This book contains the lectures, seminars and abstracts of short communications delivered at the above summer school. The talks are an updated account of the methods used in the detection of radioactivity in nature and in the study of its spread in the environment.

From the Introduction Low-level radioactivity is related to those radioactive sources of ionizing radiation that are characterized by low activities. Sometimes activity here does not represent total amount of radionuclides but rather their concentration. In other cases, the total activity may be quite high, but we can measure only a relatively small portion of the material. "Low" may have, for different situations and circumstances, not only considerably different meanings but also different absolute values as far as the activity or activity concentration is concerned. For example, one can refer to low activity in the case of radiocarbon dating, where the concentration of 14C is actually lower than its natural concentration, and also in the case of radon monitoring where, especially in mines or in some enclosed spaces, its concentration may be several thousand times higher than the outdoor "atural" concentrations. Emphasis is now being placed on the analysis of naturally occurring radionuclides in the environment or on the release of radionuclides from their different man-made sources because liquid and aerial discharge level controls have become more rigorous. In addition, the applicability of low-level methodology increases the extent of different radionuclide applications considerably. Since individual radionuclides differ in their decay scheme and particles emitted as well in their energies, there is no universal method for the accurate measurement of all radioactive sources. Moreover, there is usually a mixture of radionuclides in a sample, causing some difficulties in a selective evaluation of a given radionuclide. Due to the random nature of radioactive disintegrations, the appropriate interpretation of the experimental results would be, in most cases, impossible without elaborate statistical treatment and evaluation of the data obtained. Thanks to the availability of computer-based instrumentation, the measuring data can be, in most cases, processed and evaluated on-line, which makes it possible to control and optimize the experiment in order to extract the maximum amount of information carried by the detector response. The purpose of this book is to provide an introduction to low-level radioactivity assessment and to clarify the nature of its sources, as well as the principal methods used in its measurement. Our evaluation is concentrated on the present-day aspects of low-level methodology. The book may be useful for all who need highly sensitive analysis of natural or artificial radioactivity both within and outside the nuclear field. The attempt of this book is to summarize the sources of environmental radioactivity and their possible radiological impact in terms of resulting doses to the population, and to present a sound review of the measuring methods and techniques for the evaluation of low-level radioactivities encountered in both the environment and in a number of applications where radioactive sources are used as a means of obtaining important information.

This volume gives an up-to-date account of the methods used in the detection of artificial radionuclides and their spread in the environment.

Handbook of Radioactivity Analysis: Radiation Physics and Detectors, Volume One, and Radioanalytical Applications, Volume Two, Fourth Edition, constitute an authoritative reference on the principles, practical techniques and procedures for the accurate measurement of radioactivity - everything from the very low levels encountered in the environment, to higher levels measured in radioisotope research, clinical laboratories, biological sciences, radionuclide standardization, nuclear medicine, nuclear power, and fuel cycle facilities, and in the implementation of nuclear forensic analysis and nuclear safeguards. It includes sample preparation techniques for all types of matrices found in the environment, including soil, water, air, plant matter and animal tissue, and surface swipes.Users will find the latest advances in the applications of radioactivity analysis across various fields, including environmental monitoring, radiochemical standardization, high-resolution beta imaging, automated radiochemical separation, nuclear forensics, and more. - Spans two volumes, Radiation Physics and Detectors and Radioanalytical Applications - Includes a new chapter on the analysis of environmental radionuclides - Provides the latest advances in the applications of liquid and solid scintillation analysis, alpha- and gamma spectrometry, mass spectrometric analysis, Cherenkov counting, flow-cell radionuclide analysis, radionuclide standardization, aerosol analysis, high-resolution beta imaging techniques, analytical techniques in nuclear forensics, and nuclear safeguards - Describes the timesaving techniques of computer-controlled automatic separation and activity analysis of radionuclides - Provides an extensive table of the radiation characteristics of most radionuclides of interest for the radioanalytical chemist

This textbook presents the principles and methods for the measurement of radioactivity in the environment. In this regard, specific low-level radiation counting and spectrometry or mass spectrometry techniques are discussed, including sources, distribution, levels and dynamics of radioactivity in nature. The author gives an accurate description of the fundamental concepts and laws of radioactivity as well as the different types of detectors and mass spectrometers needed for detection. Special attention is paid to scintillators, semiconductor detectors, and gas ionization detectors. In order to explain radiochemistry, some concepts about chemical separations are introduced as well. The book is meant for graduate and advanced undergraduate students in physics, chemistry or engineering oriented to environmental sciences, and to other disciplines where monitoring of the environment and its management is of great interest.

Reports NIST research and development in the physical and engineering sciences in which the Institute is active. These include physics, chemistry, engineering, mathematics, and computer sciences. Emphasis on measurement methodology and the basic technology underlying standardization.

This book is intended for scientists engaged in the measurement of weak alpha, beta, and gamma active samples; in health physics, environmental control, nuclear geophysics, tracer work, radiocarbon dating etc. It describes the underlying principles of radiation measurement and the detectors used. It also covers the sources of background, analyzes their effect on the detector and discusses economic ways to reduce the background. The most important types of low-level counting systems and the measurement of some of the more important radioisotopes are described here. In cases where more than one type can be used, the selection of the most suitable system is shown.

The authors have addressed the basic need for internationally consistent standards and methods demanded by the new and increasing use of radioactive materials, radiopharmaceuticals and labelled compounds. Particular emphasis is given to the basic and practical problems that may be encountered in measuring radioactivity. The text provides information and recommendations in the areas of radiation protection, focusing on quality control and the precautions necessary for the preparation and handling of radioactive substances. New information is also presented on the applications of both traditional and innovative instruments in the fields of diagnostic and clinical radiology, radiation protection, biomedical research, industrial and agricultural applications, power production and waste control.

Handbook of Radioactivity Analysis is written by experts in the measurement of radioactivity. The book describes the broad scope of analytical methods available and instructs the reader on how to select the proper technique. It is intended as a practical manual for research which requires the accurate measurement of radioactivity at all levels, from the low levels encountered in the environment to the high levels measured in radioisotope research. This book contains sample preparation procedures, recommendations on steps to follow, necessary calculations, computer controlled analysis, and high sample throughput techniques. Each chapter includes practical techniques for application to nuclear safety, nuclear safeguards, environmental analysis, weapons disarmament, and assays required for research in biomedicine and agriculture. The fundamentals of radioactivity properties, radionuclide decay, and methods of detection are included to provide the basis for a thorough understanding of the analytical procedures described in the book. Therefore, the Handbook can also be used as a teaching text. - Includes sample preparation techniques for matrices such as soil, air, plant, water, animal tissue, and surface swipes - Provides procedures and guidelines for the analysis of commonly encountered na

The Symposium on Nuclear Data Evaluation Methodology provided a forum for the discussion of developments made over the past 12 years in the evaluation methods used for generating data files for applied technology. With a program that was prepared by an international committee of experts in this field, this set of proceedings gives a comprehensive overview of the development and progress of this field for the last 12 years. It serves as an important source of reference and historical update for those seeking an in-depth understanding of this study.