This book provides engineers and students with a general framework focusing on the processes of designing new engineering products. The procedures covered by the framework lead the reader to the best trade-offs to ensure maximum satisfaction of the customer's needs, meeting the lowest cost expectations, ensuring the lowest environmental impact and maximising profits and best positioning in the marketplace. Chapters discuss the engineering tools that are compatible with these goals and sustainable activity. - The design process is defined in terms of operators acting over the information space - The information content is defined as a difference of entropies - Creation and destruction of entropy are defined as procedures of the design process

This book presents select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2018). The book covers mechanical design areas such as computational mechanics, finite element modeling, computer aided designing, tribology, fracture mechanics, and vibration. The book brings together different aspects of engineering design, and will be useful for researchers and professionals working in this field.

This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.

The 33 papers presented in this book were selected from amongst the 97 papers presented during the sixth edition of the International Conference on Integrated Design and Manufacturing in Mechanical Engineering during 28 sessions. This conference represents the state-of-the-art research in the field. Two keynote papers introduce the subject of the Conference and are followed by the different themes highlighted during the conference.

This book presents select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2020). The book focuses on latest research in mechanical engineering design and covers topics such as computational mechanics, finite element modeling, computer aided engineering and analysis, fracture mechanics, and vibration. The book brings together different aspects of engineering design and the contents will be useful for researchers and professionals working in this field.

This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on product design and advanced manufacturing processes, intelligent solutions for Industry 4.0, covers topics in ICT for engineering education, describes the numerical simulation and experimental studies of milling, honing, burnishing, grinding, boring, and turning, as well as the development and implementation of advanced materials. Based on the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2021), held on June 8-11, 2021, in Lviv, Ukraine, this first volume of a 2-volume set provides academics and professionals with extensive information on trends, technologies, challenges and practice-oriented experience in the above-mentioned areas.

This book presents a selection of papers related to the fifth edition of book further to the International Conference on Integrated Design and Manufacturing in Mechanical Engineering. This Conference has been organized within the framework of the activities of the AIP-PRIMECA network whose main scientific field is Integrated Design applied to both Mechanical Engineering and Productics. This network isorganized along the lines of a joint project: the evolution, in the field of training of Integrated Design in Mechanics and Productics, in quite close connection with the ever changing industrial needs over the past 20 years. It is in charge of promoting both exchanges of experience and know-how capitalisation. It has a paramount mission to fulfil, be it in the field of initial and continuous education, technological transfer and knowledge dissemination through strong links with research labs. For the second time, in fact, the IDMME Conference has been held abroad and, after Canada in 2000, the United Kingdom, more particularly Bath University, has been retained under the responsibility of Professor Alan Bramley, the Chairman of the Scientific Committee of the conference. The Scientific Committee members have selected all the lectures from com mplete papers, which is the guarantee for the Conference of quite an outstanding scientific level. After that, a new selection hasbeen carried out to retain the best publications, which establish in a book, a state-of-the-art analysis as regards Integrated Design and Manufacturing in the discipline of Mechanical Engineering.

The present state of the art of dam engineering has been ronmental, and political factors, which, though important, attained by a continuous search for new ideas and methods are covered in other publications. while incorporating the lessons of the past. In the last 20 The rapid progress in recent times has resulted from the years particularly there have been major innovations, due combined efforts of engineers and associated scientists, as largely to a concerted effort to blend the best of theory and exemplified by the authorities who have contributed to this practice. Accompanying these achievements, there has been book. These individuals have brought extensive knowledge a significant trend toward free interchange among the pro to the task, drawn from experience throughout the world. fessional disciplines, including open discussion of prob With the convergence of such distinguished talent, the op lems and their solutions. The inseparable relationships of portunity for accomplishment was substantial. I gratefully hydrology, geology, and seismology to engineering have acknowledge the generous cooperation of these writers, and been increasingly recognized in this field, where progress am indebted also to other persons and organizations that is founded on interdisciplinary cooperation. have allowed reference to their publications; and I have This book presents advances in dam engineering that attempted to acknowledge this obligation in the sections have been achieved in recent years or are under way. At where the material is used. These courtesies are deeply ap tention is given to practical aspects of design, construction, preciated.

This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into eight main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.

This book contains the papers presented at the XXX International Congress INGEGRAF, “Digital Engineering, its application in Research, Development and Innovation”, held on 24–25 June 2021 in Valencia, Spain. The book reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, engineering and construction, aeronautics and aerospace design and modeling. The book has six sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers, and experts in a range of industrial engineering subfields with extensive information to support their daily work; but also they are intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.