This is the first comprehensive book covering all aspects of the use of carbonaceous materials in heterogeneous catalysis. It covers the preparation and characterization of carbon supports and carbon-supported catalysts; carbon surface chemistry in catalysis; the description of catalytic, photo-catalytic, or electro-catalytic reactions, including the development of new carbon materials such as carbon xerogels, aerogels, or carbon nanotubes; and new carbon-based materials in catalytic or adsorption processes. This is a premier reference for carbon, inorganic, and physical chemists, materials scientists and engineers, chemical engineers, and others.

Adsorption by Carbons covers the most significant aspects of adsorption by carbons, attempting to fill the existing gap between the fields of adsorption and carbonaceous materials. Both basic and applied aspects are presented. The first section of the book introduces physical adsorption and carbonaceous materials, and is followed by a section concerning the fundamentals of adsorption by carbons. This leads to development of a series of theoretical concepts that serve as an introduction to the following section in which adsorption is mainly envisaged as a tool to characterize the porous texture and surface chemistry of carbons. Particular attention is paid to some novel nanocarbons, and the electrochemistry of adsorption by carbons is also addressed. Finally, several important technological applications of gas and liquid adsorption by carbons in areas such as environmental protection and energy storage constitute the last section of the book. - The first book to address the interplay between carbonaceous materials and adsorption - Includes important environmental applications, such as the removal of volatile organic compounds from polluted atmospheres - Covers both gas-solid and liquid-solid adsorption

Materials Science and Engineering of Carbon: Characterization discusses 12 characterization techniques, focusing on their application to carbon materials, including X-ray diffraction, X-ray small-angle scattering, transmission electron microscopy, Raman spectroscopy, scanning electron microscopy, image analysis, X-ray photoelectron spectroscopy, magnetoresistance, electrochemical performance, pore structure analysis, thermal analyses, and quantification of functional groups. Each contributor in the book has worked on carbon materials for many years, and their background and experience will provide guidance on the development and research of carbon materials and their further applications. - Focuses on characterization techniques for carbon materials - Authored by experts who are considered specialists in their respective techniques - Presents practical results on various carbon materials, including fault results, which will help readers understand the optimum conditions for the characterization of carbon materials

In recent years the Japanese have funded a comprehensive study of carbon materials which incorporate other elements including boron, nitrogen and fluorine, hence the title of the project "Carbon Alloys".Coined in 1992, the phrase "Carbon Alloys" can be applied to those materials mainly composed of carbon materials in multi-component systems. The carbon atoms of each component have a physical and/or chemical interactive relationship with other atoms or compounds. The carbon atoms of the components may have different hybrid bonding orbitals to create quite different carbon components.Eiichi Yasuda and his team consider the definition of Carbon Alloys, present the results of the Carbon Alloys projects, describe typical Carbon Alloys and their uses, discuss recent techniques for their characterization, and finally, illustrate potential applications and future developments for Carbon Alloy science. The book contains over thirty chapters on these studies from as many researchers.The most modern of techniques, particularly in the area of spectroscopy, were used as diagnostic tools, and many of these are applicable to pure carbons also. Porosity in carbons received considerable attention.

Recent years have seen an expansion in speciality uses of activated carbons including medicine, filtration, and the purification of liquids and gaseous media. Much of current research and information surrounding the nature and use of activated carbon is scattered throughout various literature, which has created the need for an up-to-date comprehensive and integrated review reference. In this book, special attention is paid to porosities in all forms of carbon, and to the modern-day materials which use activated carbons - including fibres, clothes, felts and monoliths. In addition, the use of activated carbon in its granular and powder forms to facilitate usage in liquid and gaseous media is explored. Activated Carbon will make essential reading for Material Scientists, Chemists and Engineers in academia and industry. - Characterization of porosity - The surface chemistry of the carbons - Methods of activation and mechanisms of adsorptio - Computer modelling of structure and porosity within carbons - Modern instrumental analytical methods

Introduction to Carbon Science deals with various aspects of carbon science, from polymer science and prosthetics to crystallography, carbonization, spectroscopy, and surface science. Topics covered include the mechanisms of formation of isotropic and anisotropic carbons, physical properties of pitch relevant to the fabrication of carbon materials; kinetics and catalysis of carbon gasification; and porosity in carbons and graphites. Carbon fibers, cokes and composites, and coal to coke transformations are also discussed. This book is comprised of nine chapters and begins with an overview of the basic structural features of carbon materials, along with definitions of the various carbon forms encountered in carbon science. The principal techniques for studying the structure of solid carbons are also considered. The reader is then introduced to the mechanisms underlying the formation of isotropic and anisotropic carbons; the physicochemical changes that take place when pitch is pyrolyzed to carbon; and kinetics and catalysis of carbon gasification reactions. The following chapters explore various types of porosity in carbons and graphites; manufacture, properties, structure, and applications of carbon fibers; and mechanical properties of cokes and composites. This text concludes by describing the conversion of coal to coke. This monograph will be of interest to carbon scientists, technologists, and engineers, as well as those entering the field of carbon science for the first time.

