Protecting and maintaining water distributions systems is crucial to ensuring high quality drinking water. Distribution systems-consisting of pipes, pumps, valves, storage tanks, reservoirs, meters, fittings, and other hydraulic appurtenances-carry drinking water from a centralized treatment plant or well supplies to consumers' taps. Spanning almost 1 million miles in the United States, distribution systems represent the vast majority of physical infrastructure for water supplies, and thus constitute the primary management challenge from both an operational and public health standpoint. Recent data on waterborne disease outbreaks suggest that distribution systems remain a source of contamination that has yet to be fully addressed. This report evaluates approaches for risk characterization and recent data, and it identifies a variety of strategies that could be considered to reduce the risks posed by water-quality deteriorating events in distribution systems. Particular attention is given to backflow events via cross connections, the potential for contamination of the distribution system during construction and repair activities, maintenance of storage facilities, and the role of premise plumbing in public health risk. The report also identifies advances in detection, monitoring and modeling, analytical methods, and research and development opportunities that will enable the water supply industry to further reduce risks associated with drinking water distribution systems.

To keep drinking water safe involves more than following the letter of the law. This book introduces a comprehensive perspective and a proactive step-by-step approach to maintaining drinking water quality in distribution systems, and aids in delivering verifiably safe and economical water to end users. This second edition is updated throughout, and reflects the latest processes for improving drinking water quality in water systems and bringing those systems into compliance with the Lead and Copper Rule, the Disinfection By-Products Rule, and the Total Coliform Rule. It also presents the latest techniques for calming discolored water issues, keeping microbiological growth and biofilm formation in check, and preventing the formation of pinhole leaks in copper pipes. The book also aids in determining side effects of treatment chemicals, achieving simultaneous compliance with multiple regulations, and optimizing treatment chemical dosages.¿ A typical water distribution system is complex and chaotic with varying piping configurations, water flows, chemical reactions, and microbiological activity. It is, therefore, no surprise that monitoring and assessing water quality can be a daunting task. Water Distribution System Monitoring: A Practical Approach for Evaluating Drinking Water Quality simplifies this task by providing the tools for well-defined and measurable control of water quality.

Hidden problems, buried deep in the pipe networks of water distribution systems, are very serious potential threats to water quality. Microbial Quality of Water Supply in Distribution Systems outlines the processes and issues related to the degradation of water quality upon passage through networks of pipes, storage reservoirs, and standpipes on its way to the consumer. The risks associated with biofilm accumulation, bacteria, and other contaminants are discussed in great detail. In addition to its excellent microbiological coverage of organisms in drinking water and biofilms in distribution systems, Microbial Quality of Water Supply in Distribution Systems provides clear treatments of the technical and public communication issues most commonly affecting the quality of water and water supply systems. The inclusion of numerous case histories in this new book makes it a complete reference source for anyone concerned with water quality and water distribution systems.

"Drinking Water: Quality Control, Distribution Systems and Treatment focuses on some of the technologies involved in water treatment processes, such as adsorption, co-precipitation, flocculation, and coagulation. The authors emphasize the newest easy processes, inadequacies, and prospects of drinking water treatment. In one study, a simple effective intervention for biochanin A in influent water using ZSM-5, a nano-porous crystalline zeolite, is described. In closing, a Sphingomonas paucimobilis strain isolated from an Indian drinking water system was evaluated for its ability to co-aggregate and form mixed biofilms with Salmonella typhimurium, Shigella flexneri, and Escherichia coli O57:H7"

