This book reports on cutting-edge findings concerning characterization of material behavior, material modeling and simulation, and applications in the field of manufacturing. Based on the second International Conference on Advanced Materials Mechanics & Manufacturing, A3M2018, organized by the Laboratory of Mechanics, Modeling and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia, the book covers a variety of topics, such as experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. It offers a timely snapshot on current research and applications, offering a bridge to facilitate communication and collaboration between academic and industrial researchers.

Four decades ago, J.P. Den Hartog, then Professor of Mechanical Engineering at Massachusetts Institute of Technology, wrote Strength of Materials, an elementary text that still enjoys great popularity in engineering schools throughout the world. Widely used as a classroom resource, it has also become a favorite reference and refresher on the subject among engineers everywhere. This is the first paperback edition of an equally successful text by this highly respected engineer and author. Advanced Strength of Materials takes this important subject into areas of greater difficulty, masterfully bridging its elementary aspects and its most formidable advanced reaches. The book reflects Den Hartog's impressive talent for making lively, discursive and often witty presentations of his subject, and his unique ability to combine the scholarly insight of a distinguished scientist with the practical, problem-solving orientation of an experienced industrial engineer. The concepts here explored in depth include torsion, rotating disks, membrane stresses in shells, bending of flat plates, beams on elastic foundation, the two-dimensional theory of elasticity, the energy method and buckling. The presentation is aimed at the student who has a one-semester course in elementary strength of materials. The book includes an especially thorough and valuable section of problems and answers which give both students and professionals practice in techniques and clear illustrations of applications.

This book reports on innovative materials research with a special emphasis on methods, modeling, and simulation tools for analyzing material behavior, emerging materials, and composites, and their applications in the field of manufacturing. Chapters are based on contributions to the third International Conference on Advanced Materials Mechanics and Manufacturing, A3M2021, organized by the Laboratory of Mechanics, Modeling, and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia and held online on March 25-27, 2021. They cover a variety of topics, spanning from experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. Offering a good balance of fundamental research and industrially relevant findings, they provide researchers and professionals with a timely snapshot of and extensive information on current developments in the field and a source of inspiration for future research and collaboration.

This book discusses advanced materials and manufacturing processes with insights and overviews on tribology, automation, mechanical, biomedical, and aerospace engineering, as well as the optimization of industrial applications. The book explores the different types of composite materials while reporting on the design considerations and applications of each. Offering an overview of futuristic research areas, the book examines various engineering optimization and multi-criteria decision-making techniques and introduces a specific control framework used in analyzing processes. The book includes problem analyses and solving skills and covers different types of composite materials, their design considerations, and applications. This book is an informational resource for advanced undergraduate and graduate students, researchers, scholars, and field professionals, providing an update on the current advancements in the field of manufacturing processes.

This book reports on recent findings and applications relating to structure modeling and computation, design methodology, advanced manufacturing, mechanical behavior of materials, fluid mechanics, energy, and heat transfer. Further, it highlights cutting-edge issues in biomechanics and mechanobiology, and describes simulation and intelligent techniques applied to the control of industrial processes. Chapters are based on a selection of original peer-reviewed papers presented at the 5th International Tunisian Congress on Mechanics, COTUME, which was held on March 22–24, 2021, from Hammamet, Tunisia, in hybrid format. All in all, the book offers a good balance of fundamental research and industrially relevant applications, and an in-depth analysis of the current state of the art and challenges in various subfields of mechanical engineering; it provides researchers and professionals with a timely snapshot and a source of inspiration for future research and collaborations.

This book covers historical aspects and future directions of mechanical and industrial engineering. Chapters of this book include applied mechanics and design, tribology, machining, additive manufacturing and management of industrial technologies.

New materials enable advances in engineering design. This book describes a procedure for material selection in mechanical design, allowing the most suitable materials for a given application to be identified from the full range of materials and section shapes available. A novel approach is adopted not found elsewhere. Materials are introduced through their properties; materials selection charts (a new development) capture the important features of all materials, allowing rapid retrieval of information and application of selection techniques. Merit indices, combined with charts, allow optimisation of the materials selection process. Sources of material property data are reviewed and approaches to their use are given. Material processing and its influence on the design are discussed. The book closes with chapters on aesthetics and industrial design. Case studies are developed as a method of illustrating the procedure and as a way of developing the ideas further.

This book reports on cutting-edge research in the broad fields of mechanical engineering and mechanics. It describes innovative applications and research findings in applied and fluid mechanics, design and manufacturing, thermal science and materials. A number of industrially relevant recent advances are also highlighted. All papers were carefully selected from contributions presented at the International Conference on Advances in Mechanical Engineering and Mechanics, ICAMEM2019, held on December 16–18, 2019, in Hammamet, Tunisia, and organized by the Laboratory of Electromechanical Systems (LASEM) at the National School of Engineers of Sfax (ENIS) and the Tunisian Scientific Society (TSS), in collaboration with a number of higher education and research institutions in and outside Tunisia.

International Conference on Advanced Materials, Processing and Testing Technology (AMPTT 2019) Selected, peer reviewed papers from the International Conference on Advanced Materials, Processing and Testing Technology (AMPTT 2019), May 17-18, 2019, Guangzhou, China

Composite materials have been representing most significant breakthroughs in various industrial applications, particularly in aerospace structures, during the past thirty five years. The primary goal of Advanced Mechanics of Composite Materials is the combined presentation of advanced mechanics, manufacturing technology, and analysis of composite materials. This approach lets the engineer take into account the essential mechanical properties of the material itself and special features of practical implementation, including manufacturing technology, experimental results, and design characteristics. Giving complete coverage of the topic: from basics and fundamentals to the advanced analysis including practical design and engineering applications. At the same time including a detailed and comprehensive coverage of the contemporary theoretical models at the micro- and macro- levels of material structure, practical methods and approaches, experimental results, and optimisation of composite material properties and component performance. The authors present the results of more than 30 year practical experience in the field of design and analysis of composite materials and structures. * Eight chapters progressively covering all structural levels of composite materials from their components through elementary plies and layers to laminates* Detailed presentation of advanced mechanics of composite materials * Emphasis on nonlinear material models (elasticity, plasticity, creep) and structural nonlinearity