The discovery of fullerenes and nanotubes has greatly stimulated the interest of scientists and engineers in carbon materials, and has resulted in much scientific research. These materials have provided us with many interesting ideas and potential applications, some of them practical and some simply dreams for the future. In the early 1960s, carbon fibers, glass-like carbons and pyrolytic carbons were developed which were quite different from the carbon materials that had previously been used. Carbon fibers exhibited surprisingly good mechanical properties, glass-like carbons exhibited brittle fracture resulting in a conchoidal fracture surface similar to sodium glass, and giving no carbon dust, and pyrolytic carbons were produced by a new production process of chemical vapour deposition and showed very high anisotropy. These carbons materials made a great impact not only on the carbon community who had been working on carbon materials but also on people working in the fields of materials science and engineering. They were used to develop a variety of new applications in technological fields, such as semiconductors, microelectronics, aerospace and high temperature, etc. These newly developed carbon materials were called NEW CARBONS, in comparison with carbon materials such as artificial graphites represented by graphite electrodes, carbon blacks and activated carbons, which maybe thought of as CLASSICAL CARBONS. Later, other new carbons, such as activated carbons and those with novel functions, isotropic high-density graphites, intercalation compounds, various composites, etc., were developed. In 1994, Professor Michio Inagaki published a book entitled "New Carbon Materials — Structure and Functions" with his friend Professor Yoshihiro Hishiyama of Musashi Institute of Technology, published by Gihoudou Shuppan in Japanese. However, progress in the fields of these new carbons is so rapid that the previous book is already out of date. For this reason the author has decided to write an English text on New Carbons. The text focuses on New Carbons based on hexagonal networks of carbon-atoms, i.e. graphite-related materials. The fundamental concept underlying this book is that the structure and functions of these materials are principally governed by their texture. The aim is to give readers a comprehensive understanding of New Carbons through the description of their structure and texture, along with the properties that are largely dependent on them.

This book provides a detailed description of metal-complex functionalized carbon allotrope forms, including classic (such as graphite), rare (such as M- or T-carbon), and nanoforms (such as carbon nanotubes, nanodiamonds, etc.). Filling a void in the nanotechnology literature, the book presents chapters generalizing the synthesis, structure, properties, and applications of all known carbon allotropes. Metal-complex composites of carbons are described, along with several examples of their preparation and characterization, soluble metal-complex carbon composites, cost-benefit data, metal complexes as precursors of carbon allotropes, and applications. A lab manual on the synthesis and characterization of carbon allotropes and their metal-complex composites is included. Provides a complete description of all carbon allotropes, both classic and rare, as well as carbon nanostructures and their metal-complex composites; Contains a laboratory manual of experiments on the synthesis and characterization of metal-complex carbon composites; Discusses applications in diverse fields, such as catalysis on supporting materials, water treatment, sensors, drug delivery, and devices.

Char and Carbon Materials Derived from Biomass: Production, Characterization and Applications provides an overview of biomass char production methods (pyrolysis, hydrothermal carbonization, etc.), along with the characterization techniques typically used (Scanning Electronic Microscopy, X-Ray Fluorescence, Nitrogen adsorption, etc.) In addition, the book includes a discussion of the various properties of biomass chars and their suitable recovery processes, concluding with a demonstration of applications. As biomass can be converted to energy, biofuels and bioproducts via thermochemical conversion processes, such as combustion, pyrolysis and gasification, this book is ideal for professionals in energy production and storage fields, as well as professionals in waste treatment, gas treatment, and more. - Provides a discussion of sources of biomass feedstocks, such as agricultural, woody plants and food processing residue - Discusses the various production processes of biomass chars, including pyrolysis and hydrothermal carbonization - Explores various applications of biomass chars within different industries, including energy and agronomy

This study begins with a review of carbon materials, emphasizing structure and chemical bonding in various forms of carbon. It then goes on to discuss advanced technologies for the manufacture and modification of carbon-based materials and their practical applications.