Be prepared for drilling's hottest trend According to the U.S. Department of Energy, by 2005, 30% of all wells will be drilled using gas and air. The Air and Gas Drilling Manual, by William Lyons -- an internationally known expert and holder of nine drilling patents -- lays out everything you need to apply air and gas drilling to all kinds of operations, from the most basic to the most complex, and for the shallowest to the deepest. You’re shown how to: Master the air and gas drilling techniques in vital industries: construction and development of water wells, monitoring wells, geotechnical boreholes, mining operations boreholes, and more Calculate volumetric flow and compressor requirements. Drill with stable foam, unstable foam, and aerated liquids (as well as gas and air) Handle the special considerations of deep hole drilling Perform direct and reverse-flow circulation calculations Specify drills, collars, and casings Engineer and operate specialized downhole projects Plan operations and choose air package contractors

Air and Gas Drilling Manual, Fourth Edition: Applications for Oil, Gas and Geothermal Fluid Recovery Wells, and Specialized Construction Boreholes, and the History and Advent of the Directional DTH delivers the fundamentals and current methods needed for engineers and managers engaged in drilling operations. Packed with updates, this reference discusses the engineering modelling and planning aspects of underbalanced drilling, the impacts of technological advances in high angle and horizontal drilling, and the importance of new production from shale. in addition, an in-depth discussion is included on well control model planning considerations for completions, along with detailed calculation examples using Mathcad. This book will update the petroleum and drilling engineer with a much-needed reference to stay on top of drilling methods and new applications in today's operations. Provides key drilling concepts and applications, including unconventional activity and directional well by gas drilling Updated with new information and data on managed pressure drilling, foam drilling, and aerated fluid drilling Includes practical appendices with Mathcad equation solutions

The third edition of Air and Gas Drilling Manual describes the basic simulation models for drilling deep wells with air or gas drilling fluids, gasified two-phase drilling fluids, and stable foam drilling fluids. The models are the basis for the development of a systematic method for planning under balanced deep well drilling operations and for monitoring the drilling operation as well as construction project advances. Air and Gas Drilling Manual discusses both oil and natural gas industry applications, and geotechnical (water well, environmental, mining) industry applications. Important well construction and completion issues are discussed for all applications. The engineering analyses techniques are used to develop pre-operations planning methods, troubleshooting operations monitoring techniques and overall operations risk analysis. The essential objective of the book is drilling and well construction cost management control. The book is in both SI and British Imperial units. - Master the air and gas drilling techniques in construction and development of water wells, monitoring wells, geotechnical boreholes, mining operations boreholes and more - 30% of all wells drilled use gas and air, according to the U.S. Department of Energy estimates - Contains basic simulation equations with examples for direct and reverse circulation drilling models and examples for air and gas, gasified fluids, and stable foam drilling models

Air and Gas Drilling Manual, Fourth Edition: Applications for Oil, Gas and Geothermal Fluid Recovery Wells, and Specialized Construction Boreholes, and the History and Advent of the Directional DTH delivers the fundamentals and current methods needed for engineers and managers engaged in drilling operations. Packed with updates, this reference discusses the engineering modelling and planning aspects of underbalanced drilling, the impacts of technological advances in high angle and horizontal drilling, and the importance of new production from shale. in addition, an in-depth discussion is included on well control model planning considerations for completions, along with detailed calculation examples using Mathcad. This book will update the petroleum and drilling engineer with a much-needed reference to stay on top of drilling methods and new applications in today's operations. - Provides key drilling concepts and applications, including unconventional activity and directional well by gas drilling - Updated with new information and data on managed pressure drilling, foam drilling, and aerated fluid drilling - Includes practical appendices with Mathcad equation solutions

This book is written as a practical reference for engineers and earth scientists who are engaged in planning and carrying out deep air and gas drilling operations. The book covers air (or gas) drilling fluids, aerated (gasified) drilling fluids, and foam drilling. Further, from the mechanical rock destruction standpoint, the book covers conventional rotary drilling, downhole positive displacement motor (PDM) drilling, and down-the-hole hammer (DTH) drilling. The entire engineering material in both the USCS and SI unit systems, including the important equations used for air (or gas) drilling and aerated (gasified) drilling, along with the foam drilling calculations. Solutions based on these equations are given in MathCad, using both USCS and SI units.

An Invaluable Reference for Members of the Drilling Industry, from Owner–Operators to Large Contractors, and Anyone Interested In Drilling Developed by one of the world’s leading authorities on drilling technology, the fifth edition of The Drilling Manual draws on industry expertise to provide the latest drilling methods, safety, risk management, and management practices, and protocols. Utilizing state-of-the-art technology and techniques, this edition thoroughly updates the fourth edition and introduces entirely new topics. It includes new coverage on occupational health and safety, adds new sections on coal seam gas, sonic and coil tube drilling, sonic drilling, Dutch cone probing, in hole water or mud hammer drilling, pile top drilling, types of grouting, and improved sections on drilling equipment and maintenance. New sections on drilling applications include underground blast hole drilling, coal seam gas drilling (including well control), trenchless technology and geothermal drilling. It contains heavily illustrated chapters that clearly convey the material. This manual incorporates forward-thinking technology and details good industry practice for the following sectors of the drilling industry: Blast Hole Environmental Foundation/Construction Geotechnical Geothermal Mineral Exploration Mineral Production and Development Oil and Gas: On-shore Seismic Trenchless Technology Water Well The Drilling Manual, Fifth Edition provides you with the most thorough information about the "what," "how," and "why" of drilling. An ideal resource for drilling personnel, hydrologists, environmental engineers, and scientists interested in subsurface conditions, it covers drilling machinery, methods, applications, management, safety, geology, and other related issues.

Pre-Order now! Learn never-before published solutions to common drilling problems and discover how to continually improve efficiency during drilling. The "Drillers Knowledge Book" covers all aspects of drilling, including well design and construction, hydraulic optimization, rock mechanics, drilling fluid processing and much more. Between them, the two distinguished authors have more than a century of drilling experience. Publication anticipated by the end first quarter 2015. IADC.

Hydraulic Rig Technology and Operations delivers the full spectrum of topics critical to running a hydraulic rig. Also referred to as a snubbing unit, this single product covers all the specific specialties and knowledge needed to keep production going, from their history, to components and equipment. Also included are the practical calculations, uses, drilling examples, and technology used today. Supported by definitions, seal materials and shapes, and Q&A sections within chapters, this book gives drilling engineers the answers they need to effectively run and manage hydraulic rigs from anywhere in the world. - Presents the full range of hydraulic machinery in drilling engineering, including basic theory, calculations, definitions and name conventions - Helps readers gain practical knowledge on day-to-day operations, troubleshooting, and decision-making through real-life examples - Includes Q&A quizzes that help users test their knowledge

Used to clean the borehole, stabilize rock, control pressures, or enhance drilling rates, drilling fluids and their circulation systems are used in all phases of a drilling operation. These systems are highly dynamic and complicated to model until now. Written by an author with over 25 years of experience, Applied Drilling Circulation Systems: Hydraulics, Calculations and Models provide users with the necessary analytical/numerical models to handle problems associated with the design and optimization of cost-effective drilling circulation systems. The only book which combines system modeling, design, and equipment, Applied Drilling Circulation Systems: Hydraulics, Calculations and Models provides a clear and rigorous exposition of traditional and non-traditional circulation systems and equipment followed by self contained chapters concerning system modelling applications. Theories are illustrated by case studies based on the author's real life experience. The book is accompanied by a website which permits readers to construct, validate, and run models employing Newtonian fluids, Bingham Plastic fluids, Power Law fluids, and aerated fluids principles. This combination book and website arrangement will prove particularly useful to drilling and production engineers who need to plan operations including pipe-tripping, running-in casing, and cementing. - In-depth coverage of both on- and offshore drilling hydraulics. - Methods for optimizing both on- and offshore drilling hydraulics. - Contains problems and solutions based on years of experience.