Written by an international expert, this book covers the processing, microstructure, and properties of cemented tungsten carbides. It is divided into 18 chapters covering wide areas from crystal structure to phase equilibria, production of metal and carbide powders, and much more. This book is ideal for researchers, plant engineers, and senior level students in metallurgical/mechanical/materials engineering who are interested in cemented carbides. There is no parallel book in print.

Cemented Tungsten Carbides deals with the materials science and technology of cemented tungsten carbides. It is the first book on the subject ever to be written in English. This book is aimed for a wide spectrum of readers including students, industry personnel, and researchers. With 160 figures and 47 tables, it amply demonstrates the ever-increasing significance of tungsten carbide based hard materials. Also included is an extensive list of up-to-date references available in the unclassified literature from worldwide sources.

Cemented Carbides describes all aspects related to the fabrication and examination of cemented carbides, starting from the production of raw materials and ending with final operations of surface finishing and coating. Basic phase diagrams of WC-based cemented carbides are presented and analyzed. Technological processes and equipment employed on different stages of the cemented carbide manufacture, including milling, granulation, pressing, sintering, surface finishing and deposing wear-resistant coatings are described, as well as modern techniques and instruments employed for controlling the microstructure and properties of cemented carbide. - Describes all aspects related to the fabrication and examination of cemented carbides, starting from the production of raw materials and ending with final operations of surface finishing and coating - Fills a gap in our current offerings surrounding the topic - Written by one of the top experts in the field, a former Russian scientist, allowing readers to tap into that country's wealth of knowledge on this topic

This volume contains the proceedings of the first International Conference on the Science of Hard Materials held in Moran, Wyoming, Aug. 23-28, 1981. The objective of the conference was to review and advance the state of knowledge of the basic physical and chemical properties of hard materials and show how these properties influence performance in a variety of applications. To this end, the 49 con tributed papers and the four keynote papers by Prof. Fischmeister and Drs. Hintermann, Exner and Almond, present an excellent overview of the state of the art in the "science" of hard materials. The contents of these proceedings also reflect the fact that hard metal technology is now well matured and several aspects of the behavior of these materials are well understood and firmly established. Structure-property relationships in this class of materials are currently well known. Pitfalls in some of the traditional test methods have been recognized and new test methods are being developed which discriminate between intrinsic material properties and flaw content and distribution. Application of fracture mechanics, al though a late corner to the hard materials area (as compared to other structural materials), is rapidly gaining acceptance and new fracture toughness test methods are being developed. Application of modern analysis and analytical techniques to these materials has begun and entirely new and unexpected information has been obtained. For a variety of reasons, "hard metals" have dominated the research and development scene of "hard materials".

Metal machining is the most widespread metal-shaping process in the mechanical manufacturing industry. World-wide investment in metal machining tools increases year on year - and the wealth of nations can be judged by it. This text - the most up-to-date in the field - provides in-depth discussion of the theory and application of metal machining at an advanced level. It begins with an overview of the development of metal machining and its role in the current industrial environment and continues with a discussion of the theory and practice of machining. The underlying mechanics are analysed in detail and there are extensive chapters examining applications through a discussion of simulation and process control. "Metal Machining: Theory and Applications" is essential reading for senior undergraduates and postgraduates specialising in cutting technology. It is also an invaluable reference tool for professional engineers. Professors Childs, Maekawa, Obikawa and Yamane are four of the leading authorities on metal machining and have worked together for many years.Of interest to all mechanical, manufacturing and materials engineersTheoretical and practical problems addressed

This book arose from a symposium titled 'Transition Metal Carbides and Nitrides: Preparation, Properties, and Reactivity' organized by Jae Sung Lee, Masatoshi Nagai and myself. The symposium was part of the 1995 Congress of Pacific Rim Chemical Societies, held in Honolulu, Hawaii between December 17-22, 1995. The meeting was the first major conference to exclusively address the theme of metal carbides and nitrides, and brought together many of the major researchers in the field. Over 50 scientists and engineers reported their latest findings in five sessions of presentations and discussions. The book closely follows the topics covered in the conference: Theory of bonding Structure and composition Catalytic properties Physical properties New methods of preparation Spectroscopy and microscopy The book is unique in its coverage. It provides a general introduction to the properties and nature of the materials, but also covers their latest applications in a wide variety of fields. It should thus be of interest to both experts and nonexperts in the fields of material science, solid-state chemistry, physics, ceramics engineering, and catalysis. The first chapter gives an overview, and many of the chapters provide summaries of advanced topics. All contributions were peer-reviewed.

"This book is an essential reference for achieving maximum productivity from machine tools when tuning the most commonly used grades of carbon, alloy, stainless, and tool steels. More specifically, its purpose is to provide recommendations for selecting machining parameters in relationship with cutting tool materials and workplace materials. Manufacturing engineers and managers, machine shop supervisors, machine tool operators, CNC programmers, and cutting tool engineers and designers will all find this book an invaluable aid as they search for ways to improve the efficiency of their operations."--BOOK JACKET.

Based on the sintering conference held at the Pennsylvania State University, USA, this text presents advances in the application of sintering to the most important industrial materials. It offers results on both solid-state and microphase sintering as well as microstructure evolution, and introduces new applications, processes, materials and solutions to technical problems.

Engineers rely on Groover because of the book’s quantitative and engineering-oriented approach that provides more equations and numerical problem exercises. The fourth edition introduces more modern topics, including new materials, processes and systems. End of chapter problems are also thoroughly revised to make the material more relevant. Several figures have been enhanced to significantly improve the quality of artwork. All of these changes will help engineers better understand the topic and how to apply it in the field.

Comprehensive Hard Materials, Three Volume Set deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds. Articles include the technologies of powder production (including their precursor materials), milling, granulation, cold and hot compaction, sintering, hot isostatic pressing, hot-pressing, injection moulding, as well as on the coating technologies for refractory metals, hard metals and hard materials. The characterization, testing, quality assurance and applications are also covered. Comprehensive Hard Materials provides meaningful insights on materials at the leading edge of technology. It aids continued research and development of these materials and as such it is a critical information resource to academics and industry professionals facing the technological challenges of the future. Hard materials operate at the leading edge of technology, and continued research and development of such materials is critical to meet the technological challenges of the future. Users of this work can improve their knowledge of basic principles and gain a better understanding of process/structure/property relationships. With the convergence of nanotechnology, coating techniques, and functionally graded materials to the cognitive science of cemented carbides, cermets, advanced ceramics, super-hard materials and composites, it is evident that the full potential of this class of materials is far from exhausted. This work unites these important areas of research and will provide useful insights to users through its extensive cross-referencing and thematic presentation. To link academic to industrial usage of hard materials and vice versa, this work deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds.