This handbook has been prepared as a working reference for the safety officer, the environmental engineer, and the consultant. For the safety officer, this handbook provides detailed guidelines and instructions in preparing Right-to-Know Reporting Audits, establishing programs and training employees on hazard awareness, and developing and implementing emergency response programs in the workplace and at off-site operations.For the environmental engineer, this handbook provides extensive technical data on toxic chemical properties and detailed instructional aid on how to properly prepare toxic chemical release inventory reporting.For the environmental consultant, an extensive overview of corrective action technologies is provided.

Complex environmental problems are often reduced to an inappropriate level of simplicity. While this book does not seek to present a comprehensive scientific and technical coverage of all aspects of the subject matter, it makes the issues, ideas, and language of environmental engineering accessible and understandable to the nontechnical reader.Improvements introduced in the fourth edition include a complete rewrite of the chapters dealing with risk assessment and ethics, the introduction of new theories of radiation damage, inclusion of environmental disasters like Chernobyl and Bhopal, and general updating of all the content, specifically that on radioactive waste.Since this book was first published in 1972, several generations of students have become environmentally aware and conscious of their responsibilities to the planet earth. Many of these environmental pioneers are now teaching in colleges and universities, and have in their classes students with the same sense of dedication and resolve that they themselves brought to the discipline. In those days, it was sometimes difficult to explain what indeed environmental science or engineering was, and why the development of these fields was so important to the future of the earth and to human civilization. Today there is no question that the human species has the capability of destroying its collective home, and that we have indeed taken major steps toward doing exactly that.And yet, while, a lot has changed in a generation, much has not. We still have air pollution; we still contaminate our water supplies; we still dispose of hazardous materials improperly; we still destroy natural habitats as if no other species mattered. And worst of all, we still continue to populate the earth at an alarming rate. There is still a need for this book, and for the college and university courses that use it as a text, and perhaps this need is more acute now than it was several decades ago. Although the battle to preserve the environment is still raging, some of the rules have changed. We now must take into account risk to humans, and be able to manipulate concepts of risk management. With increasing population, and fewer alternatives to waste disposal, this problem is intensified. Environmental laws have changed, and will no doubt continue to evolve. Attitudes toward the environment are often couched in what has become known as the environmental ethic. Finally, the environmental movement has become powerful politically, and environmentalism can be made to serve a political agenda.In revising this book, we have attempted to incorporate the evolving nature of environmental sciences and engineering by adding chapters as necessary and eliminating material that is less germane to today's students. We have nevertheless maintained the essential feature of this book -- to package the more important aspects of environmental engineering science and technology in an organized manner and present this mainly technical material to a nonengineering audience.This book has been used as a text in courses which require no prerequisites, although a high school knowledge of chemistry is important. A knowledge of college level algebra is also useful, but calculus is not required for the understanding of the technical and scientific concepts.We do not intend for this book to be scientifically and technically complete. In fact, many complex environmental problems have been simplified to the threshold of pain for many engineers and scientists. Our objective, however, is not to impress nontechnical students with the rigors and complexities of pollution control technology but rather to make some of the language and ideas of environmental engineering and science more understandable.

Writing for engineers working in the area of air pollution control systems, Cooper (U. of Central Florida) and Alley (emeritus, Clemson U.) present a textbook describing the philosophy and procedures for systems design. The primary purpose of the text is to aid in formal design training, although general foundational information on air pollution and its control does provide the background for the former. Chapters cover process design, particulate matter, cyclones, electrostatic precipitators, fabric filters, particulate scrubbers, auxiliary equipment, properties of gases and vapors, VOC incinerators, gas adsorption and absorption, biological controls, atmospheric dispersion modeling, and indoor air quality and control. The CD-ROM contains solutions to exercises from the text. Annotation copyrighted by Book News, Inc., Portland, OR

Anthropogenic sources of air pollution / Chinmay Mallik, Max Planck -- Biogenic sources of air pollution: / Harpreet Kaur and Ruchi Kumari -- Transport of air pollutants / Naveen Chandra and Vineet Goswami -- Methods for measurement of air pollutants / S. Tiwari and N. Mishra -- Air pollution modelling apects, an overview / Monojit Chakraborty, Sangeeta Bansal, Renu Masiwal, Amit Awasthi -- Indices used for assessment of air quality / Prashant Rajput, Gyanesh Kumar Singh and Tarun Gupta -- Impact of air pollution on the environment and economy / Saurabh Sonwani and Vandana Maurya -- Effects of air pollution on human health / Priyanka Kulshrestha -- Air pollution in mega cities / Arti Choudhary, Manisha Gaur and Anuradha Shukla -- Cost effective technologies used to curb air pollution / Ravi Singh1and Saumya Singh -- Chemical and isotopic characterization of atmospheric contaminants / Vineet Goswami and Naveen Chandra -- Air pollution control by policies and laws / Ruchi Singh and Amit Kumar

