This book provides the reader with: • a comprehensive description of engineering activities carried out on oil & gas projects, • a description of the work of each engineering discipline, including illustrations of all common documents, • an overall view of the plant design sequence and schedule, • practical tools to manage and control engineering activities. This book is designed to serve as a map to anyone involved with engineering activities. It enables the reader to get immediately oriented in any engineering development, to know which are the critical areas to monitor and the proven methods to apply. It will fulfill the needs of anyone wishing to improve engineering and project execution. Table des matières : 1. Project Engineering. 2. The Design Basis. 3. Process. 4. Equipment/Mechanical. 5. Plant Layout. 6. Safety & Environment. 7. Civil Engineering. 8. Materials & Corrosion. 9. Piping. 10. Plant Model. 11. Instrumentation and Control. 12. Electrical. 13. Off-Shore. 14. The Overall Work Process. 15. BASIC, FEED and Detail Design. 16. Matching the Project Schedule. 17. Engineering Management. 18. Methods & Tools. 19. Field Engineering. 20. Revamping.

This is a major new handbook that covers hundreds of subjects that cross numerous industry sectors; however, the handbook is heavily slanted to oil and gas environmental management, control and pollution prevention and energy efficient practices. Multi-media pollution technologies are covered : air, water, solid waste, energy. Students, technicians, practicing engineers, environmental engineers, environmental managers, chemical engineers, petroleum engineers, and environmental attorneys are all professionals who will benefit from this major new reference source. The handbook is organized in three parts. Part A provides an extensive compilation of abbreviations and concise glossary of pollution control and engineering terminology. More than 400 terms are defined. The section is intended to provide a simple look-up guide to confusing terminology used in the regulatory field, as well as industry jargon. Cross referencing between related definitions and acronyms are provided to assist the user. Part B provides physical properties and chemical safety information. This part is not intended to be exhaustive; however it does provide supplemental information that is useful to a number of the subject entries covered in the main body of the handbook. Part C is the Macropedia of Subjects. The part is organized as alphabetical subject entries for a wide range of pollution controls, technologies, pollution prevention practices and tools, computational methods for preparing emission estimates and emission inventories and much more. More than 100 articles have been prepared by the author, providing a concise overview of each subject, supplemented by sample calculation methods and examples where appropriate, and references. Subjects included are organized and presented in a macropedia format to assist a user in gaining an overview of the subject, guidance on performing certain calculations or estimates as in cases pertinent to preliminary sizing and selection of pollution controls or in preparing emissions inventories for reporting purposes, and recommended references materials and web sites for more in-depth information, data or computational tools. Each subject entry provides a working overview of the technology, practice, piece of equipment, regulation, or other relevant issue as it pertains to pollution control and management. Cross referencing between related subjects is included to assist the reader to gain as much of a practical level of knowledge.

"Gas Well Testing Handbook deals execusively with the theory and practice of gas well testing, including pressure transient analysis technique, analytical methods required to interpret well behavior, evaluating reservoir quality, reservoir simulation, and production forecasts. A highly practical volume, this book is written for drilling engineers, well logging engineers, reservoir engineers, engineering students, geologists, and geophysicists."--BOOK JACKET

The objective of this practical oil and gas piping handbook is to facilitate project management teams of oil and gas piping related construction projects to understand the key requirements of the discipline and to equip them with the necessary knowledge and protocol. It provides a comprehensive coverage on all the practical aspects of piping related material sourcing, fabrication essentials, welding related items, NDT activities, erection of pipes, pre-commissioning, commissioning, post-commissioning, project management and importance of ISO Management systems in oil and gas piping projects. This handbook assists contractors in ensuring the right understanding and application of protocols in the project. One of the key assets of this handbook is that the technical information and the format provided are practically from real time oil and gas piping projects; hence, the application of this information is expected to enhance the credibility of the contractors in the eyes of the clients and to some extent, simplify the existing operations. Another important highlight is that it holistically covers the stages from the raw material to project completion to handover and beyond. This will help the oil and gas piping contractors to train their project management staff to follow the best practices in the oil and gas industry. Furthermore, this piping handbook provides an important indication of the important project-related factors (hard factors) and organizational-related factors (soft factors) to achieve the desired project performance dimensions, such as timely completion, cost control, acceptable quality, safe execution and financial performance. Lastly, the role of ISO management systems, such as ISO 9001, ISO 14001 and OHSAS 18001 in construction projects is widely known across the industry; however, oil and gas specific ISO quality management systems, such as ISO 29001, and project specific management systems, such as ISO 21500, are not widely known in the industry, which are explained in detail in this handbook for the benefit of the oil and gas construction organizations. Features: Covering the stages from the raw material to project completion, to handover and beyond Providing practical guidelines to oil and gas piping contractors for training purposes and best practices in the oil and gas industry Emphasizing project-related factors (hard factors) and organizational-related factors (soft factors) with a view to achieve the desired project performance Highlighting the roles of ISO management systems in oil and gas projects.

In light of increasing economic and international threats, military operations must be examined with a critical eye in terms of process design, management, improvement, and control. Although the Pentagon and militaries around the world have utilized industrial engineering (IE) concepts to achieve this goal for decades, there has been no single reso