ICOLD Bulletin 150, Cutoffs for Dams, discusses foundation treatment methods using cutoff-type barriers. High emphasis is given to alluvial deposits throughout this document; however, different materials may require cutoff. The construction of cutoffs has made significant advances mainly through the development of more powerful machinery for drilling and excavation, but also through the introduction of new concepts and techniques, such as jet grouting and deep soil mixing. The following types of cutoffs are presented in this Bulletin: - Diaphragm walls - Vib walls - Pile walls - Superimposed concreted galleries - Jet grouting - Deep mixing These methods are described, and the practical application of each method is illustrated by selected case histories. These case histories also demonstrate how certain difficulties specific to a particular dam site have been dealt with. The performance of cutoffs should be monitored so that their efficiency in reducing flow and piezometric head can be evaluated. Piezometers installed in the foundation upstream and downstream of the cutoff are needed to meet this objective.

ICOLD Bulletin 150, Cutoffs for Dams, discusses foundation treatment methods using cutoff-type barriers. High emphasis is given to alluvial deposits throughout this document; however, different materials may require cutoff. The construction of cutoffs has made significant advances mainly through the development of more powerful machinery for drilling and excavation, but also through the introduction of new concepts and techniques, such as jet grouting and deep soil mixing. The following types of cutoffs are presented in this Bulletin: - Diaphragm walls - Vib walls - Pile walls - Superimposed concreted galleries - Jet grouting - Deep mixing These methods are described, and the practical application of each method is illustrated by selected case histories. These case histories also demonstrate how certain difficulties specific to a particular dam site have been dealt with. The performance of cutoffs should be monitored so that their efficiency in reducing flow and piezometric head can be evaluated. Piezometers installed in the foundation upstream and downstream of the cutoff are needed to meet this objective.

This proceedings book gathers contributions presented at the First International Conference on Embankment Dams (1st ICED, Beijing, 5–7 June 2020), which was the inaugural conference of the International Society of Soil Mechanics and Geotechnical Engineering (ISSMGE) Technical Committee TC210 on Embankment Dams. The contributions address five themes: (1) case histories on the failure of embankment dams and landslide dams; (2) dam failure process modelling; (3) soil mechanics for embankment dams; (4) dam risk assessment and management; and (5) monitoring, early warning and emergency response. These proceedings offer a unique resource that systematically presents recent dam breaching cases, their social impact, associated risk management strategies, and disposal methods for failed dams. It is an excellent reference guide for dam and levee engineers, flood safety officials, and emergency management agencies.

This book provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams and the review and assessment of existing dams. The book provides dam engineers and geologists with a practical approach, and gives university students an insight into the subject of dam engineering. All phases of investigation, design and construction are covered, through to the preliminary and detailed design phases and ultimately the construction phase. This revised and expanded 2nd edition includes a lengthy new chapter on the assessment of the likelihood of failure of dams by internal erosion and piping.

Dams are part of human achievements that induce great benefits for society but also bear a potential risk to people, property and the natural environment. The risk of a dam rupture is extremely low and diffi cult to quantify accurately. The aim of ‘Dam surveillance’ (ICOLD Bulletin 158), is to help reduce these risks by early detection of an undesirable event. The objective of dam surveillance is to make a precise and timely diagnosis of the behavior of dams, in order to prevent undesirable consequences. Both the monitoring system and surveillance program has to be designed and should be able to detect any abnormal behaviour. ‘Dam surveillance’ (ICOLD Bulletin 158), emphasizes the following aspects: • Routine visual inspection • Special inspection • Checking and testing of Hydro-electromechanical equipment • Monitoring parameters and devices • Automation • Maintenance of ageing monitoring systems • Re-instrumentation of existing dams • Recent developments • Data management • Dam documentation management • Assessment of dam condition and behaviour • Assessment of routine dam safety monitoring programme • Prioritization of maintenance, remedial and upgrading works.

Introductory technical guidance for civil and geotechnical engineers and construction managers interested in cutoff walls for earth and rockfill embankment dams. Here is what is discussed: 1. INTRODUCTION 2. DEEP SOIL MIXING AND JET GROUTING 3. GEOMEMBRANE, SHEET PILE AND SECANT CUTOFF WALLS 4. SLURRY TRENCH AND REINFORCED CONCRETE 5. SOIL BENTONITE SLURRY TRENCH 6. FOUNDATIONS AND ABUTMENTS .