novel) a chapter on polymer science for metallurgists, which analyses the conceptual mismatch between metallurgists' and polymer scientists' way of looking at materials. Special care has been taken throughout all chapters to incorporate the latest experimental research results and theoretical insights. Several thousand citations to the research and review literature are included in this edition. There is a very detailed subject index, as well as a comprehensive author index.The original version of this book has long been regarded as the standard text in physical metallurgy and this thoroughly rewritten and updated version will retain this status.

This book contains the papers presented at the NATO Advanced Study Institute held at Geilo, Norway, 11th - 20th April 1975. The institute was the third in a row devoted to phase transitions. The previous two dealt with 2nd- and 1st-order transitions in equilibrium systems and the proceedings have been published.i~ In order to make an overlap wi th those institutes, the first part of this institute was devoted to 1st -or der transitions with an emphasis on the problems of metast abi l i t y and instability en countered i n spinodal decomposition, nucleation etc. The main topic was, however, that of non-equilibrium systems, and the present institute was to our knowledge the first one devoted to the physics of such systems. The discovery of the analogy between phase transitions in equilibrium systems and instabilities in non-equilibrium systems was first made by Rolf Landauer in 1961 and later independently by others. The analogy was first pointed out for electronic devices (tunnel diodes, Gunn oscillators, lasers, etc. ) and the treatment of hydrodynamic instabilities followed later.

For all kinds of materials, phase transformations show common phenomena and mechanisms, and often turn a material, for example metals, multiphase alloys, ceramics or composites, into its technological useful form. The physics and thermodynamics of a transformation from the solid to liquid state or from one crystal form to another are therefore essential for creating high-performance materials. This handbook covers phase transformations, a general phenomenon central to understanding the behavior of materials and for creating high-performance materials. It will be an essential reference for all materials scientists, physicists and engineers involved in the research and development of new high performance materials. It is the revised and enhanced edition of the renowned book edited by the late P. Haasen in 1990 (Vol. 5, Materials Science and Technology).

This proceedings volume contains research data from structural investigation of materials of high industrial value. Contents: Determination of Crystal Structure from Powder Diffraction by Rietveld Method; Development of Methods and Techniques in X-Ray, Electron and Neutron Diffraction; Crystallography of Phase Transformation, Martensitic Transformation in Shape Memory Alloys; Texture Studies, Defect Structure and Microstructure Characterisation; Material Structure: Metals, Ceramic, Polymers, Amorphous Materials, Nanomaterials and Thin Films. Readership: Graduate students and researchers in crystallography and materials science.

Phase transformations are among the most intriguing and technologically useful phenomena in materials, particularly with regard to controlling microstructure. After a review of thermodynamics, this book has chapters on Brownian motion and the diffusion equation, diffusion in solids based on transition-state theory, spinodal decomposition, nucleation and growth, instabilities in solidification, and diffusionless transformations. Each chapter includes exercises whose solutions are available in a separate manual. This book is based on the notes from a graduate course taught in the Centre for Doctoral Training in the Theory and Simulation of Materials. The course was attended by students with undergraduate degrees in physics, mathematics, chemistry, materials science, and engineering. The notes from this course, and this book, were written to accommodate these diverse backgrounds.

During the last five years transmission electron microscopy (TEM) has added numerous important new data to mineralogy and has considerably changed its outlook. This is partly due to the fact that metallurgists and crystal physicists having solved most of the structural and crystallographic problems in metals have begun to show a widening interest in the much more complicated structures of minerals, and partly to recent progress in experimental techniques, mainly the availability of ion-thinning devices. While electron microscopists have become increasingly interested in minerals (judging from special symposia at recent meetings such as Fifth European Congress on Electron microscopy, Man chester 1972; Eight International Congress on Electron Microscopy, Canberra 1974) mineralogists have realized advantages of the new technique and applied it with increasing frequency. In an effort to coordinate the growing quantity of research, electron microscopy sessions have been included in meetings of mineralogists (e. g. Geological Society of America, Minneapolis, 1972, American Crystallographic Association, Berkeley, 1974). The tremendous response for the TEM symposium which H. -R. Wenk and G. Thomas organized at the Berkeley Conference of the American Crystallographic Association formed the basis for this book. It appeared useful at this stage to summarize the achievements of electron microscopy, scattered in many different journals in several different fields and present them to mineralogists. A group of participants as the Berkeley symposium formed an Editorial Committee and outlined the content of this book.

Casting Aluminum Alloys summarizes research conducted at Moscow Institute of Steel and Alloy during many decades in part together with Alcoa Inc. The research covered areas of the structure, properties, thermal resistance, corrosion and fatigue of aluminum alloys in industrial manufacturing. - Emphasis on interconnection among phase equilibria, thermodynamics and microstructure of alloys - Systematic overview of all phase diagrams with Al that are important for the development of casting aluminium alloys - Diagrams ("processing windows") of important technological properties such as castability, molten metal fluidity, tendency to hot pre-solidification cracking, porosity - Mathematical models for alloy mechanical properties facilitating the down-selection of best prospect candidates for new alloy development - New principles of design of eutectic casting aluminium alloys - Examples of successful novel casting alloy development, including alloys for high-strength applications, alloys with transition metals, and novel alloys utilizing aluminium scrap

Proceedings of the 7th International Conference ICAA7, held in Charlottesville, Virginia, April 9-14, 2000