This report presents a cost analysis of a typical Aluminum Chloride production process from aluminum metal and chlorine. In the process, chlorine gas is passed through molten aluminum in ceramic-lined, tube-shaped reactors, producing Anhydrous Aluminum Chloride. This report was developed based essentially on the following reference(s): (1) "Aluminum Chloride", McKetta, J., Inorganic Chemicals Handbook. Vol. 1 (2) "Aluminum Compounds, Inorganic", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Aluminum Trichloride, Aluminum Scrap, Anhydrous Aluminum Chloride

This report presents a cost analysis of a typical Aluminium Chloride production process from aluminium metal and chlorine. In the process, chlorine gas is passed through molten aluminium powder in ceramic lined tube shaped reactors, producing Aluminium Chloride. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) Keywords: Aluminum Trichloride, Aluminium Scrap, Anhydrous Aluminium Chloride

This report presents a cost analysis of Vinyl Chloride production directly from ethane and chlorine. The process examined is similar to that developed by European Vinyls Corporation, now owned by INEOS. This process is still in its early development stage, but it has already been tested on a pilot scale plant. This report was developed based essentially on the following reference(s): Keywords: Chloroethene, 1,2-Dichloroethane, European Vinyls Corporation, EVC, INEOS, Ethane-To-VCM

This report presents a cost analysis of Phenethyl Alcohol production from benzene, ethylene oxide, and Aluminum chloride. In the process, benzene and ethylene oxide reacts in the presence of Aluminum trichloride, producing the Phenethyl Alcohol. This report was developed based essentially on the following reference(s): Keywords: 2-Phenylethanol, Phenylethyl Alcohol, Benzyl Carbinol

This report presents a cost analysis of Polyaluminum Chloride production from Aluminum hydroxide, sulfuric acid, hydrochloric acid, and calcium carbonate. In this process, Aluminum hydroxide is fed into the reactor containing sulfuric acid and hydrochloric acid. The solution obtained is neutralized with calcium carbonate resulting in a mixture of Polyaluminum Chloride and gypsum crystals. This report was developed based essentially on the following reference(s): Keywords: PAC, Poly-Aluminum Chloride

This report presents a cost analysis of a typical Aluminum Chloride production process from aluminum metal and chlorine In the process, chlorine gas is passed through molten aluminum in ceramic-lined, tube-shaped reactors, producing Anhydrous Aluminum Chloride. This report was developed based essentially on the following reference(s): (1) "Aluminum Chloride", McKetta, J., Inorganic Chemicals Handbook. Vol. 1 (2) "Aluminum Compounds, Inorganic", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Aluminum Trichloride, Aluminum Scrap, Anhydrous Aluminum Chloride

This monograph consists of manuscripts submitted by invited speakers who participated in the symposium "Industrial Environmental Chemistry: Waste Minimization in Industrial Processes and Remediation of Hazardous Waste," held March 24-26, 1992, at Texas A&M University. This meeting was the tenth annual international symposium sponsored by the Texas A&M Industry-University Cooperative Chemistry Program (IUCCP). The program was developed by an academic-industrial steering committee consisting of the co-chairmen, Professors Donald T. Sawyer and Arthur E. Martell of the Texas A&M University Chemistry Department, and members appointed by the sponsoring companies: Bernie A. Allen, Jr., Dow Chemical USA; Kirk W. Brown, Texas A&M University; Abraham Clearfield, Texas A&M University; Greg Leyes, Monsanto Company; Jay Warner, Hoechst-Celanese Corporation; Paul M. Zakriski, BF Goodrich Company; and Emile A. Schweikert, Texas A&M University (IUCCP Coordinator). The subject of this conference reflects the interest that has developed in academic institutions and industry for technological solutions to environmental contamination by industrial wastes. Progress is most likely with strategies that minimize waste production from industrial processes. Clearly the key to the protection and preservation of the environment will be through R&D that optimizes chemical processes to minimize or eliminate waste streams. Eleven of the papers are directed to waste minimization. An additional ten papers discuss chemical and biological remediation strategies for hazardous wastes that contaminate soils, sludges, and water.

Analytical methods used in the Geologic Division laboratories of the U.S. Geological Survey for the inorganic chemical analysis of rock and mineral samples.

The growth of renewable energy technologies, mainly wind and solar, demands the development of practical and economically viable energy storage technologies. This book explores the current state-of-the-art of large-scale energy storage and examines the likely environmental impacts of the main categories based on the types of energy stored.