In processes with condensation of steam-to-gas compositions or refrigerative agents an intensification of condensation is often required because thermal resistance on the condensation side can be greater than the thermal resistance of the heat transfer wall on the cooling side. In this work, a pair of researchers from the National Technical U. of Ukraine and the State Academy of Refrigeration (Ukraine) provide information about the enhancement of condensation, including research results from the former USSR they feel deserves wider dissemination as well as discussion of different theoretical models of the condensation process. The US office of WIT Press is Computational Mechanics. Annotation : 2004 Book News, Inc., Portland, OR (booknews.com).

This Brief deals with electrode design and placement, enhancement of both liquid and gas flow, vapor space condensation, in-tube condensation, falling film evaporation, correlations. It further provides a fundamental understanding of boiling and condensation, pool boiling, critical heat flux, convective vaporization, additives for single-phase liquids like solid particles, gas bubbles, suspensions in dilute polymer and surfactant solutions, solid additives and liquid additives for gases, additives for boiling, condensation and absorption, mass transfer resistance in gas phase (condensation with noncondensible gases, evaporation into air, dehumidifying finned tube heat exchangers, water film enhancement of finned tube exchanger), controlling resistance in liquid phase, and significant resistance in both phases. The volume is ideal for professionals and researchers dealing with thermal management in devices.

Indeed, today "second generation" enhancement concepts are routing in the automotive and refrigeration industries to obtain lower cost, smaller heat exchanger size, and higher energy efficiency in system operation. And the aerospace, process, and power generation industries are not far behind.

Dropwise Condensation on Textured Surfaces presents a holistic framework for understanding dropwise condensation through mathematical modeling and meaningful experiments. The book presents a review of the subject required to build up models as well as to design experiments. Emphasis is placed on the effect of physical and chemical texturing and their effect on the bulk transport phenomena. Application of the model to metal vapor condensation is of special interest. The unique behavior of liquid metals, with their low Prandtl number and high surface tension, is also discussed. The model predicts instantaneous drop size distribution for a given level of substrate subcooling and derives local as well as spatio-temporally averaged heat transfer rates and wall shear stress.

I welcome the opportunity to have my book translated, because of the great emphasis on two-phase flow and heat transfer in the English-speaking world, as related to research, university education, and industrial practice. The 1988 Springer-Verlag edition of "Warmeiibergang beim Kondensieren und beim Sieden" has been enlarged to include additional material on falling film evaporation (Chapter 12) and pressure drop in two-phase flow (Chapter 13). Minor errors in the original text have also been corrected. I would like to express my sincere appreciation to Professor Green, Asso ciate Professor of German at Rensselaer, for his excellent translation and co operation. My thanks go also to Professor Bergles for his close attention to technical and linguistic details. He carefully read the typescript and made many comments and suggestions that helped to improve the manuscript. I hope that the English edition will meet with' a favorable reception and contribute to better understanding and to progress in the field of heat transfer in condensation and boiling. February 1992 K. Stephan Preface to the German-Language Edition This book is a continuation of the series "Heat and Mass Transfer" edited by U. Grigull, in which three volumes have already been published. Its aim is to acquaint students and practicing engineers with heat transfer during condensa tion and boiling, and is intended primarily for students and engineers in mechanical, chemical, electrical, and industrial processing engineering.

Heat transfer enhancement in single-phase and two-phase flow heat exchangers in important in such industrial applications as power generating plant, process and chemical industry, heating, ventilation, air conditioning and refrigeration systems, and the cooling of electronic equipment. Energy savings are of primary importance in the design of such systems, leading to more efficient, environmentally friendly devices. This book provides invaluable information for such purposes.

Heat Transfer Enhancement in Chemical Processes combines process technologies with heat exchange equipment to study heat transfer enhancement. The book provides guidance for the progress of process technologies and the application of enhanced heat transfer equipment. It analyzes the basic principles of heat transfer and summarizes the theories and methods of heat transfer enhancement, while also focusing on three representative processes in petrochemical industry, including oil refining, aromatics, and ethylene production. The book summarizes in a systematical way the practical application of heat transfer enhancement in the petrochemical industry, from the equipment components, the processes, and the whole plant. - Puts theory into practice, providing guidance for the application of scientific research achievements - Integrates process technologies with process intensification, providing guidance for process flow enhancement - Combines process with equipment, introducing heat transfer enhancement technologies suitable for different processes - Covers the oil refining unit, aromatics unit, the ethylene plant and its downstream units

The Surface Wettability Effect on Phase Change collects high level contributions from internationally recognised scientists in the field. It thoroughly explores surface wettability, with topics spanning from the physics of phase change, physics of nucleation, mesoscale modeling, analysis of phenomena such drop evaporation, boiling, local heat flux at triple line, Leidenfrost, dropwise condensation, heat transfer enhancement, freezing, icing. All the topics are treated by discussing experimental results, mathematical modeling and numerical simulations. In particular, the numerical methods look at direct numerical simulations in the framework of VOF simulations, phase-field simulations and molecular dynamics. An introduction to equilibrium and non-equilibrium thermodynamics of phase change, wetting phenomena, liquid interfaces, numerical simulation of wetting phenomena and phase change is offered for readers who are less familiar in the field. This book will be of interest to researchers, academics, engineers, and postgraduate students working in the area of thermofluids, thermal management, and surface technology.

Nanofluids are gaining the attention of scientists and researchers around the world. This new category of heat transfer medium improves the thermal conductivity of fluid by suspending small solid particles within it and offers the possibility of increased heat transfer in a variety of applications. Bringing together expert contributions from

Provides a comprehensive coverage of the basic phenomena. It contains twenty-five chapters which cover different aspects of boiling and condensation. First the specific topic or phenomenon is described, followed by a brief survey of previous work, a phenomenological model based on current understanding, and finally a set of recommended design equa