Building Code Requirements and Specification for Masonry Structures contains two standards and their commentaries: Building Code Requirements for Masonry Structures designated as TMS 402-16 (and formerly designated as TMS 402/ACI 530/ASCE 5) and Specification for Masonry Structures designated as TMS 602-16 (and formerly designated as TMS 602/ACI 530.1/ASCE 6). These standards are produced by The Masonry's Society's Committee TMS 402/602 and were formerly developed through the joint sponsorship of The Masonry Society (TMS), the American Concrete Institute (ACI), and the Structural Engineering Institute of the American Society of Civil Engineers (SEI/ASCE) through the Masonry Standards Joint Committee (MSJC). In late 2013, ACI and ASCE relinquished their rights to these standards to TMS who has served as the lead sponsor of the Standards for a number of years. Since then, the Committee has operated solely under the sponsorship of The Masonry Society, and the Committee's name, and the names of the standards, were re-designated.The Code covers the design and construction of masonry structures while the Specification is concerned with minimum construction requirements for masonry in structures. Some of the topics covered in the Code are: definitions, contract documents; quality assurance; materials; placement of embedded items; analysis and design; strength and serviceability; flexural and axial loads; shear; details and development of reinforcement; walls; columns; pilasters; beams and lintels; seismic design requirements; glass unit masonry; veneers; and autoclaved aerated concrete masonry. An empirical design method and a prescriptive method applicable to buildings meeting specific location and construction criteria are also included. The Specification covers subjects such as quality assurance requirements for materials; the placing, bonding and anchoring of masonry; and the placement of grout and of reinforcement. This Specification is meant to be modified and referenced in the Project Manual. The Code is written as a legal document and the Specification as a master specification required by the Code. The commentaries present background details, committee considerations, and research data used to develop the Code and Specification. The Commentaries are not mandatory and are for information of the user only.

Copublished by American Concrete Institute, American Society of Civil Engineers, and The Masonry Institute Building Code Requirements for Masonry Structures and Specifications for Masonry Structures covers the design and construction of masonry structures. It is written in such form that it may be adopted by reference in a legally adopted building code. Among the subjects covered are: definitions, contract documents, quality assurance, materials, placement of embedded items, analysis and design, strength and serviceability, flexural and axial loads, shear, details and development of reinforcement, walls, columns, pilasters, beams and lintels, seismic design requirements, glass unit masonry, and veneers. An empirical design method applicable to buildings meeting specific location and construction criteria are also included.

A Complete Guide to Masonry Materials and Structural Design Written by the former chair of the Masonry Standards Joint Committee (MSJC), this authoritative volume covers the design of masonry structures using the 2009 International Building Code and the 2008 MSJC Code and Specification. Masonry Structural Design emphasizes the strength design of masonry and includes allowable-stress provisions. Innovations such as autoclaved aerated concrete masonry (AAC) are also discussed. Real-world case studies featuring a low-rise building with reinforced concrete masonry and a four-story building with clay masonry illustrate the techniques presented in this comprehensive resource. Coverage includes: Basic structural behavior and design of low-rise, bearing wall buildings Materials used in masonry construction Code basis for structural design of masonry buildings, including seismic design Introduction of MSJC treatment of structural design Strength design of reinforced and unreinforced masonry elements Allowable-stress design of reinforced and unreinforced masonry elements Comparison of design by the allowable-stress approach versus the strength approach Lateral load analysis of shear wall structure Design and detailing of floor and roof diaphragms

The Definitive Guide to Designing Reinforced Masonry Structures Fully updated to the 2009 International Building Code (2009 IBC) and the 2008 Masonry Standards Joint Committee (MSJC-08), Design of Reinforced Masonry Structures, second edition, presents the latest methods for designing strong, safe, and economical structures with reinforced masonry. The book is packed with more than 425 illustrations and a wealth of new, detailed examples. This state-of-the-art guide features strength design philosophy for reinforced masonry structures based on ASCE 7-05 design loads for wind and seismic design. Written by an internationally acclaimed author, this essential professional tool takes you step-by-step through the art, science, and engineering of reinforced masonry structures. COVERAGE INCLUDES: Masonry units and their applications Materials of masonry construction Flexural analysis and design Columns Walls under gravity and transverse loads Shear walls Retaining and subterranean walls General design and construction considerations Anchorage to masonry Design aids and tables

A concise guide to the structural design of low-rise buildings in cold-formed steel, reinforced masonry, and structural timber This practical reference discusses the types of low-rise building structural systems, outlines the design process, and explains how to determine structural loadings and load paths pertinent to low-rise buildings. Characteristics and properties of materials used in the construction of cold-formed steel, reinforced masonry, and structural timber buildings are described along with design requirements. The book also provides an overview of noncomposite and composite open-web joist floor systems. Design code requirements referenced by the 2009 International Building Code are used throughout. This is an ideal resource for structural engineering students, professionals, and those preparing for licensing examinations. Structural Design of Low-Rise Buildings in Cold-Formed Steel, Reinforced Masonry, and Structural Timber covers: Low-rise building systems Loads and load paths in low-rise buildings Design of cold-formed steel structures Structural design of reinforced masonry Design of structural timber Structural design with open-web joists

Originally published in 1926 [i.e. 1927] under title: Steel construction; title of 8th ed.: Manual of steel construction.

ROCK SOLID ADVICE FOR MASONRY PROS! Covering an unprecedented range of materials, technologies, and regulations, Masonry Design and Detailing is an essential resource for architects and masonry contractors. Completely updated, this hands-on guide features insight on the complete range of masonry topics: wall systems, unit and mortar selection, component detailing, building code compliance, and much, much more. Plus, you get discussions on a host of topical issues, including: * ASTM standards * MSJC Code (ACI 530) * International Building Code Requirements (New) * New drainage accessories * Residential foundation requirements (New) * Masonry bracing standards (New) * Barrier, drainage and rain screen walls (New) * Window flashing details (New) * More than 80 new illustrations * And much more! Detailed enough for the working professional -- and still appropriate for the apprentice -- Masonry Design and Detailing provides hundreds of illustrations to maximize your understanding of these critical issues. When it comes to quality masonry, this book should be at the foundation of your work.