Focusing primarily on understanding the steady-state hydraulics that form the basis of hydraulic design and computer modelling applied in water distribution, Introduction to Urban Water Distribution elaborates the general principles and practices of water distribution in a straightforward way. The workshop problems and design exercise develop a temporal and spatial perception of the main hydraulic parameters in the system for given layout and demand scenarios. Furthermore, the book contains a detailed discussion of water demand, which is a fundamental element of any network analysis, and principles of network construction, operation, and maintenance. The attached CD contains all spreadsheet applications mentioned in the text, and the network model used in the design exercise. Written in a manner that is easily understood by those who know little about the subject, this introductory text will also benefit experts dealing with advanced problems who wish to refresh their knowledge.

Protecting and maintaining water distributions systems is crucial to ensuring high quality drinking water. Distribution systems-consisting of pipes, pumps, valves, storage tanks, reservoirs, meters, fittings, and other hydraulic appurtenances-carry drinking water from a centralized treatment plant or well supplies to consumers' taps. Spanning almost 1 million miles in the United States, distribution systems represent the vast majority of physical infrastructure for water supplies, and thus constitute the primary management challenge from both an operational and public health standpoint. Recent data on waterborne disease outbreaks suggest that distribution systems remain a source of contamination that has yet to be fully addressed. This report evaluates approaches for risk characterization and recent data, and it identifies a variety of strategies that could be considered to reduce the risks posed by water-quality deteriorating events in distribution systems. Particular attention is given to backflow events via cross connections, the potential for contamination of the distribution system during construction and repair activities, maintenance of storage facilities, and the role of premise plumbing in public health risk. The report also identifies advances in detection, monitoring and modeling, analytical methods, and research and development opportunities that will enable the water supply industry to further reduce risks associated with drinking water distribution systems.

This authoritative resource consolidates comprehensive information on the analysis and design of water supply systems into one practical, hands-on reference. After an introduction and explanation of the basic principles of pipe flows, it covers topics ranging from cost considerations to optimal water distribution design to various types of systems to writing water distribution programs. With numerous examples and closed-form design equations, this is the definitive reference for civil and environmental engineers, water supply managers and planners, and postgraduate students.

This new book and diskette provides detailed instructions on how to find and implement the lowest cost pipe combinations for water distribution systems. It also provides steady state and extended period simulation, as well as fundamentals of pipe sizing. This book and program (WADISO-Water Distribution Simulation and Sizing) are the only tools needed for solving pipe size based on cost. Written by experts at the water plant and the university, it's practical, easy-to-use, and a time-saver. All water utility personnel, water consultants, and university professors will find Water Distribution Systems to be invaluable.

Twort's Water Supply, Seventh Edition, has been expanded to provide the latest tools and techniques to meet engineering challenges over dwindling natural resources. Approximately 1.1 billion people in rural and peri-urban communities of developing countries do not have access to safe drinking water. The mortality from diarrhea-related diseases amounts to 2.2 million people each year from the consumption of unsafe water. This update reflects the latest WHO, European, UK, and US standards, including the European Water Framework Directive. The book also includes an expansion of waste and sludge disposal, including energy and sustainability, and new chapters on intakes, chemical storage, handling, and sampling. Written for both professionals and students, this book is essential reading for anyone working in water engineering. - Features expanded coverage of waste and sludge disposal to include energy use and sustainability - Includes a new chapter on intakes - Includes a new chapter on chemical storage and handling

This is a best practice manual for addressing water losses in water distribution networks worldwide. Systems and methodologies are presented for improving water loss and leakage management in a range of networks, from systems with a well-developed infrastructure to those in developing countries where the network may need to be upgraded. The key feature of the manual is a diagnostic approach to develop a water loss strategy - using the appropriate tools to find the right solutions - which can be applied to any network. The methods of assessing the scale and volume of water loss are outlined, together with the procedures for setting up leakage monitoring and detection systems. As well as real losses (leakage) procedures for addressing apparent losses, by introducing regulatory and customer metering policies are explained. Suggestions are made for demand management and water conservation programmes, to complement the water loss strategy. Recommendations are made for training workshops and operation and maintenance programmes to ensure skills transfer and sustainability. The manual is illustrated throughout with case studies. Losses in Water Distribution Networks will appeal to a wide range of practitioners responsible for designing and managing a water loss strategy. These include consultants, operations managers, engineers, technicians and operational staff. It will also be a valuable reference for senior managers and decision makers, who may require an overview of the principles and procedures for controlling losses. The book will also be suitable as a source document for courses in Water Engineering, Resource Management and Environmental Management.

This book provides a highly illustrated guide to the design, installation and maintenance of hot and cold water supply systems for domestic buildings. Based on British Standard BS 6700, the new edition takes into account revisions to the standard since the book was first published in 1991. It has also been updated to give guidance on the 1999 Water Supply Regulations and includes revisions to the Building Regulations. Written for designers and installers, this immensely practical book will also be of interest to technical staff of water undertakers, property services managers and students of NVQ and BTech courses. It was specially commissioned by the British Standards Institution and written for BSI by Bob Garrett, formerly of Langley College of Further Education and past President of the National Association of Plumbing Teachers.

Introductory technical guidance for civil and environmental engineers and other professional engineers and construction managers interested in design and construction of water supply systems. This is what is discussed: 1. DOMESTIC WATER DISTRIBUTION 2. DOMESTIC WATER TREATMENT 3. PUMPING STATIONS FOR WATER SUPPLY SYSTEMS 4. TREATED WATER STORAGE 5. WATER DESALINATION 6. WATER DISTRIBUTION IN COLD REGIONS 7. WATER DISTRIBUTION SYSTEM APPURTENANCES 8. WATER SAMPLING AND TESTING 9. WATER SUPPLY SOURCES 10. WATER SUPPLY SYSTEMS OPERATION AND MAINTENANCE 11. TREATMENT AND STORAGE IN COLD REGIONS 12. PUMPS OPERATION AND MAINTENANCE.

This book is open access under a CC BY-NC 4.0 license. This revised, updated textbook presents a systems approach to the planning, management, and operation of water resources infrastructure in the environment. Previously published in 2005 by UNESCO and Deltares (Delft Hydraulics at the time), this new edition, written again with contributions from Jery R. Stedinger, Jozef P. M. Dijkman, and Monique T. Villars, is aimed equally at students and professionals. It introduces readers to the concept of viewing issues involving water resources as a system of multiple interacting components and scales. It offers guidelines for initiating and carrying out water resource system planning and management projects. It introduces alternative optimization, simulation, and statistical methods useful for project identification, design, siting, operation and evaluation and for studying post-planning issues. The authors cover both basin-wide and urban water issues and present ways of identifying and evaluating alternatives for addressing multiple-purpose and multi-objective water quantity and quality management challenges. Reinforced with cases studies, exercises, and media supplements throughout, the text is ideal for upper-level undergraduate and graduate courses in water resource planning and management as well as for practicing planners and engineers in the field.