Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in design and construction of levees. Here is what is discussed: 1. FOUNDATION UNDERSEEPAGE, 2. SEEPAGE THROUGH EMBANKMENTS, 3. EMBANKMENT STABILITY, 4. METHODS OF ANALYSIS, 5. CONDITIONS REQUIRING ANALYSIS, 6. MINIMUM ACCEPTABLE FACTORS OF SAFETY, 7. MEASURES TO INCREASE STABILITY, 8. SURFACE SLIDES, 9. SETTLEMENT, 10. SETTLEMENT ANALYSIS.

Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in design and construction of levees. Here is what is discussed: 1. FIELD INVESTIGATIONS, 2. LEVEE CONSTRUCTION METHODS, 3. SEEPAGE, SLOPE AND SETTLEMENT, 4. BERMS, FILTERS AND DRAINS, 5. SOIL CEMENT FOR PROTECTION OF LEVEES, 6. SPECIAL FEATURES.

Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in planning, design and construction of levees for flood protection and water resources development projects. Here is what is discussed: 1. INTRODUCTION, 2. FIELD INVESTIGATIONS, 3. SUBSURFACE EXPLORATION, 4. FIELD TESTING, 5. LABORATORY TESTING.

Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in levee design and construction. Here is what is discussed: 1. PIPELINES AND OTHER UTILITY LINES CROSSING LEVEES, 2. GENERAL CONSIDERATIONS FOR PIPELINES CROSSING THROUGH OR UNDER LEVEES, 3. GENERAL CONSIDERATIONS FOR PIPELINES CROSSING OVER LEVEES, 4. PIPE SELECTION, 5. ANTISEEPAGE DEVICES, 6. CLOSURE DEVICES, 7. CAMBER, 8. INSTALLATION REQUIREMENTS, 9. ACCESS ROADS, 10. RAMPS, 11. LEVEE ENLARGEMENTS, 12. JUNCTION WITH CONCRETE CLOSURE STRUCTURES, 13. OTHER SPECIAL FEATURE.

Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in seepage and drainage control for land. Here is what is discussed: 1. INTRODUCTION, 2. HYDROLOGY, 3. HYDRAULICS, 4. EROSION CONTROL AND RIPRAP PROTECTION, 5. SUBSURFACE DRAINAGE.

Introductory technical guidance for civil engineers and construction managers interested in levee construction. Here is what is discussed: 1. LEVEE CONSTRUCTION METHODS, 2. FOUNDATION PREPARATION AND TREATMENT, 3. METHODS OF IMPROVING STABILITY, 4. EMBANKMENT CONSTRUCTION CONTROL, 5. EMBANKMENT ZONING, 6. PROTECTION OF RIVERSIDE SLOPES, 7. PIPELINES AND OTHER UTILITY LINES CROSSING LEVEES.

This manual presents fundamental principles underlying the design and construction of earth and rock-fill dams. The general principles presented herein are also applicable to the design and construction of earth levees.

Introductory technical guidance for civil and professional engineers and construction managers interested in design and construction of levees. Here is what is discussed: 1. FIELD INVESTIGATIONS 2. LEVEE CONSTRUCTION METHODS 3. SEEPAGE, SLOPE AND SETTLEMENT 4. BERMS, FILTERS AND DRAINS 5. SOIL CEMENT FOR PROTECTION OF LEVEE 6. SPECIAL FEATURES.

This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.