This book presents a general view on thin surface coatings used for tribological applications and it is based on the current state of understanding. The mechanisms of friction and wear in sliding and rolling contacts of coated surfaces are described. Basic information on coating techniques, tribology and surface mechanisms is given. Based on collected experimental works information is given on the properties of thin soft coatings, such as polymer, lamellar solid and soft metal coatings; thin hard coatings, such as nitride, carbide, oxide, boride and diamond and diamond-like coatings; and multi-component and multi-layer coatings. The influence of interface layers and lubricants is highlighted. The methods available for characterization of coated surfaces and for mechanical and chemical evaluation of their tribological properties are described. Tribological evaluation methods for accelerated and field testing and the need for standardization of quality assurance procedures are discussed. A methodology for the selection of thin coatings for tribological applications is presented and knowledge based expert system approaches for coating selection are reviewed. For different application examples, the basic tribological contact mechanisms are described and the possibilities for improving their tribological properties by using surface coatings are discussed. The application examples include sliding and rolling bearings, gears, tools for cutting and forming, erosion resistant applications, magnetic recording systems and bio-medical implants.

Hardbound. This book presents a general view on thin surface coatings used for tribological applications and it is based on the current state of understanding. The mechanisms of friction and wear in sliding and rolling contacts of coated surfaces are described. Basic information on coating techniques, tribology and surface mechanisms is given. Based on collected experimental works information is given on the properties of thin soft coatings, such as polymer, lamellar solid and soft metal coatings; thin hard coatings, such as nitride, carbide, oxide, boride and diamond and diamond-like coatings; and multi-component and multi-layer coatings. The influence of interface layers and lubricants is highlighted. The methods available for characterization of coated surfaces and for mechanical and chemical evaluation of their tribological properties are described. Tribological evaluation methods for accelerated and field testing and the need for standardization of q

The surface coating field is a rapidly developing area of science and technology that offers new methods and techniques to control friction and wear. New coating types are continually being developed and the potential applications in different industrial fields are ever growing, ranging from machine components and consumer products to medical instruments and prostheses. This book provides an extensive review of the latest technology in the field, addressing techniques such as physical and chemical vapour deposition, the tribological properties of coatings, and coating characterization and performance evaluation techniques. Eleven different cases are examined in close detail to demonstrate the improvement of tribological properties and a guide to selecting coatings is also provided. This second edition is still the only monograph in the field to give a holistic view of the subject and presents all aspects, including test and performance data as well as insights into mechanisms and interactions, thus providing the level of understanding vital for the practical application of coatings. * An extensive review of the latest developments in the field of surface coatings* Presents both theory and practical applications* Includes a guide for selecting coatings

Applications of composite materials and composite coatings have been increasing in the field of automobile and aerospace industries due to the versatility in their properties. Present book comprehensively reviews the composite materials and coatings with a focus on the mechanical and tribology applications. It covers type of fibres (natural and synthetic), reinforcements and their selection, matrix, and technologies used to produce composite materials. Various sections cover basics and associated failures of composites, strengthening mechanisms and background theories, composite manufacturing technologies, mechanical and tribology properties of past and currently used composites. Features:- Covers different types of fibers, reinforcements, matrix, and technologies used to produce composite materials. Details the tribology behavior of different novel composite coatings fabricated using different coating techniques. Reviews research on wear behavior of composite materials and coatings. Discusses reinforcement behavior with respect to the different processing routes. Illustrates rule of mixtures, failures, theories behind the strengthening mechanism. This book aims at professionals, graduate students and researchers in mechanical engineering, design engineering, composite materials, composite coatings, tribology, automobile, and aircraft.

This book highlights some of the most important structural, chemical, mechanical and tribological characteristics of DLC films. It is particularly dedicated to the fundamental tribological issues that impact the performance and durability of these coatings. The book provides reliable and up-to-date information on available industrial DLC coatings and includes clear definitions and descriptions of various DLC films and their properties.

