This specification prescribes requirements for the classification of bare, wrought and cast aluminum-alloy electrodes and rods for use with the gas metal arc, gas tungsten arc, oxyfuel gas, and plasma arc welding processes.

This specification prescribes the requirements for classifications of copper and copper-alloy electrodes and rods for gas shielded metal arc, gas shielded tungsten arc, and plasma arc welding. Classification is based on chemical composition of the filler metal. Additional requirements are included for manufacture, sizes, lengths and packaging. A guide is appended to the specification as a source of information concerning the classification system employed and intended use of the electrodes. This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other.

This specification establishes the requirements for classification of carbon steel electrodes for shielded metal arc welding. The requirements include mechanical properties of weld metal, weld metal soundness, and usability of electrode. Requirements for composition of the weld metal, moisture content of low-hydrogen electrode coverings, standard sizes and lengths, marking, manufacturing, and packaging are all included. A guide to the use of the standard is included in an annex. Optional supplemental requirements include improved toughness and ductility, lower moisture contents, and diffusible hydrogen limits. This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other.

This specification prescribes the requirements for the classification of over 30 titanium and titanium-alloy welding electrodes and rods. Classification is based on the chemical composition of the electrode. Major topics include general requirements, testing, packaging, and application guidelines. This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other. This specification adopts the requirements of ISO 24034 and incorporates the provisions of earlier versions of A5.16/A5.16M, allowing for classifications under both specifications.