A panel of respected air pollution control educators and practicing professionals critically survey the both principles and practices underlying control processes, and illustrate these with a host of detailed design examples for practicing engineers. The authors discuss the performance, potential, and limitations of the major control processes-including fabric filtration, cyclones, electrostatic precipitation, wet and dry scrubbing, and condensation-as a basis for intelligent planning of abatement systems,. Additional chapters critically examine flare processes, thermal oxidation, catalytic oxidation, gas-phase activated carbon adsorption, and gas-phase biofiltration. The contributors detail the Best Available Technologies (BAT) for air pollution control and provide cost data, examples, theoretical explanations, and engineering methods for the design, installation, and operation of air pollution process equipment. Methods of practical design calculation are illustrated by numerous numerical calculations.

Air pollution control can be approached from a number of different engineering disciplines environmental, chemical, civil, and mechanical. To that end, Noel de Nevers has written an engaging overview of the subject. While based on the fundamentals of chemical engineering, the treatment is accessible to readers with only one year of college chemistry. In addition to discussions of individual air pollutants and the theory and practice of air pollution control devices, de Nevers devotes about half the book to topics that influence device selection and design, such as atmospheric models and U.S. air pollution law. The generous number of end-of-chapter problems are designed to develop more complex thinking about the concepts presented and integrate them with readers personal experienceincreasing the likelihood of deeper understanding.

Catalytic Air Pollution Control: Commercial Technology is the primary source for commercial catalytic air pollution control technology, offering engineers a comprehensive account of all modern catalytic technology. This Third Edition covers all the new advances in technology in automotive catalyst control technology, diesel engine catalyst control technology, small engine catalyst control technology, and alternate sustainable fuels for auto and diesel.

Managing the nation's air quality is a complex undertaking, involving tens of thousands of people in regulating thousands of pollution sources. The authors identify what has worked and what has not, and they offer wide-ranging recommendations for setting future priorities, making difficult choices, and increasing innovation. This new book explores how to better integrate scientific advances and new technologies into the air quality management system. The volume reviews the three-decade history of governmental efforts toward cleaner air, discussing how air quality standards are set and results measured, the design and implementation of control strategies, regulatory processes and procedures, special issues with mobile pollution sources, and more. The book looks at efforts to spur social and behavioral changes that affect air quality, the effectiveness of market-based instruments for air quality regulation, and many other aspects of the issue. Rich in technical detail, this book will be of interest to all those engaged in air quality management: scientists, engineers, industrial managers, law makers, regulators, health officials, clean-air advocates, and concerned citizens.

In the debate over pollution control, the price of pollution is a key issue. But which is more costly: clean up or prevention? From regulations to technology selection to equipment design, Air Pollution Control Technology Handbook serves as a single source of information on commonly used air pollution control technology. It covers environmental regulations and their history, process design, the cost of air pollution control equipment, and methods of designing equipment for control of gaseous pollutants and particulate matter. This book covers how to: Review alternative design methods Select methods for control Evaluate the costs of control equipment Examine equipment proposals from vendors With its comprehensive coverage of air pollution control processes, the Air Pollution Control Technology Handbook is a detailed reference for the practicing engineer who prepares the basic process engineering and cost estimation required for the design of an air pollution control system. It discusses the topics in depth so that you can apply the methods and equations presented and proceed with equipment design.

This is an all new book designed to provide you the practical information and data you need for indoor air pollution control! Presented early in the book is theory as support for the applications that follow; including a synthesized review of the significant literature on controlling air pollution. Practical applications-largely from the author's own experience-deal with 1) How to conduct indoor air quality investigations in both residences and public access buildings, 2) Indoor air quality mitigation practice, and 3) Case histories. This book will be very useful to consultants and other professionals who grapple to solve real world problems. And it will make an excellent textbook for new courses in indoor air quality. Indoor Air Pollution Control will be used for control and prevention of contaminated air in homes, apartment buildings, office buildings (large and small), hospitals, auditoriums, and other public buildings.