The last few decades have seen rapid development in the field of surface engineering and its applications in almost all industrial sectors. Tribological coatings, which are an important aspect of surface engineering, are today applied on machine component surfaces for a diverse range of moving machine components to control (mostly to minimize) friction and wear in order to conserve energy and materials. This reprint book is a compilation of 11 research papers contributed by experts in the field of surface engineering and tribology. These papers have dealt with the synthesis of various types of coatings, characterization and applications under different operating conditions. It is hoped that this reprint book will be of interest, not only to researchers, but also to practicing engineers and technologists in the industry.

Tribology of Polymeric Nanocomposites provides a comprehensive description of polymeric nanocomposites, both as bulk materials and as thin surface coatings, and provides rare, focused coverage of their tribological behavior and potential use in tribological applications. Providing engineers and designers with the preparation techniques, friction and wear mechanisms, property information and evaluation methodology needed to select the right polymeric nanocomposites for the job, this unique book also includes valuable real-world examples of polymeric nanocomposites in action in tribological applications. - Provides a complete reference to polmer nanocomposite material use in tribology from preparation through to selection and use - Explains the theory through examples of real-world applications, keeping this high-level topic practical and accessible - Includes contributions from more than 20 international tribology experts to offer broad yet detailed coverage of this fast-moving field

This handbook seeks to present authoritative coverage of tribology, including: physics of materials; an overview of soft, solid-lubricants and hard, wear-resistant coatings and their deposition techniques; and surface treatment techniques and the latest engineering specifications. It provides data, mostly in tabular form, on friction and wear characteristics of bulk materials, allowing the user to decide the appropriate course of action for selecting the proper coating material, as well as surface treatment techniques for maximum friction and wear reduction.

TRIBOLOGY AND CHARACTERIZATION OF SURFACE COATINGS The book provides updated information on the friction and wear behavior of coatings used in various industrial applications. Surface modification is a cost-effective process of increasing the life of components so that the whole device need not be changed if the surface is worn out. The tribological behavior of biological implants is currently an active topic and a thorough discussion is one of the book’s features. Tribology and Characterization of Surface Coatings explores key issues which are important in the research and development of surface coatings by providing updated information on friction and wear behavior of coatings used in different industrial applications. It covers the various coating deposition techniques, tribological response of nanocomposite coatings, multilayer hardfacing, and wear testing methods for coatings at nanoscale. The use of nanostructures may alter the tribological, characterization, and mechanical properties of the materials. Thermal spraying is the most widely used technique in industry for the deposition of coatings and their tribological properties need to be determined. This book also includes the recent trends in biotribology and the materials used in implants to counter the abrasive wear. Audience The book will serve as a reference to researchers, scientists, academicians, industrial engineers, and students who work in the fields of materials/polymer science and mechanical engineering. Apart from their applications to aerospace and electronics industries, the coatings are also used in the field of biomedical engineering.

As with the previous edition, the third edition of Engineering Tribology provides a thorough understanding of friction and wear using technologies such as lubrication and special materials. Tribology is a complex topic with its own terminology and specialized concepts, yet is vitally important throughout all engineering disciplines, including mechanical design, aerodynamics, fluid dynamics and biomedical engineering. This edition includes updated material on the hydrodynamic aspects of tribology as well as new advances in the field of biotribology, with a focus throughout on the engineering applications of tribology.This book offers an extensive range if illustrations which communicate the basic concepts of tribology in engineering better than text alone. All chapters include an extensive list of references and citations to facilitate further in-depth research and thorough navigation through particular subjects covered in each chapter. - Includes newly devised end-of-chapter problems - Provides a comprehensive overview of the mechanisms of wear, lubrication and friction in an accessible manner designed to aid non-specialists - Gives a reader-friendly approach to the subject using a graphic illustrative method to break down the typically complex problems associated with tribology