The quality of drinking water is paramount for public health. Despite important improvements in the last decades, access to safe drinking water is not universal. The World Health Organization estimates that almost 10% of the population in the world do not have access to improved drinking water sources. Among other diseases, waterborne infections cause diarrhea, which kills nearly one million people every year, mostly children under 5 years of age. On the other hand, chemical pollution is a concern in high-income countries and an increasing problem in low- and middle-income countries. Exposure to chemicals in drinking water may lead to a range of chronic non-communicable diseases (e.g., cancer, cardiovascular disease), adverse reproductive outcomes, and effects on children’s health (e.g., neurodevelopment), among other health effects. Although drinking water quality is regulated and monitored in many countries, increasing knowledge leads to the need for reviewing standards and guidelines on a nearly permanent basis, both for regulated and newly identified contaminants. Drinking water standards are mostly based on animal toxicity data, and more robust epidemiologic studies with accurate exposure assessment are needed. The current risk assessment paradigm dealing mostly with one-by-one chemicals dismisses the potential synergisms or interactions from exposures to mixtures of contaminants, particularly at the low-exposure range. Thus, evidence is needed on exposure and health effects of mixtures of contaminants in drinking water. Finally, water stress and water quality problems are expected to increase in the coming years due to climate change and increasing water demand by population growth, and new evidence is needed to design appropriate adaptation policies. This Special Issue of International Journal of Environmental Research and Public Health (IJERPH) focuses on the current state of knowledge on the links between drinking water quality and human health.

"Well-written and informative." --Richard Lewis, Lewis Information Systems "This [book] combines information which could possibly haverequired as many as four reference sources in the past." --Steven C. Messer In its first edition, John De Zuane's popular reference drewwide praise for being an insightful theoretical resource. Now, inthe second edition of Handbook of Drinking Water Quality, DeZuane builds on that legacy with the same practical and conceptualemphases, adding a wealth of new information that providesimmediate access to the data and guidelines needed to * understand the impact of drinking water parameters on publichealth * help build and operate water supply facilities * conduct reliable drinking water sampling, monitoring, andanalytical evaluation * implement potability standards from the source to the treatmentfacility, to storage, to the tap * write new standards and expand/modify existing standards asquickly as needed Preventing contamination of drinking water requires amultidisciplinary perspective, one that incorporates elements ofbacteriology, chemistry, physics, engineering, public health,preventive medicine, and control and evaluation management. In aconcise, easy-to-use format, Handbook of Drinking WaterQuality, Second Edition, describes * Data and guidelines from the World Health Organization and theEuropean Community used to develop drinking water standards * U.S. drinking water standards--their physical, chemical,microbiological, and radionuclide parameters and monitoringrequirements * EPA-approved analytical methods and the most effectivetreatment technologies for each contaminant * Critical concepts of water quality control as applied in watertreatment in conventional or chemical treatment plants * Disinfection and fluoridation requirements * Common problems with water distribution systems, including deadends, sediments, bacterial growth, insufficient pressure, and mainbreaks To keep pace with recent breakthroughs in scientific research,water analysis, and program implementation and monitoring, thisSecond Edition features expanded and updated informationon * All drinking water regulations issued since the previousedition in 1990 * Current drinking water standards adopted by the EuropeanCommunity * Lead poisoning, radon, and Cryptosporidium * Compulsory water treatment for lead and copper * Coliform Rule compliance (disinfection and filtration) * Trihalomethane reduction with ozonation As a quick reference, handbook, and technical manual Handbookof Drinking Water Quality, Second Edition, is an essentialvolume for engineers, water supply and treatment personnel,environmental scientists, public health officials, or anyoneresponsible for assuring the safety of drinking water.

Expanding water reuse-the use of treated wastewater for beneficial purposes including irrigation, industrial uses, and drinking water augmentation-could significantly increase the nation's total available water resources. Water Reuse presents a portfolio of treatment options available to mitigate water quality issues in reclaimed water along with new analysis suggesting that the risk of exposure to certain microbial and chemical contaminants from drinking reclaimed water does not appear to be any higher than the risk experienced in at least some current drinking water treatment systems, and may be orders of magnitude lower. This report recommends adjustments to the federal regulatory framework that could enhance public health protection for both planned and unplanned (or de facto) reuse and increase public confidence in water reuse.

The reality of the post-September 11 situation forces the operators of water supply systems through the world to examine the security and safety of their systems, its vulnerability to intentional interference and sabotage with respect to quantity and quality of potable water. In assessing system vulnerability, there is an urgent need to develop emergency response plans providing ways and means for alternative water supply at the moment of system operation disruption, and system remediation and recovery after the attack. Security of Water Supply Systems: from Source to Tap presents the state-of-the art with a view to the future, conclusions from past experiences are highlighted and future developments are suggested in the field of drinking